Model # VTH0052|Store SKU # 1001801623
Efficient roof ventilator used to ventilate roof areas of 400 to 500 sq. feet. Unlike the turbine, the 302 static ventilators does not require to rotate to prevent water or snow infiltrations. Its unique storm proof deflector system prevents infiltrations while at the same time capturing the wind flow from any direction and at velocities as low as 4 miles/hr. The flashing of the model is adjustable for slopes varying between 1/12 to 15/12. In compliance with the National Building Code of Canada, the National Air Flow Standards, CSA Standards, ICC-ES Standards & Miami Dade US Standards,
This Imperial 8-inch by 10-inch Rectangular End Cap is designed to terminate the end of a trunk or main duct run. The end cap can be installed with sheet metal screws for a secure fit (screws sold separately). Suitable for most heating, venting and air conditioning applications, the end cap is made from 30-gauge galvanized steel for rust resistance and long-lasting durability.
Very efficient roof ventilator used to ventilate roof areas of 1000 to 1200 sq. feet. Unlike the turbine, the 301 static ventilators does not require to rotate to prevent water or snow infiltrations. Its unique storm proof deflector system prevents infiltrations while at the same time capturing the wind flow from any direction and at velocities as low as 4 miles/hr. The flashing of the model is adjustable for slopes varying between 1/12 to 15/12. In compliance with the National Building Code of Canada, the National Air Flow Standards, CSA Standards, ICC-ES Standards & Miami Dade US Standards,
The Master Flow Aluminum Slant Back Roof Louver is designed for attic ventilation. The fully enclosed hood deters rodent and insect infiltration and leaf and pine needle clogging. The aluminum slant back roof louver is an excellent choice against weather infiltration, especially in steep-slope applications. Each vent offers a full 60 sq. -Inch of net free ventilating area (NFA).
The Imperial 4-6 inch Plastic Roof Exhaust Cap helps to remove humidity from the exhaust area, limiting moisture that can cause damage to your home. It features UV-resistant polypropylene construction, and a damper to stop outside elements from entering the vent. Use it to effectively exhaust kitchen and bath fans through the roof. This exhaust cap is not intended for clothes dryer venting.
