Everbilt 5/16 x 5 x 2-1/2-in U Bolt in Zinc - 1pc

Paulin 1/4 x 2-1/2-inch Hex Head Lag Bolt - 18.8 Stainless Steel

Lag Bolts are also called Lag Screws and are recommended for all types of wood or metal to wood construction where standard wood or deck screws are too short or light and where nails or spikes lack sufficient strength. They can be installed in wood with pre-drilled pilot holes or in masonry with Lag Shields. In wood to wood applications the non-threaded shank allows the second piece to be drawn tightly to the first piece of wood. Flat or fender washers are suggested to provide a larger bearing surface and to prevent the head of the lag bolt from imbedding in the first piece of wood. Stainless 18.8 Steel provides one of the highest degree of corrosion resistance when compared to a steel zinc finish. Ideal for outdoor projects such as decks, fences, wood structures and with treated lumber installations.

Everbilt 3/8 x 7 x 3-in Square U-Bolt in Zinc - 1pc

Everbilt's Square U-Bolt provide a method for anchoring pipe, conduit or tubing to a fixed surface. Two hex nuts and a plate are included for ease of installation. Ideal for automotive, plumbing, residential and industrial applications. Zinc-plating provides moderate corrosion resistance. U-bolt measurements are as follows: diameter (D) x inside length (L) x width (W) between legs.

Everbilt 3/16-inch x 1-1/2-inch Eye Bolt with Hex Nut, Zinc - 1 pc.

Everbilt's Eye Bolt with Hex Nut is designed to easily attach ropes or cables to surfaces like wood and metal. This bolt has a machine screw thread with a blunt end. Ideal for light-duty applications. Zinc plating provides moderate rust-resistance.

Everbilt 2-1/2-in Ring Bolt & Nut in Zinc - 1pc

Everbilt's Ring Bolt and Nut is ideal for general rope tie down applications. Use with spring bolt and spring snaps for easy on and off connection. Hitching rings swivel 180-degrees, when mounted, which provides versatility and ease of use. Eye bolt with nut intended for through bolt connections.