FibaTape Perfect Finish Ultra Thin Drywall Tape

CGC Sheetrock All Purpose Drywall Compound, Ready-Mixed, 2L Pail

CGC and SYNKO Ready-Mixed Joint Compounds are high quality drying-type products which are used for taping, filling and finishing joints, trims and surfaces of gypsum board. These vinyl-based formulations are specially premixed to a creamy, smooth consistency and are ready to use right from the container. They are easy to apply and are available for hand or machine-tool applications. Protect wet joints and product from freezing. Choose CGC and SYNKO products for professional results.

CGC Sheetrock Sheetrock 20, Setting-Type Drywall Compound, 11 kg Bag

CGC and SYNKO premium setting type compounds are the professional's choice of compounds for interior gypsum panels and exterior gypsum ceiling boards. CGC's chemically setting compounds rapidly harden (approx. 90 minutes, 45 minutes, 20 minutes) and have low shrinkage allowing for same day joint finishing. These products feature exceptional bond strength (virtually unaffected by humidity) and are ideal for heavy fills (shrinkage crack resistance). In addition, CGC and SYNKO setting-type compounds can be used for filling voids in interior concrete ceilings and above-grade concrete surfaces. CGC and SYNKO premium setting type compounds should be your choice for a professional finish.

CGC Sheetrock Drywall Paper Joint Tape, 2-1/16 in. x 75 Ft. Roll

CGC and SYNKO reinforcing tapes add strength and crack resistance for smooth concealment of flat joints and inside corners. A special high-strength fibre paper tape for use with CGC & SYNKO joint compounds in reinforcing joints and corners in gypsum drywall and veneer plaster finish interiors. Exceptional wet and dry strength; resists tearing under tools. The tape is lightly sanded for increased bond and lies flat for easy concealment, is positively center creased which simplifies application in corners.

CGC Strait-Flex 3 in. x 100 ft. Mid-Flex Flexible Paper Corner Bead

Mid-Flex, a laminated composite corner tape from Strait-Flex, beautifully finishes outside corners, off angles and vaulted ceilings. Mid-Flex 300 is also a great choice when replacing damaged metal corner bead. This 3 in. tape features a pre-finished surface with a PUR-laminated nose ensuring perfect corners without paper fuzz-up during finishing and sanding. The tape's outer edge features a diamond punch pattern for a superior bond, faster drying, with no rippling or blistering. To apply, measure and cut to length, then fold in half at center crease with print side facing out. For repairing damaged corner bead, tap the damaged area of the corner bead to be recessed below the corner's edge. Apply all-purpose compound to corner. Press Mid-Flex 300 into the wet compound, adjust to create a straight line and wipe down with a taping knife using additional pressure to the outer edge of the tape. Immediately apply a light skim coat to the perforated edges and let dry. Apply final coat, let dry and sand.