Model # C14-126|Store SKU # 1000103778
Connect and insulate 2 or more bare copper wires. Each wire connector is constructed of durable flame-retardant material to help provide long-lasting use.
Butt Splice Kit is used for waterproof installation or repair of #8 - #2 AWG copper cable. Easy to use polyolefin seals with heat gun or torch eliminating messy epoxies, tapes or mastics. Instructions: Slide heat shrink tubing over one conductor. Remove 5/8" insulation from conductors to be spliced. Insert stripped conductor in the butt splice. Tighten set screw to the lb per inch recommendations on the packaging and check for continuity of wire. Move heat shrink tube over splice and center. Heat tubing with torch or heat gun (MSTR-TORCH). Tubing shrinks at 350 F. Start in the middle of the tube, apply heat moving lengthwise back and forth over tubing. DO NOT TRAP AIR IN MIDDLE OF SPLICE KIT. When tubing has assumed the splice configuration and mastic seal is visible on each end of tubing, discontinue heating.
To connect two or more copper wires together in a box or enclosure
Jar of assorted natural, red, green, blue and yellow cable ties. 500 x 4 in., 300 x 7.5 in. and 50 x 11 in.
Butt splices are UL/CSA Listed. Quick and reliable crimp-type wire connections color-coded by wire gauge size with vinyl insulated barrel. Dependable and easy to use, Gardner Bender terminals and wiring accessories offer the high quality and application flexibility that professionals demand. Look to Gardner Bender for secure wire connection options.
