Generac Scheduled Maintenance Kit for Home Standby Generators with 10 kW 533cc Engines

Generac Auxiliary Transfer Switch Contact Kit

The auxiliary transfer switch contact kit allows a single large electrical load to be locked out from generator operation. If a home is equipped with electrical heat or multiple central air conditioning units, this device allows the generator transfer switch to interrupt the control wire, breaking the signal needed for the appliance to turn on.

Generac 4.6L 80W Liquid-Cooled Generator Scheduled Maintenance Kit

A scheduled maintenance program ensures the generator system is always in top operating condition and warranty requirements are being met. Generac's scheduled maintenance kits provide all the hardware necessary to perform complete routine maintenance on a Generac automatic standby generator. Oil must be purchased separately based upon manufacturer recommendations. Maintenance is recommended at every 200 hours or 2 years. The Generac 4.6-Liter 80 kW Liquid-Cooled Generator Scheduled Maintenance Kit comes with an oil filter, an air filter, pre-cleaner, 8 spark plugs, a spark plug wrench, an oil funnel, a chamois and a reminder sticker.

Energizer Parallel Kit for eZV P-Series Inverter Generators

Connect two Energizer eZV P-series inverter generators with this kit. No fussing with ground wires or multiple ports, this kit connects safely to each generator with a single port. The total power output of both generators combine through the kit, allowing you to power large events or tasks.

Generac Cold Weather Kit - 7kW & 7.5kW PowerPact 426cc

The Generac 6808 Cold Weather Kit is intended for use with the PowerPact series generators. The kit consists of an automatic thermostatically controlled battery pad warmer, crankcase heater, and breather warmer. When temperatures fall below an acceptable level, the thermostat activates the battery warmer maintaining optimum battery temperature and also activates the crankcase oil heater for the best generator starting. This kit is recommended for generators installed in regions where the temperature regularly falls below 32 degrees (Fahrenheit). When installing a cold weather kit, it is required that the oil is replaced with 5W-30 synthetic for better engine start capability.