Model # 6482|Store SKU # 1001168363
Oregon Tune-up Kit for Walk-behind Mowers (R-01-109) Oregon replacement parts are built to meet or exceed your original equipment standards. Guaranteed.
The 40V max XGT Brushless 10" Telescoping Pole Saw easily adjusts from 9-ft. to 13-ft. in length to allow the user to reach higher and trim branches with ease. The Makita-built brushless motor delivers the power of a 35cc gas pole saw. The 40V max XGT delivers up to 150 cuts in 4x4 cedar on a single charge of an XGT 4.0Ah battery, allowing the user to cut and trim for longer periods of time. The Pole Saw has convenience features that include a lateral chain tensioner with a single stud for efficient chain retention and a captured bar nut that is retained in the sprocket cover for easier setup and maintenance. There is also a translucent bar oil tank with a large opening that aids in adding oil and keeping the bar properly lubricated. Additional features include Active Feedback-Sensing Technology (AFT), which electronically turns off the motor if the rotation of the attachment is suddenly forced to stop
Generac's 9855 HomeLink Upgradeable Manual Transfer Switches are now easier to install, expand, and maintain than ever before. To meet the requirements of 2017 National Electric Codes, improved 30-amp and 50-amp HomeLink models can be used with any portable generator featuring compatible GFCI outlets. With interchangeable circuit breakers that simplify the reconfiguration process required for replacing or expanding from 8 to 16 circuits, HomeLink switches can be used to provide power to hard-wired loads such as your home's furnace, well pump or lights. Thanks to the re-launch of Generac's HomeLink Upgradeable Manual Transfer Switches, protecting your desired loads and transitioning from portable power to an automatic standby solution is easier than ever before
The RYOBI 18V ONE+ HP Brushless Edger Kit delivers 60% faster cutting and is a true gas replacement without the maintenance and hassle. ONE+ HP technology combines a brushless motor, advanced electronics, and high performance lithium technology, to power through the toughest trenching around your driveways, sidewalks, and flower beds with 2X longer runtime using a 4Ah battery. Functioning as a dedicated edger with an 8" blade, it easily adjusts from 0.5" to 2.25" using the single point height adjustment. This allows you to achieve your ideal depth. The 5" rear wheel along with the blade indicator allow for consistent and accurate edging. Achieve maximum control with the variable speed trigger. When it is time to change the blade, the spindle lock helps in making the task quick and easy.
The Generac 6482 Maintenance Kit is for standby home generators with 8-Kilowatt 410cc engines. Scheduled maintenance is a necessity for all standby generators. The Generac 6482 Air Cooled Scheduled Maintenance Kit offers all the hardware necessary to perform maintenance on your Generac air-cooled generator. Maintenance is recommended every 200-hours or 2-years and if your generator is running in a dusty environment a more frequent maintenance schedule may be required. The Generac 6482 Maintenance Kit contains an air filter, oil filter, oil-funnel, spark plugs, wrench, chamois, instruction manual and preventative maintenance reminder sticker (Oil must be purchased separately). Further maintenance details can be found in the generator's owners manual
