Hilti 0.63 inch x 1.97 inch HIT Composite Mesh Sleeves for Chemical Anchoring (20-Piece)

Model # 375981|Store SKU # 1001676546

Overview

Model # 375981 Store SKU # 1001676546

Hilti's line of HIT Composite Mesh Sleeves for Chemical Anchoring are a great way to complete your anchoring project into hollow base material. Used with the entire Hilti Chemical Anchoring System, these composite mesh sleeves allow for dependable fastenings and a quick cure over a wide range of temperatures. Some common applications that these sleeves are used for are sun blinds / awnings, electrical installations, sanitary installations, handrails, banisters / railings, window gratings and gates. Get started fastening into hollow base material more effectively with these Hilti HIT Composite Mesh Sleeves for Chemical Anchoring.

Includes (20) 0.63 in. x 1.97 in. Hilti HIT composite mesh sleeves

Centering ring holds anchors rod in place and stops mortar back flow out of the composite sleeve

Equal performance to metal mesh sleeves

Attaches securely to other Hilti HIT composite mesh sleeves of the same diameter

Specifications

Dimensions

Assembled Depth (in inches): 8.0
Assembled Height (in inches): 2.0
Assembled Weight (in lbs): 0.7
Assembled Width (in inches): 3.0
Packaged Depth (in inches): 8
Packaged Height (in inches): 2
Packaged Weight (In lbs): 0.7
Packaged Width (in inches): 3

Details

Anchor Diameter (In.): 3/8
Application Strength: Light-Duty
Certified: No
Finish: Unfinished
Material: Cement
Maximum Weight Capacity (lb.): 0
Package Quantity: 20
Product Length: 1-31/32
Type: Round Tube

Warranty / Certifications

For more information please contact 1-800-628-0525.

Related Products

Hilti 1/4 inch x 3-1/2 inch KH-EZ Concrete and Masonry Screw Anchor (100-Piece)

The Hilti collection of Kwik Hus-EZ Concrete and Masonry Screw Anchors are the perfect anchoring solution for various base materials, such as concrete (cracked), concrete (light weight), concrete (light weight over metal deck), concrete (untracked) and masonry (grout-filled CMU). These anchors will get the job done for multiple applications. Among the most common uses are glazing, windows and storefronts; racking and shelving; attaching railings, handrails and ledgers (inside environment); anchoring formwork and tilt-up braces, sill plates, perimeter walls and seismic braces; and seismic braces. If you want a concrete or masonry anchor that is quick and easy to install, fully removable, or seismic approved, then the Hilti Kwik Hus-EZ Concrete and Masonry Screw Anchor is the anchor for you.

View Details

Hilti HS-SC 6 inch TE-C Kwik Bolt Mechanical Setting Tool

Use the Hilti Mechanical Setting Tool KB 6 in. TE-C with Hilti Kwik Bolts. Ideal for overhead applications. Eliminate the need for a hammer where access is limited or work space is congested.

View Details

Hilti HIT-RE 500 V3 11.1 fl. oz. Epoxy Adhesive

The Hilti RE-500 V3 11.1 fl. oz. Epoxy Adhesive offers the highest performing, most reliable anchoring solutions in the industry. Following best in class epoxy anchors such as the RE 500 and RE 500-SD, Hilti introduces its next generation of epoxy anchoring systems HIT-RE 500 V3. This superior performing anchor was designed with the contractor in mind. RE 500 V3 is not only the most productive epoxy anchoring system in the industry but also the most reliable. Shorter cure times and the lowest base material installation temperatures provide contractors with the ultimate flexibility and performance. ICC-ESR-3814 (International Code Council) for cracked and uncracked concrete. Made for structural connections with post-installed rebar (ex: extension/connection to walls, slabs, stairs, columns, foundations, etc.).

View Details

Hilti 5/8 inch x 5-1/2 inch Kwik Hus EZ Corrosion-Resistant Coating Screw Anchor for Concrete (15-Piece)

Built with added corrosion protection to withstand some of the toughest of environmental conditions, Hilti's screw anchors KH-EZ CRC and KH-EZ SS316 are the ideal solutions for applications requiring ICC-ES approval for cracked concrete and seismic design. With a mechanically galvanized coating meeting ASTM B695 Class 55 specifications,Hilti's screw anchor KH-EZ CRC is engineered for use in outdoor or damp environments. Offering the industry's best corrosion protection, the screw anchor KH-EZ SS316 is manufactured using grade 316 stainless steel and utilizes carbide bits welded to the anchor for easy installation into concrete or grout-filled CMU.

View Details