Howell Galvanized Steel Stationary Dock Mud Pad

Model # DE94102F|Store SKU # 1000174140

Overview

Model # DE94102F Store SKU # 1000174140

Stationary Dock Mud Pad is 1/8-inch nominal hot dip galvanized steel with 7/16" holes for 3/8" carriage bolts. The Mud Pad is used for soft bottom dock applications. It allows the dock's leg pipe to extend through the mud to the lake bed for lateral support. The corners are pointed for further strength.

1/8" Hot dip galvanized steel

7/16" holes for 3/8" carriage bolts

Use for soft bottom applications

Allows for leg pipe to extend into the lake bed

Manual

STATIONARYDOCKHOWTOGUIDE

You will need Adobe Acrobat Reader to view PDF documents.

Specifications

Dimensions

Assembled Depth (in inches): 11.5
Assembled Height (in inches): 2.5
Assembled Weight (in lbs): 5.6
Assembled Width (in inches): 11.5
Packaged Depth (in inches): 11
Packaged Height (in inches): 3.5
Packaged Weight (In lbs): 5
Packaged Width (in inches): 11

Details

Country of Origin: CA-Canada
Dock Hardware Type: Hardware Kit
Duty Rating: Standard
Material: Steel
Type: Plate

Warranty / Certifications

2 year Limited Warranty. For more information contact our customer service department at 1-800-295-3625

Related Products

Howell 10 ft. Galvalume Stationary Dock Leg Pipe

This 10 ft. Stationary Dock Leg Pipe is manufactur... See More +

This 10 ft. Stationary Dock Leg Pipe is manufactured from 5 gauge (1/4-inch) hot dip galvanized steel and aluminum. The aluminum and steel construction lends both strength and corrosion resistance to this dock leg. This leg pipe can easily be cut to any length.

See less -

View Details

Howell 6 ft. 8-inch Galvalume Dock Leg Pipe

Floating Dock Hardware component manufactured from... See More +

Floating Dock Hardware component manufactured from 5 Gauge (1/4") hot dip galvanized steel. 6'8" Galvalume Leg Pipe is manufactured using both aluminum and steel for strength an non corrosion attributes. Can easily be cut to size, use with all stationary components

See less -

View Details

Howell Floating Dock Corner Plate with Anchor Chain Bar

Floating Dock Hardware component manufactured from... See More +

Floating Dock Hardware component manufactured from 5 Gauge (1/4") hot dip galvanized steel. Slot size is 9/16". Use Corner Plate with Anchor Chain Bar in the corners to add strength and tie up a chain anchor to stabilize the dock

See less -

View Details

Howell Floating Dock Heavy Duty Pin for T-Connector

Floating Dock Hardware component manufactured from... See More +

Floating Dock Hardware component manufactured from 5 Gauge (1/4") hot dip galvanized steel. Heavy Duty Pin for T-Connectors includes the hitch pin to ensure connector pin stays in position on the connector

See less -

View Details