IPEX Poly Pipe Utility 1/2 inch x 10 feet 50 psi

Model # 018500|Store SKU # 1000422932

Overview

Model # 018500 Store SKU # 1000422932

Standard poly is suitable for pressure applications up to 50 psi. Requires only simple hand tools for installation using a wide variety of ID-size fittings. Smooth interior walls allow a lifetime of operation without loss of carry capacity by eliminating build-up of calcium and other deposits: the water distribution line stays cleaner longer, providing better water quality.

Suitable for low pressure (50psi) applications

Not for use with compressed gas or air.

Maximum working temperature of 60°C (140°F)

ID Sized Pipe

Ideal for low-pressure landscape irrigation

Manual

Poly pipe install guide-pdf.pdf
Guide installation tuyau en polyethylene-pdf.pdf

The Home Depot will provide an accessible format of PDFs upon request. Please contact us at
1-800-628-0525.

Specifications

Dimensions

Assembled Depth (in inches): 6.25
Assembled Height (in inches): 29.5
Assembled Weight (in lbs): 4.4
Assembled Width (in inches): 29.5
Packaged Depth (in inches): 29.5
Packaged Height (in inches): 29.5
Packaged Weight (In lbs): 4.4
Packaged Width (in inches): 6.25

Details

Actual Inside Diameter (in.): 1/2"
Actual outside diameter (in.): 1/2
Application: Water Supply
Fitting Size(in.): 1-1/2
Nominal Inside Pipe Diameter (in.): 1/2"
Pack Size: 1
Product Length (ft.): 100
Use With: Clean Water

Warranty / Certifications

For product warranty details, see the Warranty and Limitation of Liability section under Terms and Conditions of Sale at www.ipexinc.com. You can also make Warranty inquiries through IPEX HomeRite Products Customer Service 1-866-777-8023.

Related Products

Great Lakes Copper Copper Pipe Type M 1/2-inch x 3 Foot Straight Length

Great Lakes Copper produces copper tube for the Canadian market. Each tube is fabricated to meet the highest industry standards.

View Details

Watts Nylon Barb Splicer 1 x1

Ideal for use with any tubing soft enough to accept a clamp style connection including vinyl and rubber.

View Details

Sioux Chief Coupling 3/8 inch PDQ Polypropylene 1/Bag

PDQ PolyPropylene(PP) push fittings are for cold water distribution systems. Fittings have integral stainless steel teeth and incorporate a release ring. Fittings have an integral o-ring connection. Tube end should be free of burrs or defects for a positive leak-free seal. Fittings are perfect for permanent or temporary service.

View Details

Sioux Chief 5/8 inch Barb Elbow X 1/2 inch MIP Plastic

Choosing this plastic barb fitting means you'll have an effective, economical alternative to brass. They are easy to use, and work with most flexible plastic tubing. Their solid construction makes them durable yet lightweight, and they can be re-used which makes this barb fitting an excellent choice for your project.

View Details