Model # 462031|Store SKU # 1001141055
These Washer Fill Hoses feature a space-saving 90-deg elbow and can be used to fill the washer with both hot and cold water. The part includes (2) high-quality nylon-braided hoses with (4) Hydro-Blue Steel anti-corrosive couplings with pre-installed EPDM washers. The hoses measure 6' L and feature a large diameter design for maximum water flow and 1700-PSI burst strength. This is an accessory that can be used across several brands; check to see if your model number is compatible. Replacing this accessory will require basic hand tools, but no disassembly of the appliance or repair experience. You must unplug the washing machine or shut off the house circuit breaker for the appliance before installing this part. Also make sure you turn off your hot and cold water supplies. Helpful Tip: We recommend replacing your washing machine's inlet hoses every 5 years to reduce the risk of hose failure and leaks.
The Everbilt washing machine drain pan is made of high-impact molded polypropylene plastic. A 1-piece injection molded design provides strength and durability preventing it from cracking, rusting, or corroding. The pan protects your floor from scuffs, spills and overflows including harsh detergents and bleach. The drain pan has 2 formed punch-out holes, where an optional 1 in. PVC male drain adapter (included) can be attached to release the water collection into a bottom drain outlet. This washer pan works well with front-load washing machines. The low-profile design allows for clearance when opening pedestal drawers (leveling legs may need to be fully extended).
Oatey Quadtro Washing Machine Outlet Boxes are available for commercial and residential applications that require supply valves and waste drain recessed into the wall.
UV Hot and Cold Washing Machine Connector Kit (2 Pack). Braided Stainless Steel-3/4-Inch Hose Fitting , 6-Feet (72-Inch) Length. 15 mm thick stainless steel braided Hose for easy and correct washing machine water connection.
Water Hammer Arrestor 3/4 in. For Washing Machine. 3/4 in. MHT x 3/4 in. FHT, for use with Washing Machine Valves, Type Aa For Single Fixture. UPC Listed, ASSE 1010 Certified, IPC Compliant. Prevent water hammer noise with these devices, which absorb the shock and vibrations caused when water flow through a fixture is suddenly stopped. Install them near the fixture's water supply shut-off valve.
