NOBODY BEATS OUR PRICES. GUARANTEED.Terms & Conditions

Kidde Worry-Free Hardwire Smoke and Carbon Monoxide Alarm with 10-year Sealed Battery Backup

Model # i12010S-CO-CA|Store SKU # 1000806867

Overview
Specifications
Reviews

Overview

Model # i12010S-CO-CA Store SKU # 1000806867

Hardwire (120V) Talking Combination (Smoke and CO Alarm with 10yr sealed battery backup . Never need to replace the battery for the life of the alarm will interconnect with all Kidde models.

  1. CSA 6.19-01 approved - Replacement date is 120 months after installation
  1. voice warning clearly alerts you if the unit has detected smoke, co or low battery
  1. intelligent Technology - detects real fires quickly and reduce nuisance alarm
  1. Never replace battery - lasts 10 years
  1. Test and reset button - to test circuitry and resets alarm
  1. No late night chirps

Specifications

Dimensions

Assembled Depth (in inches)
1.5
Assembled Height (in inches)
5.25
Assembled Weight (in lbs)
0.74
Assembled Width (in inches)
5
Packaged Depth (in inches)
12
Packaged Height (in inches)
5.91
Packaged Weight (In lbs)
0.8
Packaged Width (in inches)
5.91

Details

Battery Backup
Yes
Certified
Yes
Country of Origin
CN-China
Outer Material
Plastic
Power Type
Hardwired
Product Type
Carbon Monoxide Detector
Voice Alert
Yes
Wi-Fi Enabled
No

Warranty / Certifications

10 Year - call 1-800-628-0525
Worry-Free Hardwire Smoke and Carbon Monoxide Alarm with 10-year Sealed Battery BackupPhoto of productHardwire (120V) Talking Combination (Smoke and CO Alarm with 10yr sealed battery backup . Never need to replace the battery for the life of the alarm will interconnect with all Kidde models.
Kidde
1000806867
CAD68.71
The Home Depot Canada
Worry-Free Hardwire Smoke and Carbon Monoxide Alarm with 10-year Sealed Battery Backup is rated 3.2 out of 5 by 9.
  • y_2019, m_10, d_15, h_22
  • bvseo_bulk, prod_bvrr, vn_bulk_2.0.13
  • cp_1, bvpage1
  • co_hasreviews, tv_0, tr_9
  • loc_en_CA, sid_1000806867, prod, sort_[SortEntry(order=SUBMISSION_TIME, direction=DESCENDING)]
  • clientName_homedepot-canada
  • bvseo_sdk, java_sdk, bvseo-4.0.0
  • CLOUD, getAggregateRating, 30ms
  • REVIEWS, PRODUCT
Rated 5 out of 5 by from The best non-wifi unit on the market IMO These units are easy to install(please read and follow the instructions) and have been performing very well in my home and the many homes that I have installed them in. Kidde does stand behind there product. If it starts chirping for reasons other than a fault diagnosed via the instructions that you can remedy, call up Kidde and they will replace it. Unfortunately the folks that are having problems with the install are just not following the directions properly. As a Master Electrician having installed many of these units, I find them to be the best non-wifi unit on the market. PLEASE NOTE - You should not mix brands of devices or even models of the same brand unless you call the manufacturer and confirm they are compatible. Please connect this to 120v. The battery is only for back-up. Read and keep the instructions. You should do things like clean and test them as per manufacturer instructions. If you are having problems with them call the manufacturer or a professional Electrician!;')
Date published: 2019-03-09
Rated 5 out of 5 by from SUPER EASY TO SWITCH OUT THE OLD ONE Thankfully manufacturers keep their core line based on a common chassis - my previous KIDDE alarm time expired; it was basically unplug the old one, plug in the new one, twist lock it in place, test it and leave it to work.
Date published: 2018-12-13
Rated 2 out of 5 by from Cannot turn off the false alarm I bought the unit 4 years ago. The unit was supposed to work for 10 years. It starts a false alarm after a power outage at my home. I cannot stop the loud noise, and had to take it down and check the whole unit. Only one place at back can turn off the alarm, and the turning off is permanent. 10-years worry free? don't believe it.
Date published: 2018-12-05
Rated 5 out of 5 by from Works great! Easy to install Installed this quickly and didn’t have any difficulties. This product linked with my existing hard-wired Kiddie alarms.
Date published: 2018-01-30
Rated 4 out of 5 by from Great Combination This is perfect, especially if you already have a hard wired smoke detector, simply replace it with this two in one CO2 and Smoke Alarm Combined.
Date published: 2018-01-25
Rated 1 out of 5 by from lived 1y of 10y life. No way to reset malfunction This expensive device is meant to last 10years, however after a routine test (pushing the button on the front) it started to chirp every 30s. There's no power reset feature, thus the only way to stop the chirp is to use the permanent turn off switch.
Date published: 2018-01-10
Rated 2 out of 5 by from Just purchased I have just purchased two of these and installed one of them; I will return the other one. I decided to keep one to see how it works. However, I already have a few complaints: a) The label does not say anything about the bracket type, or options to hook the unit up to the 120 V household electricity. If I had known that it runs on battery only then I probably would not have chosen it. Besides, the Homedepot associate who assisted me with the purchase was positive that the battery is just for backup power. b) After unpacking the item I found out that it's single-use. Seriously, for $60? Or maybe not. There is a "Turn off" switch in the back with a warning that reads "permanently". I expected to be able to turn it off, if it starts beeping, then turn it back on later. The Hush button, which seems to be the same as the Test button, supposedly allows the user to "silence" the unit for about 9 minutes. Can't test that, though, because I am afraid that I might have to disable the unit permanently if it really goes off. c) I ran the startup test, as per instructions. Apparently, all went well and the unit should now be acrtive. But there is a LED on the front that stays off. I expected it to light up green. I mean, all other smoke/CO detectors in my house have a front LED that goes green when in standby; this one doesn't. The information on the front reads "GREEN - STANDBY", so it should be green. Is the device activated and in standby mode? It's very confusing. d) A comment from the manufacturer posted for a similar product, also sold at Homedepot, indicates not to install such a detector in the furnace room or in the basement, unless it's a large room. Doesn't this defeat the purpose of a smoke/CO detector? I think that most furnaces are located in house basements. In my case, although there is a physical separator placed around the furnace, it's not airtight. Ocassionaly, people sleep in my basement; this is the reason why I want to install a CO detector there. Should I or should I not?
Date published: 2018-01-06
Rated 4 out of 5 by from Two in One It is great to have both CO2 and Smoke Alarm in one unit, easy to install. Works great.
Date published: 2017-11-22
  • y_2019, m_10, d_15, h_22
  • bvseo_bulk, prod_bvrr, vn_bulk_2.0.13
  • cp_1, bvpage1
  • co_hasreviews, tv_0, tr_9
  • loc_en_CA, sid_1000806867, prod, sort_[SortEntry(order=SUBMISSION_TIME, direction=DESCENDING)]
  • clientName_homedepot-canada
  • bvseo_sdk, java_sdk, bvseo-4.0.0
  • CLOUD, getReviews, 31ms
  • REVIEWS, PRODUCT
  • bvseo_sdk, java_sdk, bvseo-4.0.0
  • CLOUD, getContent, 29ms
  • QUESTIONS, PRODUCT
  • bvseo-msg: The resource to the URL or file is currently unavailable.;
<?xml version="1.0" encoding="utf-8"?>