Maintaining clean, safe stores is one of our top priorities.  Learn More

Kreg Tool Company Kreg Crosscut Station

Model # KMA4100|Store SKU # 1001619505

Overview

Model # KMA4100 Store SKU # 1001619505

Get miter saw quality from your circular saw! The Crosscut Station gives you the capabilities of a miter saw with just a circular saw and Kreg guided cutting. Crosscut boards wider than most compound miter saws can handle (up to 12 Inch/ 305mm at 90°). Make a variety of angle and miter cuts from 0° to 45° with the adjustable fence and positive stops at 0° and 45°. An MDF base and SureCut backboard act as a sacrificial surface for splinter-free cutting results. The MDF base also functions as a kerf line so you can clearly see the blades path and know exactly where your saw will cut every time. Use material support wings and the detachable blocks to cut long boards safely by supporting your offcuts. They pull out easily when more support is needed, and tuck back in when not in use. The Crosscut Station is quick to set up and easy to store away. Its compact design even makes it portable when you need accurate crosscuts and angle cuts on the go.

  1. Crosscut up to 12 Inches wide (305mm) and make a variety of miter cuts from 0° to 45°
  1. MDF base and backboard act as sacrificial surface for splinter-free cutting
  1. A kerf line you cut into the MDF base shows exactly where your saw will cut
  1. Material support wings with detachable blocks add offcut support for long pieces
  1. Works with left- or right-blade circular saws

Specifications

Dimensions

Assembled Depth (in inches)
5.13
Assembled Height (in inches)
16.5
Assembled Weight (in lbs)
8.04
Assembled Width (in inches)
9.13
Packaged Depth (in inches)
5.13
Packaged Height (in inches)
16.5
Packaged Weight (In lbs)
8.04
Packaged Width (in inches)
9.13

Details

Country of Origin
CN-China
Ideally Used With
Circular Saws
Power Tool Accessory Features
Universal
Power Tool Accessory Type
Saw Accessories

Warranty / Certifications

For more information, please contact 1-800-447-8735
Kreg Crosscut StationKreg Tool Company Kreg Crosscut StationGet miter saw quality from your circular saw! The Crosscut Station gives you the capabilities of a miter saw with just a circular saw and Kreg guided cutting. Crosscut boards wider than most compound miter saws can handle (up to 12 Inch/ 305mm at 90°). Make a variety of angle and miter cuts from 0° to 45° with the adjustable fence and positive stops at 0° and 45°. An MDF base and SureCut backboard act as a sacrificial surface for splinter-free cutting results. The MDF base also functions as a kerf line so you can clearly see the blades path and know exactly where your saw will cut every time. Use material support wings and the detachable blocks to cut long boards safely by supporting your offcuts. They pull out easily when more support is needed, and tuck back in when not in use. The Crosscut Station is quick to set up and easy to store away. Its compact design even makes it portable when you need accurate crosscuts and angle cuts on the go.
Kreg Tool Company
1001619505
CAD59.98
The Home Depot Canada
Kreg Crosscut Station is rated 4.6 out of 5 by 84.
  • y_2021, m_7, d_29, h_20
  • bvseo_bulk, prod_bvrr, vn_bulk_3.0.18
  • cp_1, bvpage1
  • co_hasreviews, tv_0, tr_84
  • loc_en_CA, sid_1001619505, prod, sort_[SortEntry(order=SUBMISSION_TIME, direction=DESCENDING)]
  • clientName_homedepot-canada
  • bvseo_sdk, java_sdk, bvseo-4.0.0
  • CLOUD, getAggregateRating, 102ms
  • REVIEWS, PRODUCT
Rated 5 out of 5 by from Great product Great product
Date published: 2021-07-16
Rated 5 out of 5 by from Straight Edge Guide Works very well. Set up is critical to the accuracy. Going over the use of the cut guides "many times" will go a long way to ease of use.
Date published: 2021-07-05
Rated 5 out of 5 by from Hello, I am extremely pleased Hello, I am extremely pleased with this purchase (straight edge guide) which directed me to look more closer at your array of wood wooding tools and merchandise. In a short time, I have purchased two additional items and (again) I am very pleased with the quality, ease of use, and their functional design. These tools have improved my craftsmanship as well as add to my system for completion. They are the tools that make my projects work. Thank you! best wishes gam
Date published: 2021-07-01
Rated 5 out of 5 by from It's a very good tool to get and easy to... It's a very good tool to get and easy to use. I recommend this tool.
Date published: 2021-06-09
Rated 1 out of 5 by from Very Disappointing it is very disappointing form Kreg. Usually good quality but not this one. I purchased the 4FT version. This is the second unit. I returned the first one as the edges was not flush and the circular saw stuck when it gets the middle of the Guide where the two parts attached. The second unit has the same problem but in just one edge. Also, after pulling the handle to hold the Guide tightly on it place the opposite side where the spring is located moving side to side, and it prevent straight cut. I am really disappointed as I pay for something to help and improve my work quality, however, I have to spend a lot of time to find out what is wrong and every time go to the store that I have purchased and explain why I need to exchange the product. I really feel bad and have no time to go to the store again and explain what is wrong again. I think Kreg is missing a good quality control.
Date published: 2021-06-08
Rated 5 out of 5 by from Wish I Had Your Tools Wish I Had Your Tools 20 Years Ago There Great Ed
Date published: 2021-06-03
Rated 5 out of 5 by from This has been an excellent addition to my tool arsenal.... This has been an excellent addition to my tool arsenal. I have only a small amount of space at home and the Kreg Crosscut Station allows me to get most of the functionality of a miter saw with the circular saw I already have. The setup was easy and using it is too. I like the built in hold-downs too.
Date published: 2021-06-02
Rated 5 out of 5 by from My Project Am happy to get my instruments for my project from Kreg tool. Am currently looking to order a Docking Station. Will definitely submit the order sometimes this week.
Date published: 2021-06-01
  • y_2021, m_7, d_29, h_20
  • bvseo_bulk, prod_bvrr, vn_bulk_3.0.18
  • cp_1, bvpage1
  • co_hasreviews, tv_0, tr_84
  • loc_en_CA, sid_1001619505, prod, sort_[SortEntry(order=SUBMISSION_TIME, direction=DESCENDING)]
  • clientName_homedepot-canada
  • bvseo_sdk, java_sdk, bvseo-4.0.0
  • CLOUD, getReviews, 55ms
  • REVIEWS, PRODUCT

What is the maximum width for miter cuts?

What is the maximum width for miter cuts?
Asked by: Michael
Thanks for the questions. The Kreg Crosscut Station can cut up to 3 1/2" wide material at 45 degrees.
Answered by: Kreg Customer Service
Date published: 2021-07-12

can the circular saw be beveled while using this guide?

I'm new to this and I'm having trouble making an even beveled crosscut so the boards don't sit flush when I join them. it's frustrating and getting expensive. Can I set the blade to, for example, 20° while using this guide?
Asked by: Carlos
It probably would work, but I'd look for a different way to make your bevel cut. If you use this jig you will be cutting through and losing material from the front and back MDF fences and need to make new fences to replace them. Have you tried clamping a straight edge or board across the board you need to cut to act as a saw guide?
Answered by: JimM
Date published: 2021-06-15

you think I could use this to crosscut and anglecut vinal siding

I have made crosscut jigs before but the homeowner seem to like looking at a manufactured one.
Asked by: Otherguy
Thank you for your inquiry. You sure can if it is less than 1-1/2" thick and less than 12" wide.
Answered by: Kreg Customer Service
Date published: 2021-06-07

What is the maximum thickness of stock that can be cut?

What is the maximum thickness of stock that can be cut?
Asked by: Andrew
The top rails the saw slides on are the limiting factor here. I measured 1 5/8" between the bottom of the rail and the top of the sacrificial surface, so it should handle up to 2-by materials (like 2x4, 2x6, etc.)
Answered by: DaneE
Date published: 2021-06-02

Can I perform compound miters or cuts with this?

Asked by: RobM
No, this product is not intended for compound miters.
Answered by: esb
Date published: 2021-05-14

The setup and calibration process seems to mate a Crosscut Station to one circular saw. If I hav...

The setup and calibration process seems to mate a Crosscut Station to one circular saw. If I have another circular saw that is not the same size and shape as the first, do I need 2 of these stations? Another way to ask this question is, If buy another saw, can I reuse the station calibrated for the old saw, or I need to throw that out and get a new station?
Asked by: Eduardo
The crosscut station is adjustable for different sized saw bases. Also supports right or left hand saws. You may need to cut a new kerf line for the new saw.
Answered by: 4u1fisherman
Date published: 2021-07-15
  • y_2021, m_7, d_28, h_20CST
  • bvseo_bulk, prod_bvqa, vn_bulk_3.0.18
  • cp_1, bvpage1
  • co_hasquestionsanswers, tq_6
  • loc_en_CA, sid_1001619505, prod, sort_[SortEntry(order=LAST_APPROVED_ANSWER_SUBMISSION_TIME, direction=DESCENDING)]
  • clientName_homedepot-canada
  • bvseo_sdk, java_sdk, bvseo-4.0.0
  • CLOUD, getContent, 59ms
  • QUESTIONS, PRODUCT