Appliances Bath BBQs & Outdoor Cooking Blinds & Window Coverings Building Materials Cleaning Doors & Windows Electrical Floors & Area Rugs Hardware Heating & Cooling Kitchen Lawn & Garden Centre Lighting & Ceiling Fans Lumber & Composites Outdoor Living & Patio Outdoor Power Equipment Paint Plumbing Sheds & Outdoor Structures Storage & Organization Smart Home Tools Décor & Furniture All Departments Pro Savings Event Spring Outdoor Power Deals Event Halfway to Halloween
Pro Savings Event is on now. Don’t wait!  Shop Event

MAKITA 1-9/16-inch (11.0-Amp) Rotary Hammer, SDS-MAX with AVT

Model # HR4013C|Store SKU # 1000729309

MAKITA 1-9/16-inch (11.0-Amp) Rotary Hammer, SDS-MAX with AVT

Overview

Model # HR4013C Store SKU # 1000729309

The 1-9/16" AVT Rotary Hammer (model HR4013C) is engineered with enhanced Anti-Vibration Technology (AVT), a synchronized three-component system for significantly less vibration. The result of the enhanced AVT is a category-leading vibration rating of 5m/s². The powerful 11 AMP motor delivers 8.4 ft. lbs. (11.4 Joules) of impact energy, up to 500 RPM and 2,900 BPM with variable speed dial. Trigger and locking switches are included for convenient operation in short or prolonged demolition applications. For added safety, torque limiter stops bit rotation if bit jams and soft start feature gradually increases speed to eliminate start up shock. There are 24 angle bit positions enable chisels to be positioned at optimum angle of operation. It is ideal for a range of trades including masons, concrete contractors, demolition contractors, plumbers, electricians, sprinkler installers, city maintenance crews, and general contractors seeking a best-in-class rotary hammer.

  1. PERFORMANCE: Delivers up to 11.4 J (8.4 ft. lbs) of impact energy.
  1. VERSATILITY: 24 angle bit positions enable chisels to be positioned at optimum angle of operation. Variable speed dial allows operator to adjust speed based on materials or application
  1. CONVENIENCE: Incorporates both trigger and locking switches for ease of operation in intermittent drilling and prolonged demolition applications
  1. TECHNOLOGY: Advanced Anti-Vibration Technology (AVT) system incorporates vibration absorbing housing, active dynamic vibration absorber and damper spring to actively counteract the vibration of the tool for greatly reduced transmission to the operator
  1. SAFETY: Soft start feature gradually increases speed to eliminate start up shock. Torque limiter stops bit rotation if bit jams for increased operator safety and tool protection
  1. One-touch sliding chuck for easy bit installation and removal
  1. LED power light indicates active power supply and LED service light indicates appropriate time to change carbon brushes
  1. No load motor suppression limits vibration and bit deflection when idling
  1. Ergonomic soft rubber grip design for vibration absorption and comfortable operation
  1. INCLUDES: Straight Side Handle (123138-5), D-Style Side Handle (196792-8), Cleaning Cloth (443122-7), Depth Gauge (331955-1), Plastic Carrying Case (141977-1)

Manual

  1. Makita Canada_Warranty Statement-pdf.pdf
  2. Rotary_Hammer_HR4010C-pdf.pdf
  3. HR4013C-JAN2023-pdf.pdf
  4. HR4003C_HR4013C_HR5202C_HR5212C-EN,FR,SP(2019)-pdf.pdf

The Home Depot will provide an accessible format of PDFs upon request. Please contact us at
1-800-628-0525.

Specifications

Chuck Type

SDS-Max

Power Tool Features

Variable Speed, Side Handle, Bits/Blades Included, Depth Gauge, Case Included, LED Light

Cordless/Corded

Corded

Battery Power Type

Corded

Amps

11

Number of Batteries Included

0

Dimensions

Assembled Depth (in inches)
6.0
Assembled Height (in inches)
18.0
Assembled Weight (in lbs)
14.8
Assembled Width (in inches)
22.0
Packaged Depth (in inches)
22.24
Packaged Height (in inches)
6.77
Packaged Weight (In lbs)
27.12
Packaged Width (in inches)
17.72

Details

Amps
11
Batteries Included
No
Battery Amp Hours
0
Battery Platform
No Battery
Battery Power Type
Corded
Battery Voltage
No Battery Voltage
Chuck Size (in.)
1-9/16 in.
Chuck Type
SDS-Max
Cordless/Corded
Corded
Handheld or Stationary
Handheld
Laser Guide
No
Maximum Speed (RPM)
480
Motor
Brushed
Number of Batteries Included
0
Power Tool Features
Variable Speed, Side Handle, Bits/Blades Included, Depth Gauge, Case Included, LED Light
Power Tool Type
Rotary Drills
Shank Type
SDS-Max
Variable Speed

Warranty / Certifications

1 year manufacture warranty + 3Year service warranty total value $150 for 3year period Valid only at Makita Factory service centers
Related Searches
makita 1-9/16 inch rotary hammer
dewalt 1 1/8 inch rotary hammer
corded rotary hammer
1 inch rotary hammer
rotary hammer
hilti quick change rotary hammer
makita 7/8 inch rotary hammer
makita cordless rotary hammer

Related Products

Milwaukee Tool M18 FUEL 18V 1-3/4-inch SDS Max Rotary Hammer w/ ONE KEY (Tool-Only)

Our M18 FUEL 1-3/4" SDS Max Rotary Hammer w/ ONE-KEY delivers best-in-class performance, equipping users with productivity and control in demanding applications. The POWERSTATE Brushless Motor and REDLINK PLUS Intelligence deliver 11 ft-lbs of impact energy, resulting in the hardest-hitting and fastest drilling SDS Max Hammer in its class. This rotary hammer provides maximum control and an enhanced feature set, including AUTOSTOP Enhanced Kickback Control to prevent over-rotation in a bind-up and AVS Anti-Vibration System to reduce user fatigue. Equipped with VACLINK, an integrated wireless dust control technology, allows compatible tools and dust extractors or vacuums to connect to each other, providing users the ability to activate the dust extractor or vacuum directly from the tool.

Our M18 FUEL 1-3/4" SDS Max Rotary Hammer w/ ONE-KEY delivers best-in-class performance, equipping users with productivity and control in demanding applications. The POWERSTATE Brushless Motor and REDLINK PLUS Intelligence deliver 11 ft-lbs of impact energy, resulting in the hardest-hitting and fastest drilling SDS Max Hammer in its class. This rotary hammer provides maximum control and an enhanced feature set, including AUTOSTOP Enhanced Kickback Control to prevent over-rotation in a bind-up and AVS Anti-Vibration System to reduce user fatigue. Equipped with VACLINK, an integrated wireless dust control technology, allows compatible tools and dust extractors or vacuums to connect to each other, providing users the ability to activate the dust extractor or vacuum directly from the tool.
View Details

MAKITA 40Vmax XGT Brushless Cordless 1-1/8-Inch Rotary Hammer with AVT & AFT (Tool Only)

The 40V max XGT Brushless Cordless 1-1/8-Inch Rotary Hammer Kit (HR007GZ) is a cordless concrete solution engineered for heavy-load applications. It delivers the power, speed, and run-time for corded demands, and features a convenient D-handle design that is ideal for overhead, downward or hard-to-reach horizontal drilling/chipping applications. The Makita-built brushless motor delivers a full 2.7 ft. lbs. of impact energy, with 0-980 RPM and 0-5,000 BPM. Constant speed control automatically applies additional power under load for optimum performance. It's equipped with Active Feedback-Sensing Technology (AFT), which electronically turns off the motor if rotation of bit is suddenly forced to stop, and Anti-Vibration Technology (AVT) for reduced vibration. More than just a padded handle, AVT is an internal counterbalance that uses air pressure to move counterweight pistons in the opposite direction of the drive piston to actively reduce vibration

The 40V max XGT Brushless Cordless 1-1/8-Inch Rotary Hammer Kit (HR007GZ) is a cordless concrete solution engineered for heavy-load applications. It delivers the power, speed, and run-time for corded demands, and features a convenient D-handle design that is ideal for overhead, downward or hard-to-reach horizontal drilling/chipping applications. The Makita-built brushless motor delivers a full 2.7 ft. lbs. of impact energy, with 0-980 RPM and 0-5,000 BPM. Constant speed control automatically applies additional power under load for optimum performance. It's equipped with Active Feedback-Sensing Technology (AFT), which electronically turns off the motor if rotation of bit is suddenly forced to stop, and Anti-Vibration Technology (AVT) for reduced vibration. More than just a padded handle, AVT is an internal counterbalance that uses air pressure to move counterweight pistons in the opposite direction of the drive piston to actively reduce vibration
View Details

MAKITA 36V(18Vx2) LXT Brushless 1-9/16 inch Rotary Hammer w/Case (Tool Only)

AWS (Auto-Start Wireless System) uses Bluetooth technology to communicate between tool and vacuum and enable wireless control when used with Makita AWS cordless tools, Advanced Anti-Vibration Technology (AVTTM) system incorporates vibration absorbing housing, active dynamic vibration absorber and damper spring to actively counteract the vibration of the tool for greatly reduced transmission to the operator, eXtreme Protection Technology (XPT) offers maximum protection against dust, debris and liquids for optimal performance in extreme conditions.

AWS (Auto-Start Wireless System) uses Bluetooth technology to communicate between tool and vacuum and enable wireless control when used with Makita AWS cordless tools, Advanced Anti-Vibration Technology (AVTTM) system incorporates vibration absorbing housing, active dynamic vibration absorber and damper spring to actively counteract the vibration of the tool for greatly reduced transmission to the operator, eXtreme Protection Technology (XPT) offers maximum protection against dust, debris and liquids for optimal performance in extreme conditions.
View Details

Bosch 18V EC Brushless SDS-plus Bulldog 1 inch Rotary Hammer

This Bosch D-handle Bulldog hammer consistently outperforms the best-selling 1 In. corded 11255VSR Bulldog, making it better than the best. The GBH18V-26D 18V EC Brushless 1 In. SDS-plus Bulldog Rotary Hammer delivers 1.9 Ft.-Lbs. of impact energy, based on the industry standard of measurement agreed upon by the European Power Tool Association (EPTA). It weighs only 5.8 Lbs. (tool only, not including battery), delivering superior performance and an outstanding impact-to-weight ratio. The EC Brushless motor maximizes battery runtime for extended performance. The tool features a jobsite-proven D-handle design with soft-grip and is ideal for both overhead, horizontal and downward drilling applications. It also has KickBack Control, an integrated sensor to stop tool rotation in bind-up situations. The hammer features a variable-speed reversing trigger for accurate bit starting.

This Bosch D-handle Bulldog hammer consistently outperforms the best-selling 1 In. corded 11255VSR Bulldog, making it better than the best. The GBH18V-26D 18V EC Brushless 1 In. SDS-plus Bulldog Rotary Hammer delivers 1.9 Ft.-Lbs. of impact energy, based on the industry standard of measurement agreed upon by the European Power Tool Association (EPTA). It weighs only 5.8 Lbs. (tool only, not including battery), delivering superior performance and an outstanding impact-to-weight ratio. The EC Brushless motor maximizes battery runtime for extended performance. The tool features a jobsite-proven D-handle design with soft-grip and is ideal for both overhead, horizontal and downward drilling applications. It also has KickBack Control, an integrated sensor to stop tool rotation in bind-up situations. The hammer features a variable-speed reversing trigger for accurate bit starting.
View Details
1-9/16-inch (11.0-Amp) Rotary Hammer, SDS-MAX with AVTMAKITA 1-9/16-inch (11.0-Amp) Rotary Hammer, SDS-MAX with AVTThe 1-9/16" AVT Rotary Hammer (model HR4013C) is engineered with enhanced Anti-Vibration Technology (AVT), a synchronized three-component system for significantly less vibration. The result of the enhanced AVT is a category-leading vibration rating of 5m/s². The powerful 11 AMP motor delivers 8.4 ft. lbs. (11.4 Joules) of impact energy, up to 500 RPM and 2,900 BPM with variable speed dial. Trigger and locking switches are included for convenient operation in short or prolonged demolition applications. For added safety, torque limiter stops bit rotation if bit jams and soft start feature gradually increases speed to eliminate start up shock. There are 24 angle bit positions enable chisels to be positioned at optimum angle of operation. It is ideal for a range of trades including masons, concrete contractors, demolition contractors, plumbers, electricians, sprinkler installers, city maintenance crews, and general contractors seeking a best-in-class rotary hammer.
MAKITA
1000729309
CAD9992026-04-16
The Home Depot Canada
4.866745