Maintaining clean, safe stores is one of our top priorities. Learn More

MAKITA 5/8-inch Hammer Drill

MAKITA 5/8-inch Hammer Drill

Model # HP1631K|Store SKU # 1000662409

Overview

Model # HP1631K Store SKU # 1000662409

Makita's 5/8-inch hammer drill is suitable for all drilling uses. It features durable aluminum gear housing and ergonomic soft grip design for vibration absorption and comfortable operation.

Industrial Aluminum gear housing for durability and long tool life

Cylinder-shaped motor housing

1/2-inch keyless chuck will handle 5/8-inch concrete bit with 1/2-inch shank

360° swivel side handle

360 Degree swivel side handle

Manual

You will need Adobe Acrobat Reader to view PDF documents.

Specifications

Dimensions

Assembled Depth (in inches): 6
Assembled Height (in inches): 12
Assembled Weight (in lbs): 3.8
Assembled Width (in inches): 12
Packaged Depth (in inches): 11.65
Packaged Height (in inches): 8.03
Packaged Weight (In lbs): 8.38
Packaged Width (in inches): 2.95

Details

Amps: 6.2
Batteries Included: No
Battery Amp Hours: 1
Battery Power Type: Hardwired
Certified: Yes
Chuck Type: Keyless
Cordless/Corded: Corded
Country of Origin: CN-China
Handheld or Stationary: Handheld
Laser Guide: No
Maximum Speed (RPM): 3200
Motor: Brushed
Number of Batteries Included: 1
Number of Speeds: 1
Power Tool Features: LED Light, Side Handle, Keyless Chuck
Power Tool Type: Hammer Drills
Variable Speed: Yes
Voltage (volts): 110

Warranty / Certifications

1 year warranty. For more details on this warranty, please call 1-800-263-3734.

5/8-inch Hammer Drill

MAKITA 5/8-inch Hammer Drill

Makita's 5/8-inch hammer drill is suitable for all drilling uses. It features durable aluminum gear housing and ergonomic soft grip design for vibration absorption and comfortable operation.

MAKITA

1000662409

CAD124

The Home Depot Canada

5/8-inch Hammer Drill is rated 3.0 out of 5 by 14.

Rated 1 out of 5 by Holinder from Great drill with a poor chuck The chuck gave me endless grief. It has to be tight but then it would not release. Plastic outer shell broke when trying to release it in a vice. Very poor flimsy plastic chuck design. Resolved the problem by replacing the chuck with an all metal chuck that requires a key which is readily available from Makita as a spare part. Since replacing the chuck this has been a fabulous drill. It has far more power and torque than any battery drill. I have used it frequently for hammering 3/4 inch and 1 inch holes in concrete. Rating with original chuck is 1 star, rating with replacement keyed chuck is 5 star.

Date published: 2021-08-09

Rated 5 out of 5 by PatJeaurond from Makita 5/8 Electric Hammer Drill Great Hammer drill, perfect for at home work. Obviously much more torque then the battery operated hammer drills, making it so much quicker & easier to get holes in your concrete project. Also amazing for making those wire & water line holes in the joists

Date published: 2021-03-08

Rated 1 out of 5 by carpenter from Junk Chuck will not stay tight even with small bits in hammer mode, don't buy this drill.

Date published: 2020-12-30

Rated 1 out of 5 by SteveD from too fast with little hammer the drill is fast but hammer is unnoticeable, this causes your bits to burn/dull. returned and bought a more expensive one and its worth it.

Date published: 2019-02-18

Rated 1 out of 5 by Gibbs from Chuck Breaks As said by other reviewers, it seems like this chuck breaks easily. I have had this drill for under a year and the chuck has given out on it. It will still work if it's forced open/closed with pipe pliers, but it will jam up again not too soon. About three months later, the motor bearings went. If you're looking for a cheap hammer drill, I wouldn't recommend this one.

Date published: 2012-05-10

Rated 5 out of 5 by vanrenos from Feels solid It has good weight to it, had no issues drilling 5/8s holes. Awesome case with top drill bit and screw compartment. I noticed on most hammer drills you need to tighten the handle as you use it for first couple seconds. Also no depth gauge Good deal at 100 bucks

Date published: 2012-04-23

Rated 4 out of 5 by Maxim from I can't say anything bad about this hammer dril, It works fine for me. I would give five starts if the depth gauge was there.

Date published: 2011-08-26

Rated 1 out of 5 by SamJoi from Complete DISASTER!! Thanx for your review RodgePodge...I purchased this back in May 2011 and it didn't work at all...I had to enlist help from someone else to drill just 4 holes and he quickly ditched this drill and pulled out his own dewalt cordless. I'm a female and live in a condo that has several concrete walls and i've been scared to take on other projects on those walls because i'm now petrified of drilling into the concrete (and i consider myself quite handy!) everyone said it shouldn't be any more difficult than any other home project but this drill made me feel practically helpless! i'll try another project and dive in again!

Date published: 2011-06-17

5/8-inch Hammer Drill Reviews - page 2

What’s the difference between a 5/8 hammer drill and a 1/2 inch one? 

Asked by: Natey

1/8” in the chuck. The 5/8 drill will accept larger drill bits/accessories. 

Answered by: Tooly

Date published: 2020-11-06

no included depth stop?

I bought this drill and there's not included depth stop. Is this correct? Do you carry one, and how much is it?

Asked by: Anonymous

Mine did not include one either.

Answered by: Gibbs

Date published: 2020-05-03

In Store Availability / Power Rating

- How can I see online if this tool is available in store? - Nowhere in the specs does it give the power (Amps). How many Amps is it?

Asked by: Anonymous

You can tell whether an item is available in-store or online by looking at the bullet points for: Internet/Cat # or Store SKU #. The product is available online and in-store and the hammerdrill is 6.2 amps. I hope this helps.

Answered by: OnlineAssociate

Date published: 2016-02-13