Malibu Wide Plank French Oak Oceanside 1/2-inch x 7-1/2-inch x Varying Length Eng. Hardwood Flooring (23.31 sq.ft./case)

Model # HDMPTG964EF|Store SKU # 1001341791

Choose Your Options

Case/Pallet: Case

Get it Installed

Start with a precise in-home Wood Flooring measurement and get a detailed installation quote, including materials and labour.

Overview

Model # HDMPTG964EF Store SKU # 1001341791

It's time to take hardwood quality further! Malibu Wide Plank presents gorgeous French Oak in wider and longer planks. Unlike rotary peeled veneer, sliced face offers straight wood grains and gives you a premium solid wood look. Hand rolled edges and ends complete an unprecedented allure. Choose from 6 trend-setting shades from whitewash to earthy grays to brownsall sealed with 6 layers of the latest super low gloss urethane finish, providing protection from everyday wear. A minimum of 50% of planks in each case will be full 74.8-inch lengths. Surface texture features a beautiful elegant wire brushing. Backed by a lifetime residential warranty, Malibu Wide Plank is Lacey Act compliant, EPA and CARB 2 certified for your safety, it has also achieved the highly coveted Floor Score certification which is the most recognized indoor air quality (IAQ) certification standard for hard surface flooring materials. Malibu Wide Plankhere to expand design possibilities.

Wood Species: French Oak

1/2 in. Thickness x 7-1/2 in. Width x 15 in. to 74.8 in. Random Length Planks

Hardwood trim and moldings: item coordinates with 1/2 in. thick hardwood flooring

23.31 sq. ft. per case and case weight: 40.12 lbs.

Construction: 7 ply cross grain Engineered Hardwood flooring

Pre-finished, Ultra-Low-Gloss urethane finish with aluminum oxide, Elegantly Wire Brushed

Manual

The Home Depot will provide an accessible format of PDFs upon request. Please contact us at
1-800-628-0525.

Specifications

Dimensions

Assembled Depth (in inches): 74.8
Assembled Height (in inches): 0.5
Assembled Weight (in lbs): 6
Assembled Width (in inches): 7.5
Packaged Depth (in inches): 75.71
Packaged Height (in inches): 3.15
Packaged Weight (In lbs): 40.12
Packaged Width (in inches): 7.99

Details

Case/Pallet: Case
Country of Origin: MY-Malaysia
Edge Type: Bevel
Finish Type: Matte
Gloss Level: Matte
Gloss Level (%): Matte 15 - 25%
Hardness Rating (JANKA): High (Above 1240)
Installation Location: Above Grade/Wood Subfloor
Installation Method: Tongue and Groove
Installation Method: Glue Down
Plank Width (inches): 6 or Greater
Surface Texture: Wirebrushed
Wood Colour: Grey
Wood Plank Width (Inches): Wide (5+)
Wood Species: French Oak

Warranty / Certifications

How does the French Oak Rincon wear with medium size dogs (30 lbs) dogs? Do they scratch?

Asked by: Cathfloor

The entire collection of Malibu Wide Plank Hardwood Flooring is very durable, however If you look up the definition of Scratch resistant it essentially means that the product is able to withstand minor scratches. There are ways to prevent scratches on Hardwood Flooring by taking proper precautions to protect furniture and chair legs and feet with felt protectors. Moving heavy objects without a dolly and/or protective plywood beneath may cause damage to any type of flooring. Damage may also occur from spiked and/or high heels and pet claws. Falling objects can also dent or fracture any type of flooring. Scratching to any hard surface floor may occur if proper precautions are not taken, here are a few steps we suggest: Protect your floor when using a dolly for moving furniture or appliances. Never slide or roll heavy furniture or appliances across the floor. • Place protective pads beneath furniture legs and other heavy objects. • Minimize abrasive material and dirt by placing mats on both sides of exterior doors and by using area rugs in high traffic areas • Use protective mats beneath rolling chairs and keep furniture casters clean. • Keep pets’ nails trimmed. • Remove shoes with cleats, spikes or exceptionally pointy heels before walking on the floor

Answered by: MWP Product Expert

Date published: 2023-06-19

Can it be installed over a concrete floor with radiant heating?

Asked by: Eric

RADIANT HEAT: Yes, please follow the guidelines in the Installation Guide attached to each product listing page under Info & Guides. Radiant Heat Systems • The radiant heat system must have been tested and in operation for a few weeks prior to installation. • The radiant heating system needs to be turned off prior to installation and the floor needs to be close to room temperature 65 to 75 degrees. If the radiant heat pipes are visible or exposed in the subfloor, you must cover them with 3/8” plywood to spread heat more evenly. • After the flooring is installed, slowly raise the temperature to the preferred comfort level (over at least a 5 day timeframe) beginning two days after installation or at the onset of colder weather conditions. • The radiant heat system must be controlled and the surface temperature of the flooring must never be allowed to exceed 85°F. • Proper relative humidity must be maintained within your home at all times during the year. For best results and to minimize seasonal gaps keep indoor humidity between 30% to 50% RH. If you are in an arid part of the USA or Canada, it is especially imperative that you use a humidifying system to maintain this moisture in the air. • Forced air heating system also can dry out the air inside your house much more than you might imagine, so use of a Relative Humidity meter(Hygrometer) is recommended to ensure you know when you must use a humidifier to keep the relative humidity above 30%. • Even when these guidelines are followed it is still possible that your flooring may experience some cracks (seasonal checking) on the plank surface and/or gapping between planks due to slight shrinkage, which are not covered by the products limited warranty.

Answered by: MWP Product Expert

Date published: 2021-08-05

We plan to install our French Oak Mavericks over an existing hardwood floor from when the house was built. Should we be placing a subfloor over the existing? If so are there any specific recommendations on the type of subfloor?

Asked by: Ryan

This Engineered 1/2" & 9/16” Tongue & Groove Collection can be full spread glue down, staple, nail down or floating application. Please refer to the "Installation Guide" located as a PDF file attached to each Product listing page under "Info & Guides". WOOD/CONCRETE SUBFLOOR REQUIREMENTS: Approved Wood subfloors Note that joist spacing determines minimum subfloor thickness. • Joist spacing 16” on center (OC) Plywood: Minimum of (5/8 ̋) Oriented Strand Board (OSB): Minimum (3/4 ̋, 23/32”). • Joist spacing 16” up to 19.2” (OC) Plywood: Minimum of (3/4 ̋, 23/32”) Oriented Strand Board (OSB): Minimum of (3/4 ̋, 23/32”). • Joist spacing over 19.2”up to maximum 24” (OC) Plywood: Minimum of (7/8”) Oriented Strand Board (OSB): Minimum of (1”). • Do not install flooring directly over floor joist without subflooring. All structural panels/underlayment must be installed sealed-side down, and provide minimum 3&frasl;4” perimeter spacing. Square-edged or non-tongue and grooved panels used as a subfloor will require a minimum 1/8 ̋ (3 mm) expansion space placed between all plywood seams. Panels must meet minimum CDX grade Exposure 1 and US Voluntary Product Standard PS1-95,PS2-04 or Canadian performance standard CAN/CSA0325-0-92 for construction sheathing. Check panel for codes. • Pressure-treated plywood may have elevated moisture or latent with rot resistant chemicals, not for interior use. • Solid-board subflooring should be 3&frasl;4” x 5 1/2” (1” x 6” nominal), Group 1 dense softwoods, No. 2 Common, kiln-dried to less than 12%percentmoisturecontent.Addmin.3/8”plywoodoversolidboardsubfloors. • Particleboard, Luan or Masonite is approved for floating installations only and must be covered with a minimum of 3/8 ̋CDX plywood whengluingthisproducttothesubfloor.  Do not install over existing plywood subfloors that are directly installed over concrete without proper moisture protection between the plywood and the concrete.  Nail wood flooring perpendicular to the floor joist.  Nailing wood flooring parallel to the floor joist is an option using a combination of plywood, OSB, Advantech or similar approved subfloors. Floor joist (16” to 19.2 oc) The total subfloor thickness minimum must be 1-1/4”. Floor joist greater than (19.2 up to 24”oc) The total subfloor thickness minimum must be 1-7/16”. For immediate assistance and troubleshooting please call our Home Depot Technical Services department @ 800-928-6168.

Answered by: MWP Product Expert

Date published: 2022-05-27

I notice the installation calls for glue down. Can this be nailed down instead? Will nailing down void the warranty?

Asked by: rosie

This Engineered 1/2" Tongue & Groove Collection can be full spread glue down, staple or nail down. Please refer to the detailed "Installation Guide" located as a PDF file attached to each Product listing page under "Info & Guides".

Answered by: BRAND_ANSWERS_MalibuWidePlank

Date published: 2020-06-15