Model # MB-025-0514|Store SKU # 1001670637
The versatile 1/16 In. (1.6 mm) diameter Engraving bit is made of high-grade steel for use on wood, plastic, leather, soft metals & rubber. For use with all Dremel high-speed rotary tools, the accessories work well for detailed material removal in applications like shaping, carving, engraving, hollowing, grooving, slotting, inlaying, making tapered holes, or freehand routing. The cylinder shape of the Engraving bit allows for deep removal of material, cuts flat areas, round edges and makes stop cuts and V-cuts. The accessory tip makes flat bottom slots and grooves, flat side cuts, and makes V-cuts when held at 45-degrees.
The MILWAUKEE SDS-Plus Rebar Cutters are the toughest in rebar, delivering up to 3x life compared to competitive rebar cutters. Designed with precision ground carbide, these drill bits shred through rebar providing up to 10x faster drilling speeds vs. 4-cutter drill bits. Milwaukee SDS Plus Rebar Cutters are equipped with HAMMER GUARD protective shanks, preventing carbide teeth destruction from accidental use in rotary hammer mode, saving time and money. Deep debris channels provide the fastest rebar shard removal while double ejection slots allow for easy rebar slug removal. Available in sizes 3/8 1-1/2, Milwaukee SDS Plus Rebar Cutters are the optimal solution for drilling embedded rebar for corded and cordless SDS-Plus rotary hammers.
The 1-1/8 in. Carbide Hole Cutter is ideal for cutting 3/4 in. conduit and pipe. It features a split-point pilot drill bit to reduce walking. An integrated flange helps prevent drilling beyond the sheet metal.
"Whether youre looking to carve, engrave, cut, sand or grind, there is a Dremel accessory to get the job done with pinpoint precision.Dremel accessories are also color-coded into usage categories to make it easier for you to select the right accessory for your project. The versatile 3/8 In. (9.5mm) diameter Carving Bit is made of high-grade steel for use on wood, plastic and soft metals. For use with all Dremel high-speed rotary tools, these high-speed cutters work well for detailed material removal in applications like shaping, carving, engraving, hollowing, precision cutting, grooving, slotting, inlaying, making tapered holes or freehand routing. The Disc shape of the carving bit is ideal for making channel cuts while the accessory tip allows for side cuts. Compatible with all Dremel corded and cordless rotary tools. Theres no need to hunt for the right collet, all Dremel rotary accessories feature a 1/8 standard shank."
The MATCHFIT Dovetail Router Bit is optimized for use with MATCHFIT Dovetail Clamps and hardware, delivering precise, clean grooves with minimal sanding. Its 14°, ½” profile features custom rounded corners: a 1/32” bottom round over strengthens joints, while a 1/16” top round over reduces tear-out and offers a depth tolerance of .365"–.385". The 8° down shear design improves chip removal, lowers friction, and ensures smoother, cooler cuts. A laser-etched ⅜” depth line makes setup fast and accurate. The wide base reduces vibration and noise, and the extended shank with a visible safety line ensures a secure fit in most routers. Built for durability, safety, and flawless performance in hardwood, softwood, and plywood.
