Multinautic Aluminum Kayak Rack Kit for Dock Posts up to 2-inch Outer Diametre

Model # 22018|Store SKU # 1001592769

Overview

Model # 22018 Store SKU # 1001592769

To ensure that your kayaks last over time and are always ready for use, Multinautic has designed these sleek aluminum hooks to be installed on your dock. Simply slide them onto posts of up to 2-inches outer diametre and tighten the 4 pressure bolts. Keeps your kayak readily at hand, yet not in the way. Easily fits over posts with a simple few minutes installation. Just place over the posts and tighten the screws. Designed to fit posts of up to 2 inches outer diametre.

Includes aluminum J-shaped hooks with plastic protection end caps and 4 stainless steel set screws

No assembly required. These supports are welded to sturdy aluminum clamps that slide easily over posts with an outside diametre from 1 1/2" to 2"

Can be installed above the dock for easy access or facing outward suspended outside the dock to free up space

To be installed on a fixed dock whose piles are spaced with a span that will fit your kayak

Can be installed on floating docks with the addition of 2 short posts on the side or anywhere that you can install posts of the right diameter, such as on a sandy beach

Product Of Canada

Specifications

Product Type

Boat & Kayak Racks

Dimensions

Assembled Depth (in inches): 18.0
Assembled Height (in inches): 23.9
Assembled Weight (in lbs): 3.7
Assembled Width (in inches): 2.25
Packaged Depth (in inches): 2.25
Packaged Height (in inches): 18.1
Packaged Weight (In lbs): 4.64
Packaged Width (in inches): 23.9

Details

Certified: No
Product Type: Boat & Kayak Racks

Warranty / Certifications

This product is provided with a 1 year warranty.

Related Products

Flags Unlimited 6 ft. Spinning Flagpole Kit with Canadian Flag

Prevent your flag from wrapping around the pole with the Spinning Pole Kit. The spinning mechanism is built right into the pole and allows the flag to spin 360

View Details

Fox 40 Boat Essentials Kit

The Boat Essentials Kit is a basic kit for any personal watercraft, designed to help bring a boat, canoe or kayak up to minimum regulations. Contents include: waterproof screwtop bailer with lid, 50 Ft braided rope with float and a watertight LED flashlight

View Details

Multinautic Adjustable Frame Kit

Structural reinforcement for 2 in. x 6 in. Wood Frame or Stationary Dock. This Hot Dip Galvanized Steel Hardware Kit also allows the installation of steel posts up to 2 in. outside diameter.

View Details

Multinautic Anchor Chain Hooks Kit 2-Pack with 1/2-inch T-Bolts for Aluminum Docks

An aluminum floating dock layout absolutely requires an anchoring system at the end of the dock and at every 30 ft. of the floating section. It is the concrete anchoring blocks that will keep the docks in place under wave movements. This essential kit will prevent the dock from moving up and down, and laterally. Anchoring chain retainers are required on both end corners of the dock and in the 4 corners of the floating dock section where the boats are usually moored. This kit is designed for the QPF-500 dock system, but this system can be bolted to the underside of other models if they can be drilled to accommodate the 1/2" bolts.

View Details