Model # 42337|Store SKU # 1001490436
No matter what your project entails, you will have the benefit of a long-lasting, durable connection with this flare fitting. It is designed for higher pressure applications, and is commonly used for gasoline, grease, oil, water, vacuum and air lines, along with LP and natural gas. These fittings are manufactured to the highest standards, ensuring that as either a homeowners or contractor, you're making a superior choice for your project.
Durable lead-free brass is an excellent choice,with all tapered pipe threads manufactured to highest quality standards and tolerances.Lead-free brass is not more than a weighted average of 0.25% lead when used with respect to the wetted surfaces of pipes,pipe,plumbing fittings and fixtures.This pipe fitting is easy to use for both contractors and the do-it-yourselfer.
A burst water pipe in the dead of winter can be a huge inconvenience and completely replacing the insulation needed to prevent pipes in perimeter walls and crawlspaces from freezing can be cost-prohibitive. To keep your most vulnerable pipes from freezing, the simple and DIY-friendly solution is to install a PRO-Tect heating cable for pipes. This 120 V plug-in heating cable generates heat (7 watts per linear foot) which will keep your pipes from freezing in low temperatures. The integrated thermostat control, located between the non-heating lead cable and the heating wire itself, will ensure a consistent temperature while minimizing energy use. The thermostat turns the heating cable on when exposed to temperatures below 37.4°F (3°C). It will shut the heating cable off when the pipe has been heated to a temperature of approximately 50°F (10°C). The cable is covered by a 2-year warranty.
Your project will have the benefit of this unique compression fitting that comes already assembled with a captive sleeve, which puts even pressure on the tubing, ensuring a tight seal. It is an excellent choice for gasoline, grease, oil, water, vacuum and air lines, and can be installed quickly and efficiently by both homeowners and contractors alike. The strong, durable brass construction ensures that you're choosing a superior fitting for your project.
