Model # P682|Store SKU # 1001011204
Blueskin Butyl Flash is a self-adhered flashing consisting of a synthetic butyl compound which is integrally laminated to a white engineered polypropylene film surface. The flashing is specifically designed to be self-adhered to a prepared substrate.
Rust-Oleum LeakSeal 6 inch Universal Patching Fabric is a non-shrinking, non-rotting, vinyl coating, woven glass mesh. It can conform to irregular surfaces because of its high degree of flexibility.
Bakor Blueskin Weather Barrier is a self-adhered membrane consisting of an SBS rubberized asphalt compound, integrally laminated to a blue cross-laminated polyethylene film. This membrane is specially formulated for self-adhesion to a prepared substrate. Bakor Blueskin Weather Barrier is designed for use as a concealed self-adhered barrier against moisture or air infiltration and is commonly used to provide a weather tight seal around windows and doors, joints in sheathings, sealing around skylights and as a flashing in residential construction.
Prime the substrate with ELASTOCOL STICK or EXTERIOR PRIMER. Position the membrane parallel to the lower edge of the roof. Fold the sheet, to half of its width, or 50 cm (20 in) over the whole length already positioned. It is recommended to kneel on the unfolded portion of the membrane to keep it in place during this operation. Remove the protective film from the folded section while placing the membrane on the support. The pressure-sensitive portion will then adhere to the support. Then take the other side of the membrane and repeat the previous two steps. Immediately apply pressure on the membrane using a heavy metal roller or hard rubber roller to ensure adhesion between the support and the membrane and avoid forming bulges, folds or gaps. Use non granulated side portion of the membrane to ensure a good overlap of about 10 cm (4 in) from each edge. The overlap must be positioned on the upper side of the slope.
Molded Pipe Flashing accessory to fit Onduvilla shingles and cannot be used with Ondura corrugated asphalt sheets. The flashing can be cut by the customer to allow customizing the flashing to fit various sizes of vent pipes. This item can be used with a standard universal boot found in most plumbing departments.
