Paulin Box Framing Phosphate Nails are recommended for thinner wood materials such as 3/4 inch thick lumber and exterior trim. Box nails have a thinner smooth shank than Common Nails therefore not ideal for structural projects. Phosphate coated for improved holding power, reduced friction during installation and increased corrosion protection. Not recommended for treated lumber.

Length: Imperial 1-1/2 inch

Nail Conversion: 4d

Material & Finish: Steel, Phosphate

Phosphate coated for improved holding power

Not recommended for treated lumber, interior applications

Nail Gauge: 14

Specifications

Dimensions

Packaged Depth (in inches): 1.77
Packaged Height (in inches): 4.53
Packaged Weight (In lbs): 0.926
Packaged Width (in inches): 3.15

Details

Collated: No
Country of Origin: O-Other
Finish: Metallic
Head Type: Flat
Interior/Exterior: Interior
Length (in.): 1.5
Package Quantity: 340
Product Finish/Material: Phosphate
Product Length: 1-1/2 in.
Product Weight: 420 g
Shank Type: Smooth
Size: 4D

Warranty / Certifications

Related Products

Paulin 1-1/4-inch Roofing Nails Electro Galvanized - 420g (approx. 188 pcs. per package)

Paulin Roofing Electro Galvanized Nails are large flat thin head nails with a short body. They are used for attaching asphalt, fibreglass shingles or sheet metal to wood. Shanks are smooth or ringed for increased pull-out strength. When installing roofing nails be sure to flush to the shingles. Avoid countersinking roofing nails as this can cause shingles to tear. Thin coating of Electro Galvanized zinc prevents rusting and withstands occaisonal moisture; however, it is less robust than Hot Galvanized and should not be exposed to weather if used correctly. Not suitable for exterior applications.

View Details

Paulin 1-1/2-inch (4d) Spiral Finishing Nails Hot Galvanized - 420g (approx. 403 pcs. per package)

Paulin Spiral Finishing Nails provide superior holding power in hardwood and dense materials: common for general construction projects. Pull-out and vibration resistant with a hot galvanized finish recommended for exterior applications where corrosion resitance is required. Ideal for pressure-treated lumber. The small finishing heads are usually sunken into the surface leaving a small hole which can be filled or painted for a concealed finish.

View Details

DEWALT 16-Gauge 2-1/2-inch Plastic Collated Straight Finish Nails (2500 per Box)

16-Gauge Straight Finish Nails to complete fastening tasks in finishing applications. These steel nails feature a bright finish which is glued collated. The convenient 2500-piece pack allows you to always keep your nailer loaded.

View Details

DEWALT 15-Gauge 1-1/2-inch Glue Collated Angled Bright Finish Nails (1,000 per Box)

15 gauge "FN" style angled finish nails have a coated finish with a chisel point. They apply to fine woodworking, finish, and trim applications. Recommended for use with Bostitch tools GFN1564K, N59FN, N60FN, and N62FN.

View Details