Model # 222-871|Store SKU # 1000155863
OZCO Timber Bolts combines the beauty of the OZCO Hex Cap Nut and Timber Screw with the strength of a through-bolted connection. These bolts are engineered to replace standard thread-all, carriage or other similar through bolt arrangement. This bolt features our patent-pending "inside - out" compression technology. When tightening conventional through bolts the more the fastener compresses the material the more the fastener is exposed. The exposed threads can create a safety concern or visual distraction that is often unacceptable. Cutting the excess fastener is often the only solution which also causes issues with rust, sharp edges and compromised corrosion resistance. OZCO Bolts are currently offered in 4 sizes that together will connect material from any size between 4 in. - 12 in. Choosing the correct size is easy because the take up of each product is 2 in. taking the guess work out of choosing the correct size.
Hex Bolts are used to fasten two or more parts together and allow for maintenance and repair disassembly. It is a common fastener in construction and machine assembly. It is best for general hardware use or where high strength is not required. The screw head is a hexagonal head designed to fit a ratchet or wrench
Lag Bolts are also called Lag Screws and are recommended for all types of wood or metal to wood construction where standard wood or deck screws are too short or light and where nails or spikes lack sufficient strength. They can be installed in wood with pre-drilled pilot holes or in masonry with Lag Shields. In wood to wood applications the non-threaded shank allows the second piece to be drawn tightly to the first piece of wood. Flat or fender washers are suggested to provide a larger bearing surface and to prevent the head of the lag bolt from imbedding in the first piece of wood. Stainless 18.8 Steel provides one of the highest degree of corrosion resistance when compared to a steel zinc finish. Ideal for outdoor projects such as decks, fences, wood structures and with treated lumber installations.
Joint Connector Bolts are designed to connect furniture or woodworking components at right angles or parallel. Ideal for all Knock-Down or Ready-to-Assemble Furniture. Used with Cap Nuts, Inserts, cross dowels or tee nuts. Low profile, large diameter, hex drive head. Brass plated is more economical than solid brass and is purely a decorative finish to match most hardware or wood used in Knock-Down or Ready-to-Assemble Furniture projects.
