Paulin 1/4-inch Fender Washer, Zinc-Plated, 100pcs

Model # 537-995|Store SKU # 1001632383

Overview

Model # 537-995 Store SKU # 1001632383

Paulin's Fender Washers are designed to be used under the head of a nut or bolt to distribute the forces applied when tightening. This washer has thinner body and an increased outer diameter and ideal for auto body repair, sheet metal work, plumbing and electrical applications. Zinc plating provides moderate corrosion resistance.

Application: For covering oversized holes or for use as spacers and levelers - Fender & body work. Also two washers can be bolted together and used for Heater Hose Hole plugs.

Bolt Size: 1/4 -Inch

Thickness: 1/16 -Inch

Application: Ideal for auto body repair, sheet metal work, plumbing, electrical

Increased outer diameter to disperse pressure

Prevents a nut, bolt or screw from pulling through the material

Material/Finish: Zinc-plated steel

Use with nuts and bolts of the same material and finish

Inside Diameter: 9/32"

Outside Diameter: 1-3/4"

Thickness: 1/16"

Manual

The Home Depot will provide an accessible format of PDFs upon request. Please contact us at
1-800-628-0525.

Specifications

Dimensions

Assembled Depth (in inches): 2.5
Assembled Height (in inches): 4.25
Assembled Weight (in lbs): 1.98
Assembled Width (in inches): 2.5
Packaged Depth (in inches): 2.5
Packaged Height (in inches): 4.25
Packaged Weight (In lbs): 1.98
Packaged Width (in inches): 2.5

Details

Finish: Zinc Coated
Inside Diameter (In.): 0.25
Material: Steel, Zinc
Outside Diameter (In.): 0
Package Quantity: 100
Thickness (in.): 0.06
Type: Standard

Warranty / Certifications

For warranty inquiries, please call 1-800-268-4000

Related Products

Paulin 1/4-inch Steel S.A.E. Washers - Zinc Plated

S.A.E. Steel Washers are made from strip steel; have bright, smooth, flat surfaces; are highly polished and are free from burrs.

View Details

Paulin 1/4-inch Steel Spacer Washer

Commonly used on axles, and shafts to space between cotter pins, lock nuts, hitch pin clips and hitch pins or to take up slack between machinery parts. Minimizes wear due to slipping and vibration. Provides a tight fit.

View Details

Paulin 1/4-inch Countersunk Finishing Washer - 18.8 Stainless Steel

Finishing Washers are also called a trim or cup washers. They are used in all types of trim work with flat or oval head screws. The cupped design gives a clean finished appearance and dress up any project. Use stainless steel where corrorsion is and rust is of concern or in exterior applications. Best for general hardware use or where high strength is not required.

View Details

Paulin 5/16 ID - 1-1/4 OD-inch Rubber Washer (1/16-inchThick)

Rubber washers are small flat rubber rings used on fasteners and in mechanical devices. These are great for use in light sealing applications and protecting surfaces from scratches. As clamping force is applied, rubber washers are compressed to conform to irregular surfaces. Also used to prevent vibration from spreading from one part to another, reducing the noise levels and ideal as gaskets or sealants where liquids or gases are present.

View Details