Milwaukee Days is on now. Don't wait!  Shop Event

Overview

Model # 8041 Store SKU # 1001043373

Protect your home from water damage with Peak aluminum gutter, soffit and fascia products. Featuring precision design, our products can help prevent water and moisture damage to the roof, windows, walls and foundation. Made from heavy-gauge aluminum, our products are attractive, reliable and maintenance-free. They won't rust or leak, which is ideal for keeping the exterior of your home looking pristine for many years. Our products are strong and attractive, but what makes them so unique? Every component is finished with exterior polyester paint on the outside and inside to give you a product that is durable and looks great from any angle. Plus, our gutter hanger is engineered to enable quick, safe, one-handed installation! For extra protection, add the Peak Aluminum Gutter Guard to your system to keep leaves and anything as thin as pine needles out! Connect the Aluminum Downspout to your gutter system to guide rainwater along the wall.

  1. Fits 3-inch square elbows
  1. Made from heavy-gauge aluminum for increased strength and durability
  1. Finished with polyester paint on both sides of the downspout
  1. Easy to clean, maintenance-free beauty that adds value to your home
  1. Attach the downspout securely to the wall using our downspout straps (available separately)
  1. More environmentally friendly than PVC alternatives
  1. Install the Peak Aluminum Gutter Guard to keep leaves, debris, and pine needles from clogging your gutter system
  1. Made in Canada

Specifications

Dimensions

Assembled Depth (in inches)
120
Assembled Height (in inches)
3
Assembled Weight (in lbs)
2.6
Assembled Width (in inches)
3
Packaged Depth (in inches)
120
Packaged Height (in inches)
3
Packaged Weight (In lbs)
2.6
Packaged Width (in inches)
3

Details

Country of Origin
CA-Canada

Warranty / Certifications

For more information, please contact Peak Products customer service at 1-877-883-7325
10 ft. L x 3-inch W x 3-inch H Aluminum Square Gutter (Eavestrough) Downspout in BrownPeak 10 ft. L x 3-inch W x 3-inch H Aluminum Square Gutter (Eavestrough) Downspout in BrownProtect your home from water damage with Peak aluminum gutter, soffit and fascia products. Featuring precision design, our products can help prevent water and moisture damage to the roof, windows, walls and foundation. Made from heavy-gauge aluminum, our products are attractive, reliable and maintenance-free. They won't rust or leak, which is ideal for keeping the exterior of your home looking pristine for many years. Our products are strong and attractive, but what makes them so unique? Every component is finished with exterior polyester paint on the outside and inside to give you a product that is durable and looks great from any angle. Plus, our gutter hanger is engineered to enable quick, safe, one-handed installation! For extra protection, add the Peak Aluminum Gutter Guard to your system to keep leaves and anything as thin as pine needles out! Connect the Aluminum Downspout to your gutter system to guide rainwater along the wall.
Peak
1001043373
10 ft. L x 3-inch W x 3-inch H Aluminum Square Gutter (Eavestrough) Downspout in Brown is rated 4.4 out of 5 by 398.
  • y_2024, m_7, d_12, h_7
  • bvseo_bulk, prod_bvrr, vn_bulk_3.0.42
  • cp_1, bvpage1
  • co_hasreviews, tv_273, tr_125
  • loc_en_CA, sid_1001043373, prod, sort_[SortEntry(order=RELEVANCE, direction=DESCENDING)]
  • clientName_homedepot-canada
  • bvseo_sdk, java_sdk, bvseo-4.0.0
  • CLOUD, getAggregateRating, 45ms
  • REVIEWS, PRODUCT
Rated 3 out of 5 by from Leaves & Debris ON gutter rather than IN gutter. I installed this kit around the back of my house where we have heavy leaf and tree debris. Usually, it takes a good hour of power washing to clean out my gutters each fall. This kit reduced my cleaning time down to about 10 minutes using only a leaf blower. Don't be misled – debris will still pile up on the gutter guard due to its design, just not *in* the gutter. I would have preferred a completely flat-surfaced design so the debris just blows off, but this kit was the only thing that fit my particular eaves roughing. To be fair, the retaining lip in the design that prevents debris from just blowing away, also prevents rain from washing right off the edge of the house.
Date published: 2021-11-19
Rated 4 out of 5 by from Did the trick I bought four of these as my house has a flat roof and the drains had no strainers of any kind. Most of the trees in my area have small leaves so I was concerned that the gap between the grating was too big. To supplement these I bought a small amount of screen door mesh and wrapped a piece around each strainer and then installed the ring. This worked great and allows water to still drain but nothing else to enter the drain. The included rings were slightly larger than my drains so because they are thin gauge aluminum I simply used a pair of scissor to make a cut from top to bottom. When I installed the rings into the drain the diameter could now be reduced and the ends just overlapped each other slightly.
Date published: 2017-04-07
Rated 4 out of 5 by from Nice gutter but use rivets! I followed Peaks instructions and ended up with a leaky gutter! The sections fit together poorly and when the joint hanger was screwed in gaps formed between the sections at the lap joints causing the thin layer of caulking to pull apart. I ended up assembling the entire gutter length (36') on the ground by caulking and clapping each lap joint and adding two aluminum rivets to the back (This Old House tip!) and one to the front near the top. I allowed 24 hours for the caulking to completely cure before moving the gutter.
Date published: 2016-09-15
Rated 5 out of 5 by from Peak Products 5" Aluminum Gutter Guard An incredibly ingenious design! An absolute snap to install especially for someone like me who is spatially challenged. The 4 ft. length makes it easy to handle - especially when you're up on a ladder or on the roof. Every length is a perfect fit and attached with only 3 self tapping metal screws. The Peak "Gutter Guard" is, in my opinion, the best gutter guard on the market. Superb construction, well priced and after 4 months of heavy rains, they work flawlessly.
Date published: 2013-03-04
Rated 5 out of 5 by from Great product but use some Philips screws Great product, better fit than the MHomes product. But I recommend you buy some SS Robertson pan heads so you can install one handed with the cordless drill. Phillips screws are a poor choice. But the actual gutter guard is great, good end to end recessed nested fit. Appreciated the pre-etched cardboard corner template. I would use again and recommend. I await to see how they do in winter and big storm events. But this locatoin is too high to clean from a ladder. I was able to install from the roof (using safety equipment)
Date published: 2013-10-08
Rated 3 out of 5 by from Ambivalent I decided to wait for a few months after installing before I commented. As previously mentioned by others, easy to install, fit into gutters nice and snugly, Canadian made, decent price point and really do work at keeping eaves troughs from plugging up. Unfortunately guards are stamped in such a way that when installed there is a sheltered 3/8 inch deep by approximately 2 1/2 inch wide "dead zone" the entire length of the trough. Pine needles in particular accumulate (pile?) in this dead zone restricting water from entering the gutter trough. So far I've taken the leaf blower out once a month to blow off the pine needles. If the top of the gutter guard were not "a dead zone" but were flat or convex, the prevailing breeze may have been able to blow some of the deterius away instead of me pulling out the leaf blower. I expected more from the product and wish I had researched other alternatives a little more thoroughly.
Date published: 2019-08-14
Rated 1 out of 5 by from Plastic too weak to stay in place It's been 2 years since I installed these around my garage to prevent leaves from clogging the eves. Since then the flimsy plastic mesh has collapsed and sunk into the eves troughs. The leaves still collect in the troughs on top of the mesh, but the mesh does seem to prevent the troughs from blocking the downspouts completely. At least for now... I anticipate as more leaves build up the weak mesh will collapse even more, with the result the downspouts will eventually clog totally again. I'm getting quotes for a proper aluminum eves trough filter system, which I should have done in the first place. Stay away from this product as it fails miserably...
Date published: 2023-05-24
Rated 1 out of 5 by from Cheap is the only thing going for it What a frustrating waste of time that was. The stems of the leaves drop through the giant mesh holes, trapping the leaves from blowing away, and the finer tree blossoms would get matted in the mesh. There's also not enough rigidity to hold them in place. They would collapse in some spots and pop out in others. All kinds of debris made it through these guards. Spent more time cleaning the mesh and refitting them than I would have just cleaning the gutters.
Date published: 2020-12-27
  • y_2024, m_7, d_12, h_7
  • bvseo_bulk, prod_bvrr, vn_bulk_3.0.42
  • cp_1, bvpage1
  • co_hasreviews, tv_273, tr_125
  • loc_en_CA, sid_1001043373, prod, sort_[SortEntry(order=RELEVANCE, direction=DESCENDING)]
  • clientName_homedepot-canada
  • bvseo_sdk, java_sdk, bvseo-4.0.0
  • CLOUD, getReviews, 15ms
  • REVIEWS, PRODUCT

Hi. I have a 42 foot length of gutter. If this fits under drip edge would the last half of the run be at a pretty severe slope and just drain the water over the side with a heavy downpour?

Asked by: Robin
Hi Robin, In our experience that is very rare. I wouldn’t be able to say for sure without seeing it in person as every house is different and it depends on the height of the gutter in relation to the height of the shingles. You could try installing just that one piece and then spray the roof above it with a hose and see how the gutter guard handles the heavy water flow. To be honest though you should be fine. I wouldn’t be concerned with it. Hope this helps!
Answered by: OntarioShines
Date published: 2023-08-31

Wouldn't leaves, dirt, moss, pine needles, branch debris etc. accumulate on top this mesh which would block many of the holes in the mesh causing rainwater overflow during heavy rain ?

Asked by: cantrin
Yes it will accumulate but does was and blow off. Had 5" for years and really no problem. Lots of pine needles leaves etc
Answered by: Shaddykins
Date published: 2021-10-01

How do you install the gutter guard with a metal roof? Can you post the installation manual?

Asked by: pinky
The gutters shouldn't interfere with your roof. These simply snap on the gutter, which is separate, and you pop a screw in to hold them there (use a drill to put the screw in)
Answered by: Ctaylor
Date published: 2020-06-03

Hi, I have an old gutter system which using nails. Some of the nails are broken so I need to replace them. Will this gutter hanger work for the old gutter system? Thanks.

Asked by: Jack
Hello Jack, and thanks for your question. This should be a great solution for you. You can see how these are installed on our web page at peakproducts.com. Good luck with your project, and don't hesitate to call if you have any additional questions at all. Thank you!
Answered by: Product Expert
Date published: 2021-09-17

Since these lay flat in the gutter creating a mini trough, it looks like debris will sit there eventually preventing water from getting in the gutter.  Other brands, like Easyon have a slope that looks like debris might slide off. Do either ot these clog?

Asked by: Roter
I have not had any clogging at all. In fact i checked last week because of the same concern that you are questioning, and i found no build-up of foreign materials/leaves etc. Mine were installed over a year ago.
Answered by: Anthony63
Date published: 2020-09-23

Will this product work if the roof has drip edge installed?

Asked by: Martin
Hi, Thank you for your question, The vendor have confirmed that Yes, gutter guard will work on a roof with an installed drip edge. Vendor have requested to get in touch with them at 1-877-883-7325 or by e-mail at cservice@peakproducts.com for further assistance.
Answered by: The Home Depot Canada
Date published: 2023-11-08

Can I use this as a soffit for my front porch which is 8x12ft with an attached turret porch extension?

Asked by: Allen
Hi Allen, Yes this would be perfectly feasible with this product, however as another member pointed out it would be best to use vented soffit to ensure ventilation is adequate. Thank you Allen.
Answered by: Product Expert
Date published: 2021-04-14

Is this item designed to fit under the drip edge 

Asked by: Billysw6
Yes it has helped. Only one thing i noticed was that whenever it snowed and melted, the melted snow was dripping all around the house which was not happening before we could fix the gutter guard. Can you please advise why it's happening - would appreciate.
Answered by: Benny
Date published: 2021-06-30
  • y_2024, m_7, d_11, h_5CST
  • bvseo_bulk, prod_bvqa, vn_bulk_3.0.42
  • cp_1, bvpage1
  • co_hasquestionsanswers, tq_79
  • loc_en_CA, sid_1001043373, prod, sort_[SortEntry(order=NUM_ANSWERS, direction=DESCENDING)]
  • clientName_homedepot-canada
  • bvseo_sdk, java_sdk, bvseo-4.0.0
  • CLOUD, getContent, 43ms
  • QUESTIONS, PRODUCT