Halloween 🎃 Holiday Decor ❄ Appliances BBQs & Outdoor Cooking Electrical Bath Blinds & Window Coverings Building Materials Cleaning Decking, Fencing & Gates Décor & Furniture Doors & Windows Kitchen Floors & Area Rugs Heating & Cooling Hardware Lighting & Ceiling Fans Lumber & Composites Outdoor Living & Patio Outdoor Power Equipment Paint Plumbing Storage & Organization Sheds & Outdoor Structures Smart Home Snow & Ice Removal Tools All Departments Pro Savings Event Dewalt MAX Power Event Refresh For Less
Pro Savings event is on now. Don't wait!  Shop Event

Peak 13 1/2-inch Aluminum Gutter (Eavestrough) Downspout Strap in White Pro Pack (100 Pieces)

Model # 3690|Store SKU # 1001796748

Peak 13 1/2-inch Aluminum Gutter (Eavestrough) Downspout Strap in White Pro Pack (100 Pieces)

Overview

Model # 3690 Store SKU # 1001796748

Use the 13 1/2-inch Aluminum Downspout Strap to fasten 3-inch x 3-inch downpipes securely to your wall. Protect your home from water damage with Peak aluminum gutter, soffit and fascia products. Featuring precision design, our products can help prevent water and moisture damage to the roof, windows, walls and foundation. Made from heavy-gauge aluminum, our products are attractive, reliable and maintenance-free. They won't rust or leak, which is ideal for keeping the exterior of your home looking pristine for many years. Our products are strong and attractive, but what makes them so unique? Every component is finished with exterior polyester paint on the outside and inside to give you a product that is durable and looks great from any angle. Plus, our gutter hanger is engineered to enable quick, safe, one-handed installation! For extra protection, add the Peak Aluminum Gutter Guard to your system to keep leaves and anything as thin as pine needles out!

  1. Pro pack comes with 100 pieces
  1. 10 inch strap is ideal for securely fastening 3-inch x 3-inch downspouts securely to your wall
  1. Made from heavy-gauge aluminum for increased strength and durability
  1. Finished with polyester paint on both sides
  1. More environmentally friendly than PVC alternatives
  1. Available in stock in select Eastern and Western Canada stores

Manual

  1. Install_Guide_FR.pdf
  2. Install_Guide_EN.pdf

The Home Depot will provide an accessible format of PDFs upon request. Please contact us at
1-800-628-0525.

Specifications

Dimensions

Assembled Depth (in inches)
5.458
Assembled Height (in inches)
2.287
Assembled Weight (in lbs)
3
Assembled Width (in inches)
0.885
Packaged Depth (in inches)
5.46
Packaged Height (in inches)
2.29
Packaged Weight (In lbs)
3
Packaged Width (in inches)
0.88

Details

Country of Origin
CN-China

Warranty / Certifications

For more information, please contact Peak Products customer service at 1-877-883-7325
Related Searches
primegrip anti vibration shingling hatchet
roofers world harness mount anchor
primegrip dual plate roof anchor
primegrip 2 notch deep hook blades
primegrip best damn ripper roofing shovel
adjustable brackets
workhorse temper reusable roof anchor
primegrip knuckle saver roofing knife

Related Products

Bakor Henry 481 Stop Leak 100% Spray Sealer in Black

Henry 481 Stop Leak 100% Silicone Spray Sealer is a premium, easy-to-use, 100% silicone aerosol leak sealer, formulated to provide a permanent leak-proof seal on a variety of surfaces. This multi-purpose leak sealer waterproofs and protects gutters, skylights, flashing, roofs, RVs, campers, windowsills, foundations, boats, cars, concrete, glass metal and more.

Henry 481 Stop Leak 100% Silicone Spray Sealer is a premium, easy-to-use, 100% silicone aerosol leak sealer, formulated to provide a permanent leak-proof seal on a variety of surfaces. This multi-purpose leak sealer waterproofs and protects gutters, skylights, flashing, roofs, RVs, campers, windowsills, foundations, boats, cars, concrete, glass metal and more.
View Details

Primegrip 2-Notch Deep Hook Blades - 100 Pack

Primegrip blades can be used with most utility and roofing knives to cut roofing shingles, felt paper, foam board, insulation, shingles and other building materials. Manufactured from high-grade carbon steel and induction hardened for longevity, our blades last up to 75% longer.

Primegrip blades can be used with most utility and roofing knives to cut roofing shingles, felt paper, foam board, insulation, shingles and other building materials. Manufactured from high-grade carbon steel and induction hardened for longevity, our blades last up to 75% longer.
View Details

Primegrip Anti-Vibration Shingling Hatchet

Solid steel shingling hatchet drop-forged from a single piece of high carbon steel for ultimate durability. The anti-vibration handle results in a smooth and comfortable experience.

Solid steel shingling hatchet drop-forged from a single piece of high carbon steel for ultimate durability. The anti-vibration handle results in a smooth and comfortable experience.
View Details

Primegrip Dual Plate Roof Anchor

Reusable, easy to install anchorage connector with dual plates. Rated for one person in Fall Arrest or Fall Restraint with a maximum combined weight of 310 lb (140 kg).

Reusable, easy to install anchorage connector with dual plates. Rated for one person in Fall Arrest or Fall Restraint with a maximum combined weight of 310 lb (140 kg).
View Details
13 1/2-inch Aluminum Gutter (Eavestrough) Downspout Strap in White Pro Pack (100 Pieces)Peak 13 1/2-inch Aluminum Gutter (Eavestrough) Downspout Strap in White Pro Pack (100 Pieces)Use the 13 1/2-inch Aluminum Downspout Strap to fasten 3-inch x 3-inch downpipes securely to your wall. Protect your home from water damage with Peak aluminum gutter, soffit and fascia products. Featuring precision design, our products can help prevent water and moisture damage to the roof, windows, walls and foundation. Made from heavy-gauge aluminum, our products are attractive, reliable and maintenance-free. They won't rust or leak, which is ideal for keeping the exterior of your home looking pristine for many years. Our products are strong and attractive, but what makes them so unique? Every component is finished with exterior polyester paint on the outside and inside to give you a product that is durable and looks great from any angle. Plus, our gutter hanger is engineered to enable quick, safe, one-handed installation! For extra protection, add the Peak Aluminum Gutter Guard to your system to keep leaves and anything as thin as pine needles out!
Peak
1001796748
CAD1992024-10-10
The Home Depot Canada
13 1/2-inch Aluminum Gutter (Eavestrough) Downspout Strap in White Pro Pack (100 Pieces) is rated 4.4 out of 5 by 378.
  • y_2024, m_10, d_10, h_4
  • bvseo_bulk, prod_bvrr, vn_bulk_3.0.42
  • cp_1, bvpage1
  • co_hasreviews, tv_255, tr_123
  • loc_en_CA, sid_1001796748, prod, sort_[SortEntry(order=RELEVANCE, direction=DESCENDING)]
  • clientName_homedepot-canada
  • bvseo_sdk, java_sdk, bvseo-4.0.0
  • CLOUD, getAggregateRating, 57ms
  • REVIEWS, PRODUCT
Rated 3 out of 5 by from Leaves & Debris ON gutter rather than IN gutter. I installed this kit around the back of my house where we have heavy leaf and tree debris. Usually, it takes a good hour of power washing to clean out my gutters each fall. This kit reduced my cleaning time down to about 10 minutes using only a leaf blower. Don't be misled – debris will still pile up on the gutter guard due to its design, just not *in* the gutter. I would have preferred a completely flat-surfaced design so the debris just blows off, but this kit was the only thing that fit my particular eaves roughing. To be fair, the retaining lip in the design that prevents debris from just blowing away, also prevents rain from washing right off the edge of the house.
Date published: 2021-11-19
Rated 4 out of 5 by from Did the trick I bought four of these as my house has a flat roof and the drains had no strainers of any kind. Most of the trees in my area have small leaves so I was concerned that the gap between the grating was too big. To supplement these I bought a small amount of screen door mesh and wrapped a piece around each strainer and then installed the ring. This worked great and allows water to still drain but nothing else to enter the drain. The included rings were slightly larger than my drains so because they are thin gauge aluminum I simply used a pair of scissor to make a cut from top to bottom. When I installed the rings into the drain the diameter could now be reduced and the ends just overlapped each other slightly.
Date published: 2017-04-07
Rated 4 out of 5 by from Nice gutter but use rivets! I followed Peaks instructions and ended up with a leaky gutter! The sections fit together poorly and when the joint hanger was screwed in gaps formed between the sections at the lap joints causing the thin layer of caulking to pull apart. I ended up assembling the entire gutter length (36') on the ground by caulking and clapping each lap joint and adding two aluminum rivets to the back (This Old House tip!) and one to the front near the top. I allowed 24 hours for the caulking to completely cure before moving the gutter.
Date published: 2016-09-15
Rated 5 out of 5 by from Great product but use some Philips screws Great product, better fit than the MHomes product. But I recommend you buy some SS Robertson pan heads so you can install one handed with the cordless drill. Phillips screws are a poor choice. But the actual gutter guard is great, good end to end recessed nested fit. Appreciated the pre-etched cardboard corner template. I would use again and recommend. I await to see how they do in winter and big storm events. But this locatoin is too high to clean from a ladder. I was able to install from the roof (using safety equipment)
Date published: 2013-10-08
Rated 5 out of 5 by from Peak Products 5" Aluminum Gutter Guard An incredibly ingenious design! An absolute snap to install especially for someone like me who is spatially challenged. The 4 ft. length makes it easy to handle - especially when you're up on a ladder or on the roof. Every length is a perfect fit and attached with only 3 self tapping metal screws. The Peak "Gutter Guard" is, in my opinion, the best gutter guard on the market. Superb construction, well priced and after 4 months of heavy rains, they work flawlessly.
Date published: 2013-03-04
Rated 3 out of 5 by from Ambivalent I decided to wait for a few months after installing before I commented. As previously mentioned by others, easy to install, fit into gutters nice and snugly, Canadian made, decent price point and really do work at keeping eaves troughs from plugging up. Unfortunately guards are stamped in such a way that when installed there is a sheltered 3/8 inch deep by approximately 2 1/2 inch wide "dead zone" the entire length of the trough. Pine needles in particular accumulate (pile?) in this dead zone restricting water from entering the gutter trough. So far I've taken the leaf blower out once a month to blow off the pine needles. If the top of the gutter guard were not "a dead zone" but were flat or convex, the prevailing breeze may have been able to blow some of the deterius away instead of me pulling out the leaf blower. I expected more from the product and wish I had researched other alternatives a little more thoroughly.
Date published: 2019-08-14
Rated 1 out of 5 by from Plastic too weak to stay in place It's been 2 years since I installed these around my garage to prevent leaves from clogging the eves. Since then the flimsy plastic mesh has collapsed and sunk into the eves troughs. The leaves still collect in the troughs on top of the mesh, but the mesh does seem to prevent the troughs from blocking the downspouts completely. At least for now... I anticipate as more leaves build up the weak mesh will collapse even more, with the result the downspouts will eventually clog totally again. I'm getting quotes for a proper aluminum eves trough filter system, which I should have done in the first place. Stay away from this product as it fails miserably...
Date published: 2023-05-24
Rated 1 out of 5 by from Cheap is the only thing going for it What a frustrating waste of time that was. The stems of the leaves drop through the giant mesh holes, trapping the leaves from blowing away, and the finer tree blossoms would get matted in the mesh. There's also not enough rigidity to hold them in place. They would collapse in some spots and pop out in others. All kinds of debris made it through these guards. Spent more time cleaning the mesh and refitting them than I would have just cleaning the gutters.
Date published: 2020-12-27
  • y_2024, m_10, d_10, h_4
  • bvseo_bulk, prod_bvrr, vn_bulk_3.0.42
  • cp_1, bvpage1
  • co_hasreviews, tv_255, tr_123
  • loc_en_CA, sid_1001796748, prod, sort_[SortEntry(order=RELEVANCE, direction=DESCENDING)]
  • clientName_homedepot-canada
  • bvseo_sdk, java_sdk, bvseo-4.0.0
  • CLOUD, getReviews, 31ms
  • REVIEWS, PRODUCT

Hi. I have a 42 foot length of gutter. If this fits under drip edge would the last half of the run be at a pretty severe slope and just drain the water over the side with a heavy downpour?

Asked by: Robin
Hi, Thank you for your question, The gutter guards are compatible with a roof that has an installed drip edge. The guards will not impede the flow or drainage of your gutters. Please get in touch with us at 1-877-883-7325 or by e-mail at cservice@peakproducts.com for further assistance.
Answered by: Product Expert
Date published: 2024-09-28

Will this product work if the roof has drip edge installed?

Asked by: Martin
Yes- no problem.
Answered by: DGRs
Date published: 2023-04-13

Wouldn't leaves, dirt, moss, pine needles, branch debris etc. accumulate on top this mesh which would block many of the holes in the mesh causing rainwater overflow during heavy rain ?

Asked by: cantrin
The wind does a great job of keeping the top clear
Answered by: Rich
Date published: 2024-06-12

How do you install the gutter guard with a metal roof? Can you post the installation manual?

Asked by: pinky
Hello pinky, thanks for your question. You can view all of our installation guides on peakproducts.com. Thank you!
Answered by: Product Expert
Date published: 2020-06-03

Hi, I have an old gutter system which using nails. Some of the nails are broken so I need to replace them. Will this gutter hanger work for the old gutter system? Thanks.

Asked by: Jack
We used these hangers to replace nails in older gutters.
Answered by: Gccc
Date published: 2020-05-27

Since these lay flat in the gutter creating a mini trough, it looks like debris will sit there eventually preventing water from getting in the gutter.  Other brands, like Easyon have a slope that looks like debris might slide off. Do either ot these clog?

Asked by: Roter
Peak Products Gutter Guard are made from heavy duty aluminum which even allowed me to rest a step ladder against the eavestrough and no damage was caused.  I have no issues with the mini trough you have mentioned and this helps prevent excessive rainfall from flowing over the eaves. 
Answered by: Brad
Date published: 2020-09-25

How does it withstand heavy snowfalls?

Asked by: gill
Hello gill, thank you for your question. This gutter guard is made keeping in mind the weather in Canada all year round.
Answered by: Product Expert
Date published: 2024-08-21

Is this item designed to fit under the drip edge 

Asked by: Billysw6
Hello Billysw6, thank you for your question. Yes, it should fit under the drip edge.
Answered by: Product Expert
Date published: 2021-06-28
  • y_2024, m_10, d_10, h_4CST
  • bvseo_bulk, prod_bvqa, vn_bulk_3.0.42
  • cp_1, bvpage1
  • co_hasquestionsanswers, tq_71
  • loc_en_CA, sid_1001796748, prod, sort_[SortEntry(order=NUM_ANSWERS, direction=DESCENDING)]
  • clientName_homedepot-canada
  • bvseo_sdk, java_sdk, bvseo-4.0.0
  • CLOUD, getContent, 56ms
  • QUESTIONS, PRODUCT