Place your orders by December 15 to get them delivered in time for the holidays.  Learn More

Peak 2-inch x 3-inch Aluminum Downspout A-Elbow in Brown

Model # 3742|Store SKU # 1000183423

Overview

Model # 3742 Store SKU # 1000183423

Protect your home from water damage with Peak aluminum gutter, soffit and fascia products. Featuring precision design, our products can help prevent water and moisture damage to the roof, windows, walls and foundation. Made from heavy-gauge aluminum, our products are attractive, reliable and maintenance-free. They won't rust or leak, which is ideal for keeping the exterior of your home looking pristine for many years. Our products are strong and attractive, but what makes them so unique? Every component is finished with exterior polyester paint on the outside and inside to give you a product that is durable and looks great from any angle. Plus, our gutter hanger is engineered to enable quick, safe, one-handed installation! For extra protection, add the Peak Aluminum Gutter Guard to your system to keep leaves and anything as thin as pine needles out! Use the 2-inch x 3-inch Aluminum Downspout A-Elbow to direct runoff towards the front and away from the wall.

  1. Compatible with 2-inch x 3-inch downspouts
  1. Made from heavy-gauge aluminum for increased strength and durability
  1. Finished with exterior polyester paint on both sides of the elbow
  1. Front elbow for use at the top and bottom of downspout to direct runoff towards the front and away from the wall
  1. Precision design ensures a watertight fit
  1. More environmentally friendly than PVC alternatives
  1. Install the Peak Aluminum Gutter Guard to keep leaves, debris, and pine needles from clogging your gutter system

Specifications

Dimensions

Assembled Depth (in inches)
6.50
Assembled Height (in inches)
3
Assembled Weight (in lbs)
0.21
Assembled Width (in inches)
6.50
Packaged Depth (in inches)
7.25
Packaged Height (in inches)
3.58
Packaged Weight (In lbs)
0.22
Packaged Width (in inches)
7.25

Details

Country of Origin
CA-Canada
Gutter Size
5 in.
Material
Aluminum

Warranty / Certifications

For more information, please contact Peak Products customer service at 1-877-883-7325
2-inch x 3-inch Aluminum Downspout A-Elbow in BrownPeak 2-inch x 3-inch Aluminum Downspout A-Elbow in BrownProtect your home from water damage with Peak aluminum gutter, soffit and fascia products. Featuring precision design, our products can help prevent water and moisture damage to the roof, windows, walls and foundation. Made from heavy-gauge aluminum, our products are attractive, reliable and maintenance-free. They won't rust or leak, which is ideal for keeping the exterior of your home looking pristine for many years. Our products are strong and attractive, but what makes them so unique? Every component is finished with exterior polyester paint on the outside and inside to give you a product that is durable and looks great from any angle. Plus, our gutter hanger is engineered to enable quick, safe, one-handed installation! For extra protection, add the Peak Aluminum Gutter Guard to your system to keep leaves and anything as thin as pine needles out! Use the 2-inch x 3-inch Aluminum Downspout A-Elbow to direct runoff towards the front and away from the wall.
Peak
1000183423
CAD6.362022-12-10
The Home Depot Canada
2-inch x 3-inch Aluminum Downspout A-Elbow in Brown is rated 4.5 out of 5 by 293.
  • y_2022, m_12, d_8, h_21
  • bvseo_bulk, prod_bvrr, vn_bulk_3.0.34
  • cp_1, bvpage1
  • co_hasreviews, tv_209, tr_84
  • loc_en_CA, sid_1000183423, prod, sort_[SortEntry(order=RELEVANCE, direction=DESCENDING)]
  • clientName_homedepot-canada
  • bvseo_sdk, java_sdk, bvseo-4.0.0
  • CLOUD, getAggregateRating, 69ms
  • REVIEWS, PRODUCT
Rated 4 out of 5 by from Did the trick I bought four of these as my house has a flat roof and the drains had no strainers of any kind. Most of the trees in my area have small leaves so I was concerned that the gap between the grating was too big. To supplement these I bought a small amount of screen door mesh and wrapped a piece around each strainer and then installed the ring. This worked great and allows water to still drain but nothing else to enter the drain. The included rings were slightly larger than my drains so because they are thin gauge aluminum I simply used a pair of scissor to make a cut from top to bottom. When I installed the rings into the drain the diameter could now be reduced and the ends just overlapped each other slightly.
Date published: 2017-04-07
Rated 3 out of 5 by from Leaves & Debris ON gutter rather than IN gutter. I installed this kit around the back of my house where we have heavy leaf and tree debris. Usually, it takes a good hour of power washing to clean out my gutters each fall. This kit reduced my cleaning time down to about 10 minutes using only a leaf blower. Don't be misled – debris will still pile up on the gutter guard due to its design, just not *in* the gutter. I would have preferred a completely flat-surfaced design so the debris just blows off, but this kit was the only thing that fit my particular eaves roughing. To be fair, the retaining lip in the design that prevents debris from just blowing away, also prevents rain from washing right off the edge of the house.
Date published: 2021-11-19
Rated 4 out of 5 by from Nice gutter but use rivets! I followed Peaks instructions and ended up with a leaky gutter! The sections fit together poorly and when the joint hanger was screwed in gaps formed between the sections at the lap joints causing the thin layer of caulking to pull apart. I ended up assembling the entire gutter length (36') on the ground by caulking and clapping each lap joint and adding two aluminum rivets to the back (This Old House tip!) and one to the front near the top. I allowed 24 hours for the caulking to completely cure before moving the gutter.
Date published: 2016-09-15
Rated 5 out of 5 by from Peak Products 5" Aluminum Gutter Guard An incredibly ingenious design! An absolute snap to install especially for someone like me who is spatially challenged. The 4 ft. length makes it easy to handle - especially when you're up on a ladder or on the roof. Every length is a perfect fit and attached with only 3 self tapping metal screws. The Peak "Gutter Guard" is, in my opinion, the best gutter guard on the market. Superb construction, well priced and after 4 months of heavy rains, they work flawlessly.
Date published: 2013-03-04
Rated 5 out of 5 by from Great product but use some Philips screws Great product, better fit than the MHomes product. But I recommend you buy some SS Robertson pan heads so you can install one handed with the cordless drill. Phillips screws are a poor choice. But the actual gutter guard is great, good end to end recessed nested fit. Appreciated the pre-etched cardboard corner template. I would use again and recommend. I await to see how they do in winter and big storm events. But this locatoin is too high to clean from a ladder. I was able to install from the roof (using safety equipment)
Date published: 2013-10-08
Rated 3 out of 5 by from Ambivalent I decided to wait for a few months after installing before I commented. As previously mentioned by others, easy to install, fit into gutters nice and snugly, Canadian made, decent price point and really do work at keeping eaves troughs from plugging up. Unfortunately guards are stamped in such a way that when installed there is a sheltered 3/8 inch deep by approximately 2 1/2 inch wide "dead zone" the entire length of the trough. Pine needles in particular accumulate (pile?) in this dead zone restricting water from entering the gutter trough. So far I've taken the leaf blower out once a month to blow off the pine needles. If the top of the gutter guard were not "a dead zone" but were flat or convex, the prevailing breeze may have been able to blow some of the deterius away instead of me pulling out the leaf blower. I expected more from the product and wish I had researched other alternatives a little more thoroughly.
Date published: 2019-08-14
Rated 5 out of 5 by from Almost perfect Likes: Snaps into eavestrough until you can screw it down. Nests either over or under a drip edge, depending on where you are in the slope of the run. Holes small enough to keep out pine needles. No need to screw to (and compromise) fascia. Sloped side directs water away from fascia, preventing wood rot. Suggestions: It's easier to miter at corners if you follow the holes as shown in the template picture printed inside the carton. I'm surprised that the manufacturer doesn't prepunch 3 - 6 screw holes along the outer edge of each piece. Each piece looks to be punched before forming it. This would help guide the screw to the trough. Instead of phillips screws, buy a package of ¼" hex head self tapping screws and a magnetic driver bit. That's what the pros use, for ease, speed and safety. Use stainless steel Robertson® metal screws if rust is a concern.
Date published: 2018-11-09
Rated 4 out of 5 by from Good product After struggling with the first section, I opted to pre-drill the flange for screw holes as I found without that, the screws skidded on the shiny surface. I also used Robertson screws, but then, that's what Canadians do!
Date published: 2016-09-16
  • y_2022, m_12, d_8, h_21
  • bvseo_bulk, prod_bvrr, vn_bulk_3.0.34
  • cp_1, bvpage1
  • co_hasreviews, tv_209, tr_84
  • loc_en_CA, sid_1000183423, prod, sort_[SortEntry(order=RELEVANCE, direction=DESCENDING)]
  • clientName_homedepot-canada
  • bvseo_sdk, java_sdk, bvseo-4.0.0
  • CLOUD, getReviews, 22ms
  • REVIEWS, PRODUCT

Wouldn't leaves, dirt, moss, pine needles, branch debris etc. accumulate on top this mesh which would block many of the holes in the mesh causing rainwater overflow during heavy rain ?

Asked by: cantrin
Yes it will accumulate but does was and blow off. Had 5" for years and really no problem. Lots of pine needles leaves etc
Answered by: Shaddykins
Date published: 2021-10-01

How do you install the gutter guard with a metal roof? Can you post the installation manual?

Asked by: pinky
Hello pinky, thanks for your question. You can view all of our installation guides on peakproducts.com. Thank you!
Answered by: Product Expert
Date published: 2020-06-03

Hi, I have an old gutter system which using nails. Some of the nails are broken so I need to replace them. Will this gutter hanger work for the old gutter system? Thanks.

Asked by: Jack
I had the same issue. I found the gutter hangers worked well replacing the missing spikes and keeping the eaves flowing towards the downpipes.
Answered by: Rich
Date published: 2020-05-25

Since these lay flat in the gutter creating a mini trough, it looks like debris will sit there eventually preventing water from getting in the gutter.  Other brands, like Easyon have a slope that looks like debris might slide off. Do either ot these clog?

Asked by: Roter
I have not had any clogging at all. In fact i checked last week because of the same concern that you are questioning, and i found no build-up of foreign materials/leaves etc. Mine were installed over a year ago.
Answered by: Anthony63
Date published: 2020-09-23

Can I use this as a soffit for my front porch which is 8x12ft with an attached turret porch extension?

Asked by: Allen
Yes you could but I would reccomend using perforated to ensure proper ventilation is maintained 
Answered by: None
Date published: 2021-04-03

Is this item designed to fit under the drip edge 

Asked by: Billysw6
Yes it has helped. Only one thing i noticed was that whenever it snowed and melted, the melted snow was dripping all around the house which was not happening before we could fix the gutter guard. Can you please advise why it's happening - would appreciate.
Answered by: Benny
Date published: 2021-06-30

What is the recommended spacing?

Asked by: jeffthegeo
In warmer climates without snow and ice build regular spacing of 36 inches on centre but in the case of snow ice which we are used to 18 inch spacing is standard. I cut that down to @14 inches give or take where the eavestrough was taking on a larger amount of ice which began to buckle it, giving it more support. Hopes this helps.
Answered by: nick60
Date published: 2021-03-10

Does it work to keep out pine needles?

Asked by: Greg
Hi Greg, thank you for your question. This gutter guard is effective in keeping pine needles out.
Answered by: Product Expert
Date published: 2021-06-09
  • y_2022, m_12, d_8, h_21CST
  • bvseo_bulk, prod_bvqa, vn_bulk_3.0.34
  • cp_1, bvpage1
  • co_hasquestionsanswers, tq_63
  • loc_en_CA, sid_1000183423, prod, sort_[SortEntry(order=NUM_ANSWERS, direction=DESCENDING)]
  • clientName_homedepot-canada
  • bvseo_sdk, java_sdk, bvseo-4.0.0
  • CLOUD, getContent, 73ms
  • QUESTIONS, PRODUCT