Peak Flashing Step 3 x 4 x 13 In. Brown

Black Knight 4 kg Wet/Dry Roof Repair

Especially formulated to provide excellent adhesion to wet or frozen surfaces. Heavy bodied trowel grade. If kept warm prior to use can be used to -25C. Water displacing formulation. Use to adhere loose shingles, repair leaky flashings, repair minor holes to 6mm (1/4"). For larger holes use Yellow Jacket imbedded in Wet/Dry Roof Repair

DAP POLYURETHANE Premium Construction Adhesive Sealant Black 300 mL

DAP Premium Polyurethane Roof & Flashing Sealant is a low modulus, one-part, moisture-curing, commercial grade sealant. It is specially formulated to provide a permanent, waterproof seal when filling gaps, joints and cracks in a variety of roof surfaces. This durable, high performance sealant offers superior adhesion to most substrates without the use of a primer. It remains permanently flexible to withstand up to 50% total joint movement when installed into a properly prepared joint.

Grace Ice & Water Shield 3 Feet Wide And 67 Feet Long

Grace Ice & Water Shield is a self-adhering rubberized asphalt roofing underlayment that protects against ice packed roofs and wind driven rain. It is a premier peel & stick roofing underlayment that bonds firmly to the roof deck, seals around nails without heat or special adhesives. The patented Ripcord is a unique feature that makes Grace Ice & Water Shield easier to apply by giving the applicator a split release on demand. Faster application of the membrane in the straight-aways, as well as ease of membrane positioning in the detailed areas (valleys, etc.) are just some of the benefits.

WarmlyYours 3 Ft Pipe Heating Cable Kit Plug_In 120V

A burst water pipe in the dead of winter can be a huge inconvenience and completely replacing the insulation needed to prevent pipes in perimeter walls and crawlspaces from freezing can be cost-prohibitive. To keep your most vulnerable pipes from freezing, the simple and DIY-friendly solution is to install a PRO-Tect heating cable for pipes. This 120 V plug-in heating cable generates heat (7 watts per linear foot) which will keep your pipes from freezing in low temperatures. The integrated thermostat control, located between the non-heating lead cable and the heating wire itself, will ensure a consistent temperature while minimizing energy use. The thermostat turns the heating cable on when exposed to temperatures below 37.4°F (3°C). It will shut the heating cable off when the pipe has been heated to a temperature of approximately 50°F (10°C). The cable is covered by a 2-year warranty.