Shop incredible Black Friday deals now! Hurry, event ends December 3.  Shop event.

Overview

Model # 1720 Store SKU # 1000183317

Protect your home from water damage with Peak aluminum gutter, soffit and fascia products. Featuring precision design, our products can help prevent water and moisture damage to the roof, windows, walls and foundation. Made from heavy-gauge aluminum, our products are attractive, reliable and maintenance-free. They won't rust or leak, which is ideal for keeping the exterior of your home looking pristine for many years. Our products are strong and attractive, but what makes them so unique? Every component is finished with exterior polyester paint on the outside and inside to give you a product that is durable and looks great from any angle. Plus, our gutter hanger is engineered to enable quick, safe, one-handed installation! For extra protection, add the Peak Aluminum Gutter Guard to your system to keep leaves and anything as thin as pine needles out! Use the 4-inch Outside Corner Gutter Mitre with 4-inch gutters to create outside corners. Precision design ensures a watertight fit.

  1. Use with 4-inch gutters to create outside corners
  1. Made from heavy-gauge aluminum for increased strength and durability
  1. Finished with exterior polyester paint on both sides of the gutter
  1. Inside lip provides greater holding power for gutter hanger
  1. Precision design ensures a watertight fit for complete peace of mind
  1. Available in stock in all Western Canada stores
  1. Install the Peak Aluminum Gutter Guard to keep leaves, debris, and pine needles from clogging your gutter system
  1. Made in Canada

Specifications

Dimensions

Assembled Depth (in inches)
8
Assembled Height (in inches)
3.25
Assembled Weight (in lbs)
0.37
Assembled Width (in inches)
8
Packaged Depth (in inches)
8
Packaged Height (in inches)
3.02
Packaged Weight (In lbs)
0.22
Packaged Width (in inches)
8

Details

Country of Origin
CA-Canada
Gutter Size
4 in.
Material
Aluminum

Warranty / Certifications

For more information, please contact Peak Products customer service at 1-877-883-7325
4-inch Aluminum Outside Corner Gutter (Eavestrough) Mitre in WhitePeak 4-inch Aluminum Outside Corner Gutter (Eavestrough) Mitre in WhiteProtect your home from water damage with Peak aluminum gutter, soffit and fascia products. Featuring precision design, our products can help prevent water and moisture damage to the roof, windows, walls and foundation. Made from heavy-gauge aluminum, our products are attractive, reliable and maintenance-free. They won't rust or leak, which is ideal for keeping the exterior of your home looking pristine for many years. Our products are strong and attractive, but what makes them so unique? Every component is finished with exterior polyester paint on the outside and inside to give you a product that is durable and looks great from any angle. Plus, our gutter hanger is engineered to enable quick, safe, one-handed installation! For extra protection, add the Peak Aluminum Gutter Guard to your system to keep leaves and anything as thin as pine needles out! Use the 4-inch Outside Corner Gutter Mitre with 4-inch gutters to create outside corners. Precision design ensures a watertight fit.
Peak
1000183317
4-inch Aluminum Outside Corner Gutter (Eavestrough) Mitre in White is rated 4.4 out of 5 by 349.
  • y_2023, m_11, d_27, h_7
  • bvseo_bulk, prod_bvrr, vn_bulk_3.0.37
  • cp_1, bvpage1
  • co_hasreviews, tv_241, tr_108
  • loc_en_CA, sid_1000183317, prod, sort_[SortEntry(order=RELEVANCE, direction=DESCENDING)]
  • clientName_homedepot-canada
  • bvseo_sdk, java_sdk, bvseo-4.0.0
  • CLOUD, getAggregateRating, 74ms
  • REVIEWS, PRODUCT
Rated 3 out of 5 by from Leaves & Debris ON gutter rather than IN gutter. I installed this kit around the back of my house where we have heavy leaf and tree debris. Usually, it takes a good hour of power washing to clean out my gutters each fall. This kit reduced my cleaning time down to about 10 minutes using only a leaf blower. Don't be misled – debris will still pile up on the gutter guard due to its design, just not *in* the gutter. I would have preferred a completely flat-surfaced design so the debris just blows off, but this kit was the only thing that fit my particular eaves roughing. To be fair, the retaining lip in the design that prevents debris from just blowing away, also prevents rain from washing right off the edge of the house.
Date published: 2021-11-19
Rated 4 out of 5 by from Did the trick I bought four of these as my house has a flat roof and the drains had no strainers of any kind. Most of the trees in my area have small leaves so I was concerned that the gap between the grating was too big. To supplement these I bought a small amount of screen door mesh and wrapped a piece around each strainer and then installed the ring. This worked great and allows water to still drain but nothing else to enter the drain. The included rings were slightly larger than my drains so because they are thin gauge aluminum I simply used a pair of scissor to make a cut from top to bottom. When I installed the rings into the drain the diameter could now be reduced and the ends just overlapped each other slightly.
Date published: 2017-04-07
Rated 4 out of 5 by from Nice gutter but use rivets! I followed Peaks instructions and ended up with a leaky gutter! The sections fit together poorly and when the joint hanger was screwed in gaps formed between the sections at the lap joints causing the thin layer of caulking to pull apart. I ended up assembling the entire gutter length (36') on the ground by caulking and clapping each lap joint and adding two aluminum rivets to the back (This Old House tip!) and one to the front near the top. I allowed 24 hours for the caulking to completely cure before moving the gutter.
Date published: 2016-09-15
Rated 5 out of 5 by from Peak Products 5" Aluminum Gutter Guard An incredibly ingenious design! An absolute snap to install especially for someone like me who is spatially challenged. The 4 ft. length makes it easy to handle - especially when you're up on a ladder or on the roof. Every length is a perfect fit and attached with only 3 self tapping metal screws. The Peak "Gutter Guard" is, in my opinion, the best gutter guard on the market. Superb construction, well priced and after 4 months of heavy rains, they work flawlessly.
Date published: 2013-03-04
Rated 5 out of 5 by from Great product but use some Philips screws Great product, better fit than the MHomes product. But I recommend you buy some SS Robertson pan heads so you can install one handed with the cordless drill. Phillips screws are a poor choice. But the actual gutter guard is great, good end to end recessed nested fit. Appreciated the pre-etched cardboard corner template. I would use again and recommend. I await to see how they do in winter and big storm events. But this locatoin is too high to clean from a ladder. I was able to install from the roof (using safety equipment)
Date published: 2013-10-08
Rated 3 out of 5 by from Ambivalent I decided to wait for a few months after installing before I commented. As previously mentioned by others, easy to install, fit into gutters nice and snugly, Canadian made, decent price point and really do work at keeping eaves troughs from plugging up. Unfortunately guards are stamped in such a way that when installed there is a sheltered 3/8 inch deep by approximately 2 1/2 inch wide "dead zone" the entire length of the trough. Pine needles in particular accumulate (pile?) in this dead zone restricting water from entering the gutter trough. So far I've taken the leaf blower out once a month to blow off the pine needles. If the top of the gutter guard were not "a dead zone" but were flat or convex, the prevailing breeze may have been able to blow some of the deterius away instead of me pulling out the leaf blower. I expected more from the product and wish I had researched other alternatives a little more thoroughly.
Date published: 2019-08-14
Rated 5 out of 5 by from Almost perfect Likes: Snaps into eavestrough until you can screw it down. Nests either over or under a drip edge, depending on where you are in the slope of the run. Holes small enough to keep out pine needles. No need to screw to (and compromise) fascia. Sloped side directs water away from fascia, preventing wood rot. Suggestions: It's easier to miter at corners if you follow the holes as shown in the template picture printed inside the carton. I'm surprised that the manufacturer doesn't prepunch 3 - 6 screw holes along the outer edge of each piece. Each piece looks to be punched before forming it. This would help guide the screw to the trough. Instead of phillips screws, buy a package of ¼" hex head self tapping screws and a magnetic driver bit. That's what the pros use, for ease, speed and safety. Use stainless steel Robertson® metal screws if rust is a concern.
Date published: 2018-11-09
Rated 4 out of 5 by from Good product After struggling with the first section, I opted to pre-drill the flange for screw holes as I found without that, the screws skidded on the shiny surface. I also used Robertson screws, but then, that's what Canadians do!
Date published: 2016-09-16
  • y_2023, m_11, d_27, h_7
  • bvseo_bulk, prod_bvrr, vn_bulk_3.0.37
  • cp_1, bvpage1
  • co_hasreviews, tv_241, tr_108
  • loc_en_CA, sid_1000183317, prod, sort_[SortEntry(order=RELEVANCE, direction=DESCENDING)]
  • clientName_homedepot-canada
  • bvseo_sdk, java_sdk, bvseo-4.0.0
  • CLOUD, getReviews, 49ms
  • REVIEWS, PRODUCT

Hi. I have a 42 foot length of gutter. If this fits under drip edge would the last half of the run be at a pretty severe slope and just drain the water over the side with a heavy downpour?

Asked by: Robin
The gutter guard does fit under the shingles that should already be extending over your gutter, so you should have no problem with leakage there. In a really heavy downpour there is potential, in theory, for the water to come off the gutter but i have not had an issue with that. I use a brush on an extended pole to brush away anything that might accumulate and I have not had to go on my roof for about three years and I was going up a couple of times a year previously. I did find gutter guards with smaller holes or mesh tended to have water come over them. These are the best gutter guards I have found I I have tested out a few types..
Answered by: Johnny
Date published: 2023-08-31

Wouldn't leaves, dirt, moss, pine needles, branch debris etc. accumulate on top this mesh which would block many of the holes in the mesh causing rainwater overflow during heavy rain ?

Asked by: cantrin
Any debris that sits on the top of the mesh just blows off, does not ever block the holes. Never over flows, I have them on my house and my cottage.
Answered by: Jen L
Date published: 2021-10-03

How do you install the gutter guard with a metal roof? Can you post the installation manual?

Asked by: pinky
These gutter guards are installed on your gutters (which channel water to the down-pipes). Your metal roof channels the water to your gutters. These gutter guards are excellent in keeping leaves from entering the gutters and the down-pipes.
Answered by: Anthony63
Date published: 2020-06-03

Hi, I have an old gutter system which using nails. Some of the nails are broken so I need to replace them. Will this gutter hanger work for the old gutter system? Thanks.

Asked by: Jack
Hello Jack, and thanks for your question. This should be a great solution for you. You can see how these are installed on our web page at peakproducts.com. Good luck with your project, and don't hesitate to call if you have any additional questions at all. Thank you!
Answered by: Product Expert
Date published: 2021-09-17

Since these lay flat in the gutter creating a mini trough, it looks like debris will sit there eventually preventing water from getting in the gutter.  Other brands, like Easyon have a slope that looks like debris might slide off. Do either ot these clog?

Asked by: Roter
I was concerned with this as well, however I have found that leaves and needles dry on the guard and then blow off with the wind.
Answered by: Eric D
Date published: 2020-09-23

Will this product work if the roof has drip edge installed?

Asked by: Martin
Yes- no problem.
Answered by: DGRs
Date published: 2023-04-13

Can I use this as a soffit for my front porch which is 8x12ft with an attached turret porch extension?

Asked by: Allen
Hi Allen, Yes this would be perfectly feasible with this product, however as another member pointed out it would be best to use vented soffit to ensure ventilation is adequate. Thank you Allen.
Answered by: Product Expert
Date published: 2021-04-14

Is this item designed to fit under the drip edge 

Asked by: Billysw6
Hello Billysw6, thank you for your question. Yes, it should fit under the drip edge.
Answered by: Product Expert
Date published: 2021-06-28
  • y_2023, m_11, d_27, h_7CST
  • bvseo_bulk, prod_bvqa, vn_bulk_3.0.37
  • cp_1, bvpage1
  • co_hasquestionsanswers, tq_71
  • loc_en_CA, sid_1000183317, prod, sort_[SortEntry(order=NUM_ANSWERS, direction=DESCENDING)]
  • clientName_homedepot-canada
  • bvseo_sdk, java_sdk, bvseo-4.0.0
  • CLOUD, getContent, 73ms
  • QUESTIONS, PRODUCT