Christmas Appliances Bath Blinds & Window Coverings Building Materials Cleaning Decking, Lumber & Composites Décor & Furniture Doors & Windows Electrical Floors & Area Rugs Hardware Heating & Cooling Kitchen Lighting & Ceiling Fans Outdoor Cooking & BBQs Outdoor Living & Patio Paint Plumbing Smart Home Storage & Organization Tools All Departments Black Friday Holiday Gift Centre Winter Home Maintenance Checklist
Shop incredible Black Friday deals now! Hurry, event ends December 3.  Shop event.

Peak Drip Flashing, 2 x 7/8 x 3/8 In. - Brown Galvanized

Model # 8532|Store SKU # 1000109769

Peak Drip Flashing, 2 x 7/8 x 3/8 In. - Brown Galvanized

Overview

Model # 8532 Store SKU # 1000109769

Peak's galvanized metal flashings help direct flow of rainwater away from roofs, decks and other home surfaces. Drip Flashing is used above windows, doors, garage doors, etc. This product has a Hemmed or Safety Edge.

  1. Heavy-duty 29-gauge steel increases strength and durability
  1. Durable coating for exterior use
  1. For use above doors, windows and garage door

Specifications

Dimensions

Assembled Depth (in inches)
0.38
Assembled Height (in inches)
2
Assembled Weight (in lbs)
0.04
Assembled Width (in inches)
0.88
Packaged Depth (in inches)
120
Packaged Height (in inches)
1
Packaged Weight (In lbs)
1.98
Packaged Width (in inches)
2

Details

Country of Origin
CA-Canada
Material
Steel

Warranty / Certifications

For more information, please contact Peak Products customer service at 1-877-883-7325
Related Searches
vent pipe flashing
roll roofing
roof panels
roof repair maintenance
roofing underlayments
onduline onduvilla shingles siena brown
onduline onduvilla slim cap siena brown
peak roof edge flashing

Related Products

BP Everest Autumn Brown Fiberglass Laminate Shingle

TAKE BEAUTY AND PROTECTION TO THE TOP. This double-layer laminate features larger tabs for a bolder appearance and dramatic colors for eye-catching elegance. Its generous nailing zone allows for easier installation and shingle performance.

TAKE BEAUTY AND PROTECTION TO THE TOP. This double-layer laminate features larger tabs for a bolder appearance and dramatic colors for eye-catching elegance. Its generous nailing zone allows for easier installation and shingle performance.
View Details

Euramax Canada F4 1/2 Brown Vinyl Drip Edge

Amerimx Brown Vinyl Drip Edge is used to protect the roof edge and direct roof run-off into the gutter system. Manufactured from durable vinyl it never needs painted.

Amerimx Brown Vinyl Drip Edge is used to protect the roof edge and direct roof run-off into the gutter system. Manufactured from durable vinyl it never needs painted.
View Details

Onduline Onduvilla Slim Cap Siena Brown

Slim Cap can be used for ridges and hips. Used for roofs with a pitch up to 10/12. Provides a clean, neat finish line.

Slim Cap can be used for ridges and hips. Used for roofs with a pitch up to 10/12. Provides a clean, neat finish line.
View Details

Onduline Onduvilla Shingles Siena Brown

Onduvilla is the product of the future. It is the new design in shingles. Onduvilla is a truly unique roofing solution. It is a complete system, offering beauty, a wide choice of colors and looks, as well as easy installation.

Onduvilla is the product of the future. It is the new design in shingles. Onduvilla is a truly unique roofing solution. It is a complete system, offering beauty, a wide choice of colors and looks, as well as easy installation.
View Details
Drip Flashing, 2 x 7/8 x 3/8 In. - Brown GalvanizedPeak Drip Flashing, 2 x 7/8 x 3/8 In. - Brown GalvanizedPeak's galvanized metal flashings help direct flow of rainwater away from roofs, decks and other home surfaces. Drip Flashing is used above windows, doors, garage doors, etc. This product has a Hemmed or Safety Edge.
Peak
1000109769
Drip Flashing, 2 x 7/8 x 3/8 In. - Brown Galvanized is rated 4.0 out of 5 by 57.
  • y_2023, m_11, d_27, h_7
  • bvseo_bulk, prod_bvrr, vn_bulk_3.0.37
  • cp_1, bvpage1
  • co_hasreviews, tv_43, tr_14
  • loc_en_CA, sid_1000109769, prod, sort_[SortEntry(order=RELEVANCE, direction=DESCENDING)]
  • clientName_homedepot-canada
  • bvseo_sdk, java_sdk, bvseo-4.0.0
  • CLOUD, getAggregateRating, 71ms
  • REVIEWS, PRODUCT
Rated 5 out of 5 by from Easy to work with, Very durable paint finish Over the past 2 years I’ve purchased about 15 lengths for a foundation waterproofing project where plywood, blue skin, dimple board met the parging above. 10 foot lengths fit well into the SUV - put a sock over each end so the inside of your vehicle is protected during transportation. Pieces are easy to work with tin snip scissors ✂️. Easy to join together by opening 1/4 inch of the edge flange. I’m buying 8 more today for another job. See photo with the red arrow. Drip rail missed during vinyl siding job 11 years ago. During a test fit (not in photo) , this metal drip flashing fit perfectly since it’s so thin but strong. The equivalent in vinyl was too thick to fit in without cutting the foundation wall.
Date published: 2021-10-22
Rated 1 out of 5 by from Note: Brown on inside & white on outside Careful, as picture shows brown on both sides. Unfortunately the ones I were given were brown on inside & white on outside - not what I wanted, or needed!! Problem with not being able to go into the store, and having to rely on incorrectly identified product or alternative products??
Date published: 2021-05-10
Rated 2 out of 5 by from White but only on the inside I bought two of these. When the guy showed up at curbside pickup, I noticed they where only white on inside and brown in the outside. Off course if I make sure to select white, that's because it's the color I intend to use. But brown? No! That is not right that needs to change! I politely inquired if he could double check if this was the only format they had in stock, and it was. Therefore, my hand was forced to spend more money to buy paint and more time to apply it.
Date published: 2021-02-22
Rated 3 out of 5 by from Painted only on one side Nice flashing, but keep in mind it’s only painted on one side so colour may not matter depending on application.
Date published: 2020-08-11
Rated 4 out of 5 by from Bad specs Glad I went to the store to pick this up and did not phone in the order. The specifications are WRONG. This is not 2"x2"x10". It is 2"x2"x10 feet.
Date published: 2011-09-27
Rated 5 out of 5 by from Great drip edge Good product for a reasonable price. Makes a great drop edge.
Date published: 2020-08-05
Rated 5 out of 5 by from Great! Easy to install and gives a great over hang into gutters.
Date published: 2019-11-05
Rated 4 out of 5 by from Well made and sturdy flashing Well made and sturdy flashing. Easy to trim to size.
Date published: 2020-08-06
  • y_2023, m_11, d_27, h_7
  • bvseo_bulk, prod_bvrr, vn_bulk_3.0.37
  • cp_1, bvpage1
  • co_hasreviews, tv_43, tr_14
  • loc_en_CA, sid_1000109769, prod, sort_[SortEntry(order=RELEVANCE, direction=DESCENDING)]
  • clientName_homedepot-canada
  • bvseo_sdk, java_sdk, bvseo-4.0.0
  • CLOUD, getReviews, 50ms
  • REVIEWS, PRODUCT

How long is this flashing?

Asked by: flipflops
120”
Answered by: CHolmes
Date published: 2021-05-26

Can I use this for deck ledger flashing on a brick veneer wall? I'm using a 2x10 Pressure Treated Lumber for my deck ledger.

Asked by: Deck2do
Hi there, and thanks for your question. Depending on the type of PT lumber you are using we would recommend a membrane between this flashing and the ledger. There is also a deck flashing available under Model # 8560 Store SKU # 1000163401, and again we would recommend using a membrane between the flashing and the PT lumber. Thank you!
Answered by: Product Expert
Date published: 2020-10-09

Is this able to be cut? And if so what would you recommend 

Asked by: ShellEy
Yes, we cut it. My husband used tin snips.
Answered by: LisaM
Date published: 2022-11-16

How long of a piece is it?

Asked by: shannon
10 foot long
Answered by: Elsauv
Date published: 2022-11-21

Are both sides brown?

Asked by: Vahsta
No. The outside of the angle is white.
Answered by: John B
Date published: 2023-07-19

Hi! I need to install some type of water protection for the bottom of the windows of my building. I'm thinking or purchasing these, and cutting it to fit with the window and, folding it on the sides and the bottom, to then add some scellant. Thoughts?

Asked by: Frank
Yes this will work but ensure when installed it slopes away from the window to prevent pooling. Seal with a quality exterior-grade silicone. If you have ability, add a drip-edge by bending the bottom edge up about 20- 45 degrees to keep water from running down wall.
Answered by: mygo2guy
Date published: 2023-03-28

Is it white on both sides? The one I got curbside was white on one side and brown on the other.

Asked by: Cheribo
Hello Cheribo, thank you for your question. The White Galavized Flashing angle is white on one side and brown on the other.
Answered by: Product Expert
Date published: 2021-05-20

how long is the drip edge? It's just one piece of drip edge? I'm trying to get the linear coverage to know how much to order. (My job requires 77ft of drip edge, so I have to know the length of each one).

Asked by: Harold
Hi Harold, and thanks for your question. Each flashing is 10 feet. Thank you!
Answered by: Product Expert
Date published: 2020-06-18
  • y_2023, m_11, d_27, h_7CST
  • bvseo_bulk, prod_bvqa, vn_bulk_3.0.37
  • cp_1, bvpage1
  • co_hasquestionsanswers, tq_25
  • loc_en_CA, sid_1000109769, prod, sort_[SortEntry(order=NUM_ANSWERS, direction=DESCENDING)]
  • clientName_homedepot-canada
  • bvseo_sdk, java_sdk, bvseo-4.0.0
  • CLOUD, getContent, 125ms
  • QUESTIONS, PRODUCT