Pro Spring Black Friday event is on now. Don't wait!  Shop Now

Overview

Model # QWARM3X10F240 Store SKU # 1001611789

A gentle electric radiant heat system designed specifically for dry installation under floating wood and laminate floors. A low profile, line voltage system, it features gradual warmth from low wattage resistance heating of ultra-thin, flexible radiant heat film. Installed easily over a subfloor or over an acoustic/insulating underlayment as part of the overall floor assembly, it uses just 12-Watt per square foot to gently raise the temperature of the floor, conforming to the warranty requirements of many floating floors. The system, which sports an impressive 99% efficiency, includes temperature limiting properties so the film does not overheat. Its available in four convenient rollout mat sizes that will accommodate most any layout. Each mat has wires pre-attached for ease of installation.

  1. Use with most floating laminate, engineered wood and floating tile floors
  1. Easy to install: roll out, cut length to fit if needed and run pre-attached wires to a wall thermostat
  1. Maintenance free, crafted to not completely shut down if the system should ever become compromised or damaged
  1. Will not add extra height to the floor, only 0.016 in. thick
  1. Disperses an evenly consistent heat throughout the entire floor
  1. Adjust temperature with quiet warmth thermostat (sold separately)

Specifications

Dimensions

Assembled Depth (in inches)
120
Assembled Height (in inches)
0.016
Assembled Weight (in lbs)
0.5
Assembled Width (in inches)
36
Packaged Depth (in inches)
4.5
Packaged Height (in inches)
38
Packaged Weight (In lbs)
4.5
Packaged Width (in inches)
4.5

Details

Country of Origin
US-United States
For Use With
Engineered Hardwood, Cork, Laminate Flooring, Bamboo
Material
Plastic

Warranty / Certifications

25 Year Limited Warranty
3 ft. x 10 ft. 240V Floor Heating System for Laminate, Vinyl, and Floating Floors (30 sq. ft.)QuietWarmth 3 ft. x 10 ft. 240V Floor Heating System for Laminate, Vinyl, and Floating Floors (30 sq. ft.)A gentle electric radiant heat system designed specifically for dry installation under floating wood and laminate floors. A low profile, line voltage system, it features gradual warmth from low wattage resistance heating of ultra-thin, flexible radiant heat film. Installed easily over a subfloor or over an acoustic/insulating underlayment as part of the overall floor assembly, it uses just 12-Watt per square foot to gently raise the temperature of the floor, conforming to the warranty requirements of many floating floors. The system, which sports an impressive 99% efficiency, includes temperature limiting properties so the film does not overheat. Its available in four convenient rollout mat sizes that will accommodate most any layout. Each mat has wires pre-attached for ease of installation.
QuietWarmth
1001611789
CAD2982024-04-23
The Home Depot Canada
3 ft. x 10 ft. 240V Floor Heating System for Laminate, Vinyl, and Floating Floors (30 sq. ft.) is rated 4.6 out of 5 by 37.
  • y_2024, m_4, d_20, h_4
  • bvseo_bulk, prod_bvrr, vn_bulk_3.0.41
  • cp_1, bvpage1
  • co_hasreviews, tv_4, tr_33
  • loc_en_CA, sid_1001611789, prod, sort_[SortEntry(order=RELEVANCE, direction=DESCENDING)]
  • clientName_homedepot-canada
  • bvseo_sdk, java_sdk, bvseo-4.0.0
  • CLOUD, getAggregateRating, 79ms
  • REVIEWS, PRODUCT
Rated 4 out of 5 by from Happy with the product so far Definitely will not heat the room but does make a nice warm surface to walk on. I used this underneath laminate flooring. (Thermostat is expensive)
Date published: 2021-04-15
Rated 5 out of 5 by from Under vinyl plank heating This was a great product. My electrician had no trouble installing it.
Date published: 2022-08-11
Rated 5 out of 5 by from By far the easiest, no mess installation Excellent for dry areas. Not recommended for wet zones.
Date published: 2021-02-21
  • y_2024, m_4, d_20, h_4
  • bvseo_bulk, prod_bvrr, vn_bulk_3.0.41
  • cp_1, bvpage1
  • co_hasreviews, tv_4, tr_33
  • loc_en_CA, sid_1001611789, prod, sort_[SortEntry(order=RELEVANCE, direction=DESCENDING)]
  • clientName_homedepot-canada
  • bvseo_sdk, java_sdk, bvseo-4.0.0
  • CLOUD, getReviews, 22ms
  • REVIEWS, PRODUCT

Can I connect 4 heating pads 3ft x 10 ft 220v to the one thermostat in parallel. Do I need a floor sensor for each pad. Thanks

Asked by: Geoff
I had four pads as well, Ran them all separately to the thermostat and used only one censor and it works fine
Answered by: Greg
Date published: 2022-05-28

How hot does this get? Can I just use a dedicated switch instead of a thermostat? Pretty much wanting to know the standard temp it would be without having a thermostat and is it safe to just switch on (wont get crazy hot)? Thanks

Asked by: Bran
These require a thermostat
Answered by: TAMMY
Date published: 2023-01-28

can this be used in a bathroom under snap together vinyl plank flooring Just wondering about possible water penetration.

Asked by: Todd
I love this product and I put them under vinyl planks in a  kitchen. The only thing I would not recommend is: vinyl planks. Joints are a bit weak, especially when heated. I also made a big big mistake by putting two layers of subfloor to fill a gap of height, it’s really not helping stability. I used those film a lot, best is under wood or tiles.
Answered by: Matt
Date published: 2023-02-21

Can you put a kitchen sink mat over top the floor with heating mat beneath 

Asked by: Suesec
Thank you for reaching out. We do not recommend the use of area rugs over the heating system. This could create a situation where the trapped heat has an adverse effect on your flooring.
Answered by: MP Global
Date published: 2023-05-02

Can I install QuiteWarmth directly on Dricore Subfloor 23.25" x 47.25" x 1" Insul-Armor Premium Subfloor skipping QuiteWalk underlayment? The configuration would be as follows (from bottom to up): Concrete pad + Dricore Subfloor + QuiteWarmth + LVP.

Asked by: ValN
I recommend you put the 1mm underlay , it conceals the wires from the heating mats and will prevent any unevenness.
Answered by: TAMMY
Date published: 2022-09-07

Can it be installed on DMX 1-Step2.0? Configuration as follows: Concrete pad + DMX+QuickWalk Underlayment+ QuickWarmth+LVP

Asked by: ValN
Thank you for reaching out. That will be more of a question for the flooring manufacturer. Providing the DMX product offers a smooth surface that meets our specifications, MP Global has no problems with that. You will need to ensure that the flooring manufacturer is satisfied with DMX as a substrate.
Answered by: MP Global
Date published: 2022-09-07

I want to replace my baseboard heaters which runs on 208v by warming mats. Are the 240v mats compatible with 208v? Anything to be aware of if they are?

Asked by: Remmun
Thank you for reaching out. The 240V mats require a dedicated circuit. If that circuit is less than 240V, the capacity is limited but will function.
Answered by: MP Global
Date published: 2022-06-08
  • y_2024, m_4, d_21, h_5CST
  • bvseo_bulk, prod_bvqa, vn_bulk_3.0.41
  • cp_1, bvpage1
  • co_hasquestionsanswers, tq_52
  • loc_en_CA, sid_1001611789, prod, sort_[SortEntry(order=NUM_ANSWERS, direction=DESCENDING)]
  • clientName_homedepot-canada
  • bvseo_sdk, java_sdk, bvseo-4.0.0
  • CLOUD, getContent, 80ms
  • QUESTIONS, PRODUCT