Maintaining clean, safe stores is one of our top priorities.Learn More
Quikrete Bonded Topping Mix 18kg Bag
Model # 113318|Store SKU # 1000166235
Model # 113318 Store SKU # 1000166235
QUIKRETE Bonded Topping Mix is designed to repair and resurface damaged concrete up to 1/2" in thickness (12.7mm). It can be used for driveways, sidewalks and patios.
90 minute set
Foot traffic in 2.5 hours
Trowels to a feather finish
Only available in Western Canada and Thunder Bay
Assembled Depth (in inches)
Assembled Height (in inches)
Assembled Weight (in lbs)
Assembled Width (in inches)
Packaged Depth (in inches)
Packaged Height (in inches)
Packaged Weight (In lbs)
Packaged Width (in inches)
Country of Origin
Warranty / Certifications
The QUIKRETE<sup>.</sup> Companies, Inc. warrant this product to be of merchantable quality. This product is not warranted as suitable for any purpose or use other than the general purpose for which it is intended. Liability under this warranty is LIMITED to the replacement of its product (as purchased) if found to be defective. For more information please contact customer service at 404-634-9100.
QUIKRETE Concrete Acrylic Fortifier is an acrylic ... See More +
QUIKRETE Concrete Acrylic Fortifier is an acrylic additive for concrete and masonry to enhance bonding and water resistance. It can be used for concrete repairs, resurfacing concrete, stucco walls, thinnest and tile grout.
Rated 5 out of
Ed from Winnipeg from
Been Using for Over 30 YearsThis product is not new to me. Always good results and the mixed in adhesive is a bonus. I have areas over 30 years old that are still holding. The small pail is sometimes all you need, but the large bag is extremely good value if you have room to store it.
I have salt pock marks on my driveway. Is this the correct product to use to fix them?
Asked by: Elskin
QUIKRETE® Bonded Topping Mix can be used to fill spalls, cracks and pits in concrete up to 12mm (1/2”) thick per layer. For repairs thicker than 12mm, repairs should be done in multiple layers, waiting 24 hours between layers.