RAIN BIRD 1/4" x 100' Drip Tubing

Model # A50799|Store SKU # 1001493602

Overview

Model # A50799 Store SKU # 1001493602

1/4 in. O.D. exterior grade tubing for use in positioning spot watering emitters and other drip irrigation devices around plants. Connect with Rain Bird 1/4 in. barbed fittings and stakes. 100 foot coil that can be cut to needed lengths to water plants.

Great for drip and micro irrigation

Use with 1/4 in. barbed fittings and stakes

For use with spot watering emitters and other drip irrigation devices

70 psi pressure rating

Manual

Rain Bird - Installation Guide-pdf.pdf

The Home Depot will provide an accessible format of PDFs upon request. Please contact us at
1-800-628-0525.

Specifications

Emitter tubing

Tubing Length (ft.)

100

Diameter

1/4

Dimensions

Assembled Depth (in inches): 7.95
Assembled Height (in inches): 3.6
Assembled Weight (in lbs): 1.15
Assembled Width (in inches): 7.0
Packaged Depth (in inches): 7
Packaged Height (in inches): 3.25
Packaged Weight (In lbs): 1.15
Packaged Width (in inches): 7

Details

Diameter: 1/4
Emitter tubing: No
Tubing Length (ft.): 100

Warranty / Certifications

If a purchaser of any new Rain Bird consumer product becomes dissatisfied with it for any reason then they may return it to the retailer where it was purchased within a reasonable time for a full refund

Related Products

RAIN BIRD 9-Port Drip Manifold

Providing full adjustability of each port, this drip irrigation manifold will allow you to customize flow from 0 to 20 GPH for individual plants, improving root development and reducing plant stress. The manifold has 9 ports which accept standard ¼ in. drip tubing. Each port adjusts with a side lever to increase, decrease or shut off flow. The manifold mounts to a standard ½ MPT riser.

View Details

RAIN BIRD Rain Bird Drip Irrigation 1/2-inch Blank Distribution Tubing

Rain Bird Drip Irrigation 1/2 in. Blank Distribution Tubing (0.7" OD) is used to run water from an outside faucet or other water source to the planting area. Kink resistant materials help provide dependable water flow. Connect tubing sections and 1/2 in. Drip Tubing with Rain Bird 1/2 in. barbed or compression fittings. To place watering devices near plants, add 1/4 in. tubing runs by tapping into the side of this 1/2 in. tubing with 1/4 in. barbed couplings or drippers. Professional-grade features include extra flexibility for kink-free installation, plus unmatched resistance to chemicals, algae growth and UV damage. Tubing is easy to unroll and stake in gardens, flower beds, ground cover or other landscaped areas. Industry leading flexibility allows tighter turns with fewer elbows for fast, easy installation. Perfect for small, narrow and tight planting areas, as well as areas with tight curves or many switchbacks. Designed for underground or above-ground installation.

View Details

RAIN BIRD 1/2" x 250' Emitter Tubing with 12" Spacing

Designed for multi-season use, this rugged Rain Bird 1/2 in. emitter tubing provides dependable, uniform watering of vegetable plants, ground cover, flowers and other closely spaced plants. With 0.9 gph (gallons per hour) built-in emitters spaced every 12 inches, the tubing waters evenly from beginning to end of its layout in your planting area. Just cut, place and connect in any arrangement using Rain Bird 1/2 in. barbed or easy-fit compression fittings and stakes (purchased separately). The emitters are designed for clog-resistant flow. Other professional grade quality features include extra flexibility for kink-free installation, plus unmatched resistance to chemicals, algae growth and UV damage.

View Details

Dripmaster 1/2 Inch (.700) X 100 Feet Dist Tubing

Use to distribute water to drippers, misters, and low volume sprinkles. Compatible with most drip irrigation systems.

View Details