Red Head 1/2-inch x 6-inch Foundation Bolt with Nut and Washer - 10 Pack

Model # 620573|Store SKU # 1001072713

Overview

Model # 620573 Store SKU # 1001072713

Objects or structures may be connected to concrete using this 6 in. Galvanized Metal Anchor Bolt with Nut and Washer. The bolt is ideal for connecting a concrete foundation to a wall to improve its strength.

Used to attach objects and structures to concrete or to connect a concrete foundation to a wall for improved foundation strength

Includes pre-threaded nut and washer

Can be used to connect the concrete foundation of a building to its wall to make the building more resistant to earthquakes

Manual

The Home Depot will provide an accessible format of PDFs upon request. Please contact us at
1-800-628-0525.

Specifications

Dimensions

Assembled Depth (in inches): 0.5
Assembled Height (in inches): 6.0
Assembled Weight (in lbs): 0.42
Assembled Width (in inches): 0.5
Packaged Depth (in inches): 10.5
Packaged Height (in inches): 3.15
Packaged Weight (In lbs): 3.92
Packaged Width (in inches): 6.88

Details

Bolt Diameter (In.): 0.5
Finish: Black
Head Style: Round
Length (in.): 8
Material: Metal
Package Quantity: 10
Plating
Product Finish/Material: Black
Product Length: 6 in.

Warranty / Certifications

For more information please contact customer service at 1-800-628-0525

Related Products

Paulin 1/2-inch x 6-inch Pro Pack Hot Dipped Galvanized Hex Lag Bolts (5 Sets)

Save time with Paulins new Hex Lag Bolt Pro Pack. Each bag contains: 1/2x6 Hex Head Lag Bolt (5), 1/2 Plain Steel Washer (5). Hot-dipped galvanized finish.

View Details

Red Head 1/2-inch x 6-inch Foundation Bolts With Nuts and Washers

Used for anchoring such things as wood stud walls in pre-poured concrete. Leg of bolt is firmly embedded in concrete after it cures, allowing for clamping on the threaded portion of the bolt. Available in 1/2 x 6 and 1/2 x 8 with nut and washer

View Details

Paulin 1/2 x 8-inch Carriage Bolt - Zinc Plated - Grade 2 - UNC

Carriage Bolts are used in wood or metal to wood applications with a domed top and a square under the head. This pulls into the wood as the nut is tightened. When using carriage bolts always use a flat washer between the wood and hex nut to eliminate pull-through of the nut in the wood. Drill pilot hole slightly larger than body diameter of bolt. Insert the carriage bolt so the headed end is on finished side of project for appearance or safety. Length is measured from under head to end of bolt. Steel is zinc plated for moderate protection against rust. Use hot dipped galvanized finish or stainless steel where corrorsion and rust is of concern or for exterior projects.

View Details

Simpson Strong-Tie RFB 1/2 inch x 5 inch Hot-Dip Galvanized Retrofit Bolt

RFBs are clean, oil-free, pre-cut threaded rod, supplied with nut and washer. Offers a complete engineered anchoring system when used with Simpson Strong-Tie adhesive. Inspection is easy; the head is stamped with rod length and "No Equal" symbol for identification after installation.

View Details