Model # 00823|Store SKU # 1000858215
LB1236 is a 1.35 mm self-adhesive waterproofing membrane made of elastomeric SBS bitumen with a glass mat reinforcement. The surface is sanded and the underface is composed of a silicone film easily detachable in two parts.
The RoofGuard ® Roof & Gutter Cable from Waterline has been designed for the sole purpose of preventing the formation of ice dams on pitched roofs with tab shingles . The RoofGuard ® Roof & Gutter Cable can be used on either metal or plastic gutters.
Cable has been designed for the sole purpose of preventing the formation of ice dams on pitched roofs with tab shingles . Can be used on either metal or plastic gutters.
This product was specifically developed for professional roofers. With a higher concentration of high- quality bitumen, it seals roof elements, such as flashings, vents or upstands, and it repairs various joints, holes and cracks, built-up roofs, etc.
Adhesive membrane roofing underlayment consisting of a reinforced glass mat and sand covered surface which is slip resistant. Installation: If conditions require, prepare the substrate with EXTERIOR PRIMER or HO PRIMER. Position the membrane parallel to the roof edge while leaving about 8 cm at the front where the gutter will be installed. Fold the sheet over itself, by half of its width, or 50 cm over the whole length already positioned. It is recommended to kneel on the unfolded portion of the membrane to keep it in place during this operation. Remove the protective film from the folded section while placing the membrane on the support. The self-adhesive portion will adhere to the support. Then take the other side of the membrane and repeat the previous two steps. Immediately apply pressure on the membrane using a heavy metal roller or a hard rubber roller to ensure adhesion between the support and the membrane and avoid forming bulges, folds or gaps. Note:
