• Cart
  • NOBODY BEATS OUR PRICES. GUARANTEED.Terms & Conditions

    Rheem Water Heater Anode Rod

    Model # AP11526Y-2|Store SKU # 1000150837|Special Order SKU # 1001004344

    Overview
    Specifications
    Reviews

    Overview

    Model # AP11526Y-2 Store SKU # 1000150837

    The Rheem Water Heater Anode Rod helps prolong the life of your water heater by attracting impurities in the water. The rod corrodes instead of your water heater tank. The rod should be inspected and replaced every couple of years.

    1. 34-3/8 inch Length
    1. 9 inch Magnesium constructed rod
    1. 3/4" NPT fitting - HEX head
    1. Helps prolong the life of your water heater by protecting against corrosion
    1. Fits most brands
    1. 3/4 in. NPT fitting

    Specifications

    Dimensions

    Assembled Depth (in inches)
    2
    Assembled Height (in inches)
    34
    Assembled Weight (in lbs)
    2
    Assembled Width (in inches)
    2
    Packaged Depth (in inches)
    2
    Packaged Height (in inches)
    34
    Packaged Weight (In lbs)
    2
    Packaged Width (in inches)
    2

    Details

    Certified
    Yes
    Country of Origin
    CA-Canada

    Warranty / Certifications

    1 Year Warranty
    Water Heater Anode RodPhoto of productThe Rheem Water Heater Anode Rod helps prolong the life of your water heater by attracting impurities in the water. The rod corrodes instead of your water heater tank. The rod should be inspected and replaced every couple of years.
    Rheem
    1000150837
    CAD23.5
    The Home Depot Canada
    Water Heater Anode Rod is rated 3.9 out of 5 by 8.
    • y_2019, m_10, d_17, h_21
    • bvseo_bulk, prod_bvrr, vn_bulk_2.0.13
    • cp_1, bvpage1
    • co_hasreviews, tv_0, tr_8
    • loc_en_CA, sid_1000150837, prod, sort_[SortEntry(order=SUBMISSION_TIME, direction=DESCENDING)]
    • clientName_homedepot-canada
    • bvseo_sdk, java_sdk, bvseo-4.0.0
    • CLOUD, getAggregateRating, 147ms
    • REVIEWS, PRODUCT
    Rated 4 out of 5 by from Too long for my water heater, but just cut it by a wood saw. Not a problem. However, spent abt 1... Too long for my water heater, but just cut it by a wood saw. Not a problem. However, spent abt 1 hrs to get rid of sticker residual ! Googled and found nice way to get rid of residue using tape. Otherwise, no complain.
    Date published: 2019-02-09
    Rated 1 out of 5 by from 1 Star Review Rating provided by a verified purchaser
    Date published: 2019-02-07
    Rated 5 out of 5 by from Fit perfect. Good quality at a reasonable price Fit perfect. Good quality at a reasonable price
    Date published: 2018-12-13
    Rated 5 out of 5 by from This has been installed for a little over 3 weeks. So far, everything is good. My hot water wou... This has been installed for a little over 3 weeks. So far, everything is good. My hot water would start to smell at about 4 weeks. Time will tell if this resolved the smell problem.
    Date published: 2018-10-16
    Rated 4 out of 5 by from Great price!... Great price!
    Date published: 2018-08-30
    Rated 5 out of 5 by from works well... works well
    Date published: 2018-02-13
    Rated 4 out of 5 by from So far, so good! Make sure to measure your space above where the old rod is to be removed. We had to cut ours shorter. No big deal though.
    Date published: 2017-05-23
    Rated 3 out of 5 by from Very badly described item! This is NOT a 42" product as described. If you type the model # AP11526Y-1 into a search engine you will find that it is described as 0.90" in diameter vs 34.375 inches in length. In addition, it is Magnesium, not aluminum. The one I bought from Home Depot was actually only about 34.1" in length. On the bright side, it is the correct anode for a typical hot water heater.
    Date published: 2016-07-06
    • y_2019, m_10, d_17, h_21
    • bvseo_bulk, prod_bvrr, vn_bulk_2.0.13
    • cp_1, bvpage1
    • co_hasreviews, tv_0, tr_8
    • loc_en_CA, sid_1000150837, prod, sort_[SortEntry(order=SUBMISSION_TIME, direction=DESCENDING)]
    • clientName_homedepot-canada
    • bvseo_sdk, java_sdk, bvseo-4.0.0
    • CLOUD, getReviews, 40ms
    • REVIEWS, PRODUCT

    what size of socket is required to tighten the rod into the water heater?

    Asked by: JonRock
    You'll need a 1 1/16"
    Answered by: JWWS
    Date published: 2019-01-27
    • y_2019, m_10, d_17, h_21CST
    • bvseo_bulk, prod_bvqa, vn_bulk_2.0.13
    • cp_1, bvpage1
    • co_hasquestionsanswers, tq_1
    • loc_en_CA, sid_1000150837, prod, sort_[SortEntry(order=LAST_APPROVED_ANSWER_SUBMISSION_TIME, direction=DESCENDING)]
    • clientName_homedepot-canada
    • bvseo_sdk, java_sdk, bvseo-4.0.0
    • CLOUD, getContent, 66ms
    • QUESTIONS, PRODUCT
    <?xml version="1.0" encoding="utf-8"?>