• Cart
  • NOBODY BEATS OUR PRICES GUARANTEED.Terms & Conditions

    RIDGID 6 Amp 6-1/8-inch Corded Jointer/Planer

    Model # JP0610|Store SKU # 1000405795

    Overview

    Model # JP0610 Store SKU # 1000405795

    Take your woodworking to the next level with this RIDGID 6 Amp 6-1/8 inch Corded Jointer/Planer. Durably made, it features a heavy duty induction motor that is totally enclosed to help prevent sawdust contamination. Considerably quiet for its 1 HP motor, it makes smooth cuts safely with the assist of a blade guard and push blocks. Its versatile dual-bevel fence features stops at 45, 90 and 135 degrees. The tool sits atop a rugged, wide-stance cabinet with on-board storage for blade-alignment tools and accessories. A long, handy, 45 inch tabletop gives greater support to large pieces.

    1. 6-1/8-Inch maximum cutting width
    1. 1 HP, 3450 RPM, heavy duty induction motor operates at 120 volts or 240 volts
    1. Dual bevel fence with stops at 45°, 90° and 135°
    1. Machine-ground surfaces for precise jointing/planning
    1. Easy-to-assemble with a rugged cast-iron base to minimize vibration
    1. Lifetime Service Agreement: Free parts and service for life with registration
    1. Includes: (1) 6Amp 6 1/8-Inch Jointer/Planer

    Specifications

    Dimensions

    Assembled Depth (in inches)
    55.5
    Assembled Height (in inches)
    16.25
    Assembled Weight (in lbs)
    227
    Assembled Width (in inches)
    22.5
    Packaged Depth (in inches)
    55.5
    Packaged Height (in inches)
    16.25
    Packaged Weight (In lbs)
    227
    Packaged Width (in inches)
    22.5

    Details

    Amps
    6
    Batteries Included
    No
    Battery Amp Hours
    6
    Blade Diameter (In.)
    6.125
    Certified
    Yes
    Cordless/Corded
    Corded
    Country of Origin
    CN-China
    Voltage (volts)
    120

    Warranty / Certifications

    6 Amp 6-1/8-inch Corded Jointer/Planer6 Amp 6-1/8-inch Corded Jointer/PlanerTake your woodworking to the next level with this RIDGID 6 Amp 6-1/8 inch Corded Jointer/Planer. Durably made, it features a heavy duty induction motor that is totally enclosed to help prevent sawdust contamination. Considerably quiet for its 1 HP motor, it makes smooth cuts safely with the assist of a blade guard and push blocks. Its versatile dual-bevel fence features stops at 45, 90 and 135 degrees. The tool sits atop a rugged, wide-stance cabinet with on-board storage for blade-alignment tools and accessories. A long, handy, 45 inch tabletop gives greater support to large pieces.
    RIDGID
    1000405795
    CAD699
    The Home Depot Canada
    6 Amp 6-1/8-inch Corded Jointer/Planer is rated 4.6 out of 5 by 521.
    • y_2020, m_8, d_5, h_16
    • bvseo_bulk, prod_bvrr, vn_bulk_3.0.10
    • cp_1, bvpage1
    • co_hasreviews, tv_23, tr_498
    • loc_en_CA, sid_1000405795, prod, sort_[SortEntry(order=SUBMISSION_TIME, direction=DESCENDING)]
    • clientName_homedepot-canada
    • bvseo_sdk, java_sdk, bvseo-4.0.0
    • CLOUD, getAggregateRating, 127ms
    • REVIEWS, PRODUCT
    Rated 4 out of 5 by from Great value This is a good product and I have made extensive use of it so far. If I have a complaint the dust collection is not great. But the build was straight forward although most likely you will need two people
    Date published: 2020-07-30
    Rated 5 out of 5 by from So far this jointer has been great. Ive used soft... So far this jointer has been great. Ive used soft wood and hard wood and it handled it all well. And everything was pretty much straight upon set up. Very glad to have it.
    Date published: 2020-07-21
    Rated 1 out of 5 by from Rating provided by a verified purchaser... Rating provided by a verified purchaser
    Date published: 2020-07-15
    Rated 5 out of 5 by from Great jointer. Best for the money. This jointer performs great and the price point is the sweet spot for its size and performance. I am also very happy with the quietness of it, too. The assembly was pretty easy but to be safe you really should have a second person help you flip it right-side up after attaching the stand to the infeed/outfeed tables. It's slightly over 200 lbs all assembled. Been running great and I definitely recommend it.
    Date published: 2020-07-06
    Rated 5 out of 5 by from This jointer is excellent, looked Others that were higher priced.... This jointer is excellent, looked Others that were higher priced. I think this is the best one out there for the size
    Date published: 2020-07-01
    Rated 5 out of 5 by from Nice machine, it’s made in Taiwan, I've had it for just about a month. Assembly went well. A word... Nice machine, it’s made in Taiwan, I've had it for just about a month. Assembly went well. A word of caution, review the instructions before removing the cast iron from the box, as they advise setting the in-feed / out-feed casting, on 4 X 4’s; there is a standing roll pin that acts as a stop for the rotating safety guard, so don’t set it down on a flat surface as this roll pin could get damaged. You'll also want a fuller compliment of tools than their suggested list, i.e. sockets, long extensions etc. Once I had it assembled I flipped on the switch and it came right on, curiously I came back a little later and flipped on the switch and it didn’t move, I got a electrical hum as the motor was stuck. Checking the motor turned freely by hand, to resolve the problem I had to adjust the belt tension (loosen) and then got it going – I let it run for several minutes, no problems since. Out of the box I had no problems with flatness or parallelism of the in-feed to out-feed, and once the fence was set to 90, checking with a Brown & Sharp Square it repeats to 90, my test piece was nice and square. You do want a good dust collector, mine is rated at 750 cfm. For the money the jointer it’s a 5 star machine.
    Date published: 2020-06-24
    Rated 5 out of 5 by from Works great, out of the box. I just assembled... Works great, out of the box. I just assembled per instructions, then squared the fence with a precision square and gave it a try. The finish was great and cut square to the fence, great glue joints. Plugged into my dust collector and got most of the chips. Works like my old craftsman jointer but can be connected to the dust collector. Great value for the price.
    Date published: 2020-06-23
    Rated 5 out of 5 by from Arrived early and was everything that I expected. Nice addition to the workshop. Arrived early and was everything that I expected. Nice addition to the workshop.
    Date published: 2020-06-17
    • y_2020, m_8, d_5, h_16
    • bvseo_bulk, prod_bvrr, vn_bulk_3.0.10
    • cp_1, bvpage1
    • co_hasreviews, tv_23, tr_498
    • loc_en_CA, sid_1000405795, prod, sort_[SortEntry(order=SUBMISSION_TIME, direction=DESCENDING)]
    • clientName_homedepot-canada
    • bvseo_sdk, java_sdk, bvseo-4.0.0
    • CLOUD, getReviews, 37ms
    • REVIEWS, PRODUCT

    How long is the bed?

    Asked by: jjcrawf87
    Sorry for the delay I was gone hunting. The full length of the bed is 45 inches and 5/8.
    Answered by: Claude
    Date published: 2019-11-23

    Why is this product no longer available in Canada?

    Asked by: David c
    Hi David, It is available online only to purchase. Thanks, Ridgid Canada
    Answered by: The RIDGID Canada Team
    Date published: 2019-06-04

    How tall in the fence on this unit?

    Asked by: Antoni
    Hi Antoni, The fence height is 4” from in/out feed tables to the top of fence.
    Answered by: The RIDGID Canada Team
    Date published: 2019-12-03

    I purchased a ridget PJ 0610 but did not receive a copy of the warrenty. There was no form for me to fill out as most companies want filled out so they know when the machine was purchased.this machine was purchased from Home Depot in Medicine Hat.

    Asked by: Jimbo
    Hi Jimbo, The warranty is typically provided in the manual, otherwise all warranty information is available on the Ridgid website.
    Answered by: The RIDGID Canada Team
    Date published: 2019-06-04

    This tool is called a "Corded Jointer/Planer". Where is the planer. I have seen other hybrids that the planer is under the jointer bed. I cant find any picture or video showing this, so where exactly is the planer?

    Asked by: cabowabo
    Hi Cabowabo, We, refer to these machines as jointer/planer as they do both actions at once. It flattens a surface or straightens the edge of a piece of stock and changes the thickness of stock It is not to imply the tool can do either independently. Thank you!
    Answered by: The RIDGID Canada Team
    Date published: 2020-04-23

    What is the dust Port Diameter 

    Asked by: Noel
    4”
    Answered by: Therocktm
    Date published: 2019-12-03
    • y_2020, m_8, d_5, h_16CST
    • bvseo_bulk, prod_bvqa, vn_bulk_3.0.10
    • cp_1, bvpage1
    • co_hasquestionsanswers, tq_6
    • loc_en_CA, sid_1000405795, prod, sort_[SortEntry(order=LAST_APPROVED_ANSWER_SUBMISSION_TIME, direction=DESCENDING)]
    • clientName_homedepot-canada
    • bvseo_sdk, java_sdk, bvseo-4.0.0
    • CLOUD, getContent, 74ms
    • QUESTIONS, PRODUCT