Model # 6700542 Store SKU # 1001529278
This 2 to 4-in condensing roof termination extension kit by Rinnai® is made of solid plastic for Rinnai® tankless water heathers.
Supply and Service valve kit for use with a tankless gas water heater installation. Allows you to conveniently flush and delime your tankless unit, prolonging the life of your water heating investment. Built using clean brass which meets the strictest low lead code requirements. Includes hot and cold installation and service valves.
See More +
The Eccotemp 45H Indoor Liquid Propane Tankless Water Heater is one of the most advanced CSA approved indoor models of the Eccotemp tankless line. The included Eccotemp 4" category III, stainless steel, UL listed Horizontal Vent Kit makes installation a breeze. Additional venting may be required based on your installation. The Eccotemp 4" Horizontal Vent Kit Includes a termination hood with backflow preventer, 90-degree elbow, wall thimble, 12" straight pipe, and appliance adapter.Rated at an impressive 6.8 GPM with a temperature rise of 38 degrees and 140,000 BTU per hour, the Eccotemp 45Hi-LP can meet all your hot-water needs! Eccotemp's advanced 0.7 GPM low flow ignition technology allows users to enjoy endless hot water without experiencing cold spots.We recommend the Eccotemp 45Hi-LP for standard size single family homes, apartments, condos, cabins, as well as smaller commercial applications. Using 2-3 hot water applications simultaneously is a breeze with the Eccotemp 45Hi-LP. With our upgraded PCB (Product Control Board) performance and an all-new gas modulating valve, consumers can experience best in class temperature performance with a price anyone can afford. The compact, wall mounted Eccotemp 45Hi-LP has a 110/120-volt UL listed power cord that powers the internal Exhaust Fan, Anti-Freeze Protection, Digital Display and PCB. With its fully automated control system, the Eccotemp 45Hi-LP only pulls about .67 amps during operation, making it an ideal for low energy consumption and efficiency. The Eccotemp 45Hi has been CSA tested and approved for US & Canadian use at elevations up to 2000 feet. Installation and use of the Eccotemp 45Hi above 2000 feet may affect overall product efficiency and performance. Installation and use of the Eccotemp 45Hi above 5000 feet is not recommended.IMPORTANT NOTE: Cannot be used for HYDRONIC SYSTEMS, RECIRCULATING, or FLOOR HEATING.
See More +
The Eccotemp 45H Indoor Natural Gas Tankless Water Heater is one of the most advanced CSA approved indoor models of the Eccotemp tankless line. The included Eccotemp 4" category III, stainless steel, UL listed Horizontal Vent Kit makes installation a breeze. Additional venting may be required based on your installation. The Eccotemp 4" Horizontal Vent Kit Includes a termination hood with backflow preventer, 90-degree elbow, 12" straight pipe, wall thimble, and appliance adapter.Rated at an impressive 6.8 GPM with a temperature rise of 38 degrees and 140,000 BTU per hour, the Eccotemp 45Hi-NG can meet all your hot-water needs! Eccotemp's advanced 0.7 GPM low flow ignition technology allows users to enjoy endless hot water without experiencing cold spots.We recommend the Eccotemp 45Hi-NG for standard size single family homes, apartments, condos, cabins, as well as smaller commercial applications. Using 2-3 hot water applications simultaneously is a breeze with the Eccotemp 45Hi-NG. With our upgraded PCB (Product Control Board) performance and an all new gas modulating valve, consumers can experience best in class temperature performance with a price anyone can afford. The compact, wall mounted Eccotemp 45Hi-NG has a 110/120-volt UL listed power cord that powers the internal Exhaust Fan, Anti-Freeze Protection, Digital Display and PCB. With its fully automated control system, the Eccotemp 45Hi-NG only pulls about .67 amps during operation, making it an ideal for low energy consumption and efficiency. The Eccotemp 45Hi has been CSA tested and approved for US & Canadian use at elevations up to 2000 feet. Installation and use of the Eccotemp 45Hi above 2000 feet may affect overall product efficiency and performance. Installation and use of the Eccotemp 45Hi above 5000 feet is not recommended.IMPORTANT NOTE: Cannot be used for HYDRONIC SYSTEMS, RECIRCULATING, or FLOOR HEATING.
See More +
The Eccotemp EL22 Indoor Natural Gas Tankless Water Heater is one of the most advanced CSA approved indoor models of the Eccotemp tankless line. The included Eccotemp 4" category III, stainless steel, UL listed Horizontal Vent Kit makes installation a breeze. Additional venting may be required based on your installation. The Eccotemp 4" Horizontal Vent Kit Includes a termination hood with backflow preventer, 90-degree elbow, wall thimble, 12" straight pipe and appliance adapter.Rated at an impressive 6.8 GPM with a temperature rise of 38 degrees and 140,000 BTU per hour, the Eccotemp EL22i-NG can meet all your hot-water needs! Eccotemp's advanced 0.7 GPM low flow ignition technology allows users to enjoy endless hot water without experiencing cold spots.We recommend the Eccotemp EL22i-NG for standard size single family homes, apartments, condos, cabins, as well as smaller commercial applications. Using 2-3 hot water applications simultaneously is a breeze with the Eccotemp EL22i-NG. With our upgraded PCB (Product Control Board) performance and an all new gas modulating valve, consumers can experience best in class temperature performance with a price anyone can afford.The compact, wall mounted Eccotemp EL22i-NG has a 110/120-volt UL listed power cord that powers the internal Exhaust Fan, Anti-Freeze Protection, Digital Display and PCB. With its fully automated control system, the Eccotemp EL22i-NG only pulls about .67 amps during operation, making it an ideal for low energy consumption and efficiency. The Eccotemp EL22i has been CSA tested and approved for US & Canadian use at elevations up to 2000 feet. Installation and use of the Eccotemp EL22i above 2000 feet may affect overall product efficiency and performance. Installation and use of the Eccotemp EL22i above 5000 feet is not recommended.IMPORTANT NOTE: Cannot be used for HYDRONIC SYSTEMS, RECIRCULATING, or FLOOR HEATING.
See More +