Model # 3300RB001|Store SKU # 1000478089
OmniGrip Adhesive is a flexible, lightweight, high-polymer adhesive for tile and stone installation. Designed to resist intermittent water exposure and has 33% less shrinkage than traditional adhesives, as well as sag resistance. Ideal for small format for ceramic, mosaic, quarry, pavers, gauged slate, porcelain and gauged stone tile installations on walls, floors or countertops. Recommended for tile up to 12 in. (30.5 cm) on any side. Can be used with tile up to 15 in. (38.1 cm) on any side but dry time significantly increases. For tile with any side greater than 15 in. (38.1 cm) CUSTOM recommends using a polymer modified cement mortar specifically for large format tile.
OmniGrip's unique formula sets a radical new standard, offering many benefits not found in traditional tile adhesives. Formulated with more solids and less water, OmniGrip shrinks up to 33% less than traditional adhesives ensuring maximum coverage and superior bonds. This high-polymer formula remains flexible allowing a wide variety of applications. Excellent for both floor and wall applications. Sets ceramic floor tile up to 16" x 16" (40.6 cm x 40.6 cm) and stone tile on floors up to 12" x 12" (30 cm x 30 cm). It can also be used in exterior wall applications in covered areas. Weighing 25% less than traditional adhesives, OmniGrip applies effortlessly and is easier to carry. Open and adjustment times are in excess of 60 minutes. Offers maximum resistance to prolonged water exposure as defined by ANSI A136.1, Type 1. Protected by MoldGard Technology to resist mould and mildew growth.
ROBERTS 2330 Fiberglass Sheet and Luxury Vinyl Tile Flooring Adhesive is formulated with the desired tack and flexible working time for fiberglass-backed sheet vinyl, luxury vinyl tile and carpet tile. It is pressure sensitive and remains tacky for both permanent or releasable installations. Powered by Microban, this antimicrobial product protection helps fight the growth of stain and odor-causing bacteria that can cause product degradation. This adhesive covers up to 240 sq. ft. per gallon depending on trowel type, substrate and installation conditions. It has an open time of up to 25 minutes for permanent (wet-set) installations, up to 60 minutes for releasable (full tack) installations, working time up to 2 hours, and a 24-hour cure time. It offers a 10-year limited adhesive bond warranty, and a lifetime warranty for installations performed by a Flooring Industry Association Certified Professional. This is a solvent-free adhesive and an environmentally friendly formulation. VOC: < 1 g/L.
ROBERTS 3300 High Performance is a high-solids adhesive formulated for the installation of hard-to-bond commercial carpet and most types of felt-backed, fiber-backed and paper-backed resilient floor coverings. Powered by Microban, this antimicrobial product protection helps fight the growth of stain and odor-causing bacteria that can cause product degradation. This adhesive remains tacky, and has great repositionable characteristics. It covers up to 108 sq. ft. per gallon depending on trowel type, substrate and installation conditions. It has a 30-minute open time, a 60-minute working time, and a 24-hour cure time. It offers a 2-year shelf life from date of production when stored in original unopened container, a 10-year limited adhesive bond warranty, and a lifetime warranty for installations performed by a Flooring Industry Association Certified Professional. This is an environmentally friendly formulation with low odor that is odorless when dry. Recommended for heavy traffic areas. VOC<1 g/L. Made in Canada.
