Due to extremely high order volumes some store pick-up orders may be delayed. Please wait for your “ready for pick-up” email before proceeding to store.  Learn More

Rubbermaid Wall/End Bracket for Wardrobe Shelving

Model # FG3D61LWWHT|Store SKU # 1000131130

Overview

Model # FG3D61LWWHT Store SKU # 1000131130

The Rubbermaid traditional fixed mount system is economical & easy way to install ventilated shelving. The wall bracket mounts to the wall and holds the end of the shelf where it meets the side walls. Provides side wall support

  1. Provides side wall support for of Rubbermaid Wardrobe, Tightmesh or Linen Shelves.
  1. Made of Plastic
  1. White to match wire shelving
  1. Each bag contains one bracket with drive pins

Specifications

Dimensions

Assembled Depth (in inches)
1.25
Assembled Height (in inches)
8.88
Assembled Weight (in lbs)
0.10
Assembled Width (in inches)
7
Packaged Depth (in inches)
1.25
Packaged Height (in inches)
8.88
Packaged Weight (In lbs)
0.1
Packaged Width (in inches)
7

Details

Colour Family
White
Country of Origin
US-United States
Material
Plastic
Product Type
Support Clips and Braces

Warranty / Certifications

1 Year Limited Warranty. See warranty details at www.rubbermaid.com or contact consumer services at 1-866-595-0525.
Wall/End Bracket for Wardrobe ShelvingRubbermaid Wall/End Bracket for Wardrobe ShelvingThe Rubbermaid traditional fixed mount system is economical & easy way to install ventilated shelving. The wall bracket mounts to the wall and holds the end of the shelf where it meets the side walls. Provides side wall support
Rubbermaid
1000131130
Wall/End Bracket for Wardrobe Shelving is rated 4.1 out of 5 by 19.
  • y_2021, m_5, d_15, h_18
  • bvseo_bulk, prod_bvrr, vn_bulk_3.0.15
  • cp_1, bvpage1
  • co_hasreviews, tv_10, tr_9
  • loc_en_CA, sid_1000131130, prod, sort_[SortEntry(order=SUBMISSION_TIME, direction=DESCENDING)]
  • clientName_homedepot-canada
  • bvseo_sdk, java_sdk, bvseo-4.0.0
  • CLOUD, getAggregateRating, 94ms
  • REVIEWS, PRODUCT
Rated 5 out of 5 by from Installled in a flash! Took very little time. Worked perfectly when taken the time to do a good job!
Date published: 2021-04-10
Rated 5 out of 5 by from Limited use shelving Worked well but needs support beneath with any load.
Date published: 2021-03-31
Rated 3 out of 5 by from Shipping was brutal The product is fine, but it took 4 days to get 3 blocks despite the shipping costing 17$ on a 28$ order!
Date published: 2021-02-17
Rated 5 out of 5 by from Pricey but necessary These are pricey for what they are, but very necessary for shelf support. When you need to support and close off the ends there is no better option. We also found them to be cheaper at HD than elsewhere.
Date published: 2021-02-11
Rated 4 out of 5 by from Wall/End Bracket Replaced my old one as it was broken. Nothing special, it worked as it suppose to.
Date published: 2020-08-10
Rated 1 out of 5 by from The Screws are Terrible The screws supplied with these brackets are absolutely unacceptable. You couldn't do this bad of a job without trying. Flat head screws are terrible at the best of times, but the slots in these are so low profile that you can't turn them. If you buy any of this stuff, understand that you will need a hacksaw and cut your own slots in the screws, in order for them to work like screws.
Date published: 2019-04-29
Rated 5 out of 5 by from Great product, easy installation Awesome product, leveled and marked all of my holes and popped everything right in. The longest part of the whole installation was cutting the shelves. As for the other reviewer who was complaining about the screws, LOL, reading instructions is a skill, they aren’t screws they are drive pins.
Date published: 2018-01-10
Rated 1 out of 5 by from Bracket is too deep for proper shelf support The depth of the bracket is greater than the depth of the front lip of the 16" shelf by this same manufacturer. The thinner shelf wire sits on the edge of the bracket whereas the thicker wire should set firmly on the bottom of the bracket. Notice the bracket picture shown for the fast track version, it appears that the thick slide rail rests firmly on the inside bottom of the bracket. I have the standard shelf (and standard bracket), and only a single thin shelf wire is supporting the shelf on the upper inside edge of the bracket. Perhaps the shelf lip width was shortened without doing the same for the bracket? Notching the bracket could make it work, but why is it designed so poorly to begin with? BTW, package directions are also poor. They do not specify the relationship between the shelf height and the height of the holes for the rear or side brackets. They don't even mention the distance between the two anchors on the end bracket. Because the brackets are integral with the wall board anchors, the bracket cannot be pre-positioned to mark where the holes belong.
Date published: 2017-12-31
  • y_2021, m_5, d_15, h_18
  • bvseo_bulk, prod_bvrr, vn_bulk_3.0.15
  • cp_1, bvpage1
  • co_hasreviews, tv_10, tr_9
  • loc_en_CA, sid_1000131130, prod, sort_[SortEntry(order=SUBMISSION_TIME, direction=DESCENDING)]
  • clientName_homedepot-canada
  • bvseo_sdk, java_sdk, bvseo-4.0.0
  • CLOUD, getReviews, 80ms
  • REVIEWS, PRODUCT
  • bvseo_sdk, java_sdk, bvseo-4.0.0
  • CLOUD, getContent, 58ms
  • QUESTIONS, PRODUCT
  • bvseo-msg: The resource to the URL or file is currently unavailable.;