Refresh for Less is on now. Don't wait!  Shop event.

Overview

Model # RTS08 Store SKU # 1001464923

RYOBI introduces the 13 Amp 8-1/4 -inch Table Saw. This table saw is lightweight and easy to use, making it a great addition to any tool collection. Powered by a 13 Amp motor, it can generate up to 5600 RPM for powerful cutting and the 25 -inch x 17 -inch table provides support for large ripping operations. The saw also features an adjustable miter gauge for accurate cross cutting. Backed by the RYOBI 3-Year Manufacturer's Warranty, the 13 Amp 8-1/4 -inch Table Saw includes an 8-1/4 -inch blade, blade wrenches, a hex key, anti-kickback pawls, a blade guard assembly, a push stick, a miter gauge, a rip fence, and an operator's manual.

  1. Tough, 13 Amp motor delivers 5600 RPM for powerful performance
  1. Rip fence easily guides material during rip cuts
  1. Lightweight design for easy transport
  1. Large on/off switch for accessibility and visibility
  1. Adjustable miter gauge for accurate cross cuts
  1. Rack and pinion blade height adjustment provides accurate depth control
  1. 8-1/4 in. Blade for a variety of cuts
  1. Table-mounted push stick storage
  1. Includes: (1) RTS08 13 Amp 8-1/4 -inch Table Saw, (1) 8-1/4 -inch blade, blade wrenches, (1) hex key, anti-kickback pawls, blade guard assembly, (1) push stick, (1) miter gauge, (1) rip fence, and operator's manual

Specifications


Blade Diameter (In.)

8.25


Battery Amp Hours

0


Cordless/Corded

Corded


Batteries Included

No


Saw Features

Lock On Switch, Depth Adjustment, Blade Guard System


Cuts Through

Wood

Dimensions

Assembled Depth (in inches)
28
Assembled Height (in inches)
12.625
Assembled Weight (in lbs)
50.4
Assembled Width (in inches)
20.25
Packaged Depth (in inches)
28
Packaged Height (in inches)
12.62
Packaged Weight (In lbs)
41.5
Packaged Width (in inches)
20.25

Details

Amps
13
Batteries Included
No
Battery Amp Hours
0
Battery Power Type
Lithium Ion
Blade Diameter (In.)
8.25
Blade location
Center
Chuck Type
Hex
Cordless/Corded
Corded
Country of Origin
O-Other
Cuts Through
Wood
Handheld or Stationary
Stationary
Included Accessories
Blades, Rip Fence
Laser Guide
No
Motor
Brushed
Number of Batteries Included
0
Number of Speeds
1
Power Tool Type
Table Saws
Saw Features
Lock On Switch, Depth Adjustment, Blade Guard System
Variable Speed
No
Voltage (volts)
120

Warranty / Certifications

3 years limited warranty. For more information, contact 1-800-525-2579
13 Amp 8-1/4 -inch Table SawRYOBI 13 Amp 8-1/4 -inch Table SawRYOBI introduces the 13 Amp 8-1/4 -inch Table Saw. This table saw is lightweight and easy to use, making it a great addition to any tool collection. Powered by a 13 Amp motor, it can generate up to 5600 RPM for powerful cutting and the 25 -inch x 17 -inch table provides support for large ripping operations. The saw also features an adjustable miter gauge for accurate cross cutting. Backed by the RYOBI 3-Year Manufacturer's Warranty, the 13 Amp 8-1/4 -inch Table Saw includes an 8-1/4 -inch blade, blade wrenches, a hex key, anti-kickback pawls, a blade guard assembly, a push stick, a miter gauge, a rip fence, and an operator's manual.
RYOBI
1001464923
CAD1982024-02-28
The Home Depot Canada
13 Amp 8-1/4 -inch Table Saw is rated 4.4 out of 5 by 1853.
  • y_2024, m_2, d_27, h_9
  • bvseo_bulk, prod_bvrr, vn_bulk_3.0.38
  • cp_1, bvpage1
  • co_hasreviews, tv_365, tr_1488
  • loc_en_CA, sid_1001464923, prod, sort_[SortEntry(order=RELEVANCE, direction=DESCENDING)]
  • clientName_homedepot-canada
  • bvseo_sdk, java_sdk, bvseo-4.0.0
  • CLOUD, getAggregateRating, 74ms
  • REVIEWS, PRODUCT
Rated 3 out of 5 by from Broke within the first Hour of use I brought the saw home, read the manual, set it up and realized it was missing pieces for the handle that needs to be assembled. I was still able to go about using it, so I did for about 45 minutes. I was ripping a piece of wood about 1/2” thick and there was a knot and the wood broke, it then got caught by the blade under the throat plate and broke the throat plate. If you look up anywhere the model for this saw, it will be very hard to find. Even on the Ryobi website, it can’t get a result for RTS08 which is the model. Also trying to replace that piece seems impossible. It seemed to cut fine and work well until that happened.
Date published: 2020-05-08
Rated 2 out of 5 by from He couldn't wait any longer for its value. Good saw for the builder, but not for cabinetmakers; I checked 3 units and they all had a curve in the center, with this defect you will never get a perfect cut in small furniture details, I regret not having reviewed mine in time, I used it after 8 months of buying, this defect forces me to sell this small saw, but if you build or remodel houses this can be an obsession, even if you take into account that it is 13amp and if it is short of power for some demanding cuts.another thing is the fabric that is so that the wood dust does not go out to the motor, it is useless, it is rigid and in the first move to the angle of 45 ° it broke.
Date published: 2021-04-21
Rated 5 out of 5 by from Great value for a DIY person Great table saw for the homeowner, not heavy duty but the price will indicate that....you usually get what you pay for, but in this case the DIY person gets great value. It cuts well but don’t try to push it too hard, let it do it’s thing and and you will find that it’s a very capable addition to you tool collection. It’s light weight makes it easy to use, move around and store. Highly recommend this table saw...5 stars
Date published: 2020-05-14
Rated 1 out of 5 by from pointless I don't see the point of having a table saw that has so little precision. Sure it is cheap, but the results I got were so bad that it would be possible to have better results with a circular saw, without having to deal with the safety issues of a table saw! So, for a list of problems: - There's just one single mitre groove! - The only mitre groove is a proprietary size! Nothing will fit there, neither a T-slot accessory or a regular groove accessory, like a store bought featherboard - So the manual suggestions to use a featherboard are to clamp them on the table. But the bottom of the table is VERY irregular, making it really hard to clamp anything where you actually need it. Also, the rip fence is pretty small, so you will have a real hard time to attach a featherboard there to press the wood down - It's A LOT of work on the user's side to ensure the rip fence is parallel to the blade With a terrible rip fence and a super hard experience to set a featherboard, you are inviting kickbacks. For a minor issue I could live with on a table saw, I'd also say the lack of a soft start is very annoying. So bottom line is sure, it's nice to be able to buy a cheaper saw, but what's the point of having a table saw that is so hard to use in a safe way? A circular saw plus a few jigs would allow you to do all this table does, for a similar price and in a much more safe way.
Date published: 2021-07-15
Rated 3 out of 5 by from Decent for rough work Got this to do cut up some leftover lumber I had, worked with no problems. Later I tried to use it to do some work requiring more precise cuts, and couldn't get the angles to match up, and after days of fiddling and adjusting I noticed severe bowing in the saw top. I wasn't sure if this was a defect or within norm so I contacted Ryobi, no reply over half a year later. Overall I'd say it's decent for rough DIY work, but if you're looking to make nicer furniture look for a saw with a cast iron top, not one with sheet metal like this one.
Date published: 2021-01-30
Rated 4 out of 5 by from Good table saw I am DIY senior. It was easy to set up. Used it and found to function well and decently accurate.The advice on safety features is very useful. Though there is a vaccum exracting outlet for saw dust , I found there is still dust getting scattered from underneath, may be a better extractor is needed. I am happy with this item and can recommend to anyone (I found this item to be more useful to me than the 12" massive mitresaw received as a gift)
Date published: 2021-03-15
Rated 1 out of 5 by from Frustrating experience This saw was very frustrating to work with. The rip fence does not level itself and you have to manually use a level or some other tool to make sure that your cut is straight. I realized this too late and half my project was always off by a couple of mm. The saw blade stared smoking and burning material after 2 weeks of light use. The mitre gauge was also very short for using effectively. I would return this product but it is used, and I know that the customer service will be very difficult to deal with. Will avoid Ryobi products in the future due to this experience.
Date published: 2023-08-08
Rated 4 out of 5 by from Generally it is a good saw. Generally it is a good saw. However the quality of a miter gauge is awful, and miter gauge track is very loose, just like other people noted. Also keep in mind that the miter gauge track is on one side of the table only, unlike some other models, where they are on both sides of the blade.
Date published: 2021-01-30
  • y_2024, m_2, d_27, h_9
  • bvseo_bulk, prod_bvrr, vn_bulk_3.0.38
  • cp_1, bvpage1
  • co_hasreviews, tv_365, tr_1488
  • loc_en_CA, sid_1001464923, prod, sort_[SortEntry(order=RELEVANCE, direction=DESCENDING)]
  • clientName_homedepot-canada
  • bvseo_sdk, java_sdk, bvseo-4.0.0
  • CLOUD, getReviews, 24ms
  • REVIEWS, PRODUCT

With such a small surface area I assume you need a couple people if you are going to cut a 4x8 sheet of plywood. There does not appear to be any supports to handle large pieces and keep the cut moving evenly - correct?

Asked by: KenJ
I did not even try as I have a circular saw. It would be impractical to use it for big items like a full plywood but you can try if somebody can help you.
Answered by: ArielBrampton
Date published: 2021-05-07

Can this be used to cut porcelain tile and/or ceramic tile?

Asked by: PNguyen
No no no no! That would be very bad and you could get hurt. You need to get a tile cutter, or an angle grinder with a diamond blade.
Answered by: diycamper
Date published: 2021-01-18

Is this table saw good enough for cutting the laminate floor (home project)?

Asked by: Steven
Hi Steven, Thanks for reaching out to us. This 13 Amp 8-1/4-inch Table Saw is great for all types of projects at home or on the jobsite. whether you are cutting 2x4's for framing or cutting laminate flooring this saw will be able to cut it all while being quiet and light weight. To have the smoothest and cleanest cuts especially on flooring you may want to obtain a blade with higher TPI. To learn more about this product and blades that work with it, contact 1-800-525-2579. Thanks, RYOBI Canada Team.
Answered by: The Ryobi Canada Team
Date published: 2021-09-08

Can you cut a 4x8 sheet of plywood by your self? how do you support the sheet while cutting?

Asked by: KenJ
Hi KenJ, Thanks for reaching out. To safely cut a 4x8 sheet of plywood you would need a second pair of hands or other assistance. Our 8-1/4-inch table saw will be able to cut normal plywood of several thickness. To learn more about our table saws and how to properly use them please contact 1-800-525-2579. Thanks, RYOBI Canada Team.
Answered by: The Ryobi Canada Team
Date published: 2021-05-11

does it come with saw blade

Asked by: artnik
Hi there, Thanks for reaching out to us regarding the 13 Amp 8-1/4 -inch Table Saw. Yes, this unit comes with an 8-1/4 -inch blade. For further information, please contact RYOBI Customer Support at 1-800-525-2579. Thanks, RYOBI Canada Team.
Answered by: The Ryobi Canada Team
Date published: 2022-10-31

I just bought my own table saw. 1st time with Ryobi. I know it's a brushed motor but does it normally spark on start, while running and when turning it off?

Asked by: sn9612331
sn9612331, Thanks for reaching out to us. This 13 Amp 8-1/4-inch Table Saw should not spark when turning on or off, this is not a common issue. If your are still experiencing this, please contact our customer support center at 1-800-525-2579 or speak with your local Home Depot. Thanks, RYOBI Canada Team.
Answered by: The Ryobi Canada Team
Date published: 2022-03-29

Can I use this table saw to cut a 4 by 4 cedar post? 

Asked by: Question boy
Frankly I do not know, I never tried it. I think if you cannot cut it from one side, you may cut it twice by flipping it.
Answered by: EZ going
Date published: 2021-06-22

Can I cut a 2 by 4 on this table saw at the 90 degree angle?

Asked by: abdullah shibly
Yes, very easy.
Answered by: EZ going
Date published: 2020-12-31
  • y_2024, m_2, d_26, h_11CST
  • bvseo_bulk, prod_bvqa, vn_bulk_3.0.38
  • cp_1, bvpage1
  • co_hasquestionsanswers, tq_322
  • loc_en_CA, sid_1001464923, prod, sort_[SortEntry(order=NUM_ANSWERS, direction=DESCENDING)]
  • clientName_homedepot-canada
  • bvseo_sdk, java_sdk, bvseo-4.0.0
  • CLOUD, getContent, 84ms
  • QUESTIONS, PRODUCT