Maintaining clean, safe stores is one of our top priorities.  Learn More

RYOBI 2-inch Carbon Hole Saw

Model # A10HS05|Store SKU # 1000655841

Overview

Model # A10HS05 Store SKU # 1000655841

RYOBI introduces the RYOBI 2-inch 1-Piece Hole Saw. This hole saw features a deep cup that allows the user to cut through all 2X material in one pass and also has an aggressive tooth design for any encounters with nails while cutting. To learn more about RYOBI tools, go to ryobitools.com and check out RYOBI Nation. See below for more information on this tool.

  1. Deep hole saw cup cuts through 2X materials in one pass
  1. Ejection slots provide easy plug removal for user convenience
  1. Aggressive tooth design
  1. Includes: (1) A10HS05 2-inch Carbon Hole Saw

Specifications

Dimensions

Assembled Depth (in inches)
3.88
Assembled Height (in inches)
5.75
Assembled Weight (in lbs)
0.15
Assembled Width (in inches)
2.06
Packaged Depth (in inches)
3.87
Packaged Height (in inches)
5.75
Packaged Weight (In lbs)
0.26
Packaged Width (in inches)
2.09

Details

Arbor Included
Yes
Bit Diameter (In.)
2
Bit Length (In.)
5-3/4
Bit Material
Carbon
Country of Origin
CN-China
Cuts Through
Wood, Plastic
Drill Bit Type
Hole Saws
Ideally Used With
Circular Saws
Individual/Set
Individual
Material Application
Wood
Number of Pieces in Set
1
Power Tool Accessory Features
Universal
Power Tool Accessory Type
Hole Saws & Accessories
Shank Diameter (In.)
1
Shank Type
Hex
Tip Material
Carbon

Warranty / Certifications

For warranty information, contact 1-800-525-2579 or visit www.ryobitools.ca
2-inch Carbon Hole SawRYOBI 2-inch Carbon Hole SawRYOBI introduces the RYOBI 2-inch 1-Piece Hole Saw. This hole saw features a deep cup that allows the user to cut through all 2X material in one pass and also has an aggressive tooth design for any encounters with nails while cutting. To learn more about RYOBI tools, go to ryobitools.com and check out RYOBI Nation. See below for more information on this tool.
RYOBI
1000655841
2-inch Carbon Hole Saw is rated 4.0 out of 5 by 14.
  • y_2021, m_7, d_28, h_20
  • bvseo_bulk, prod_bvrr, vn_bulk_3.0.18
  • cp_1, bvpage1
  • co_hasreviews, tv_0, tr_14
  • loc_en_CA, sid_1000655841, prod, sort_[SortEntry(order=SUBMISSION_TIME, direction=DESCENDING)]
  • clientName_homedepot-canada
  • bvseo_sdk, java_sdk, bvseo-4.0.0
  • CLOUD, getAggregateRating, 100ms
  • REVIEWS, PRODUCT
Rated 5 out of 5 by from I used this drill to create a hole so I could feed cable wires for a stereo receiver. It was very... I used this drill to create a hole so I could feed cable wires for a stereo receiver. It was very easy to use & did the job it was used for.
Date published: 2021-03-05
Rated 5 out of 5 by from Durable Perfect for what I needed. Part is the right size and right material for most jobs inside the house.
Date published: 2020-12-11
Rated 5 out of 5 by from Excellent job. Smooth cut.... Excellent job. Smooth cut.
Date published: 2020-11-25
Rated 5 out of 5 by from Used to cut access holes in fiberglass pool stairs. Made... Used to cut access holes in fiberglass pool stairs. Made clean cuts that allowed me to insert the cut outs back into holes before fiberglassing over them.
Date published: 2020-08-25
Rated 3 out of 5 by from Only good for rough cutting 2x walls for plumbing... Only good for rough cutting 2x walls for plumbing electrical etc.This bit tears up the wood.
Date published: 2020-02-11
Rated 1 out of 5 by from The destroyer That’s right you read it right.This 2”Ryobi bit destroys starts uneven and rough at the beginning of the cut and ends with a lot of tearing at the exit.It does not matter if the wood is pine or maple.Same thing happens.Lots of extra clean up sanding. If you are making wood wheels etc.Not a good choice for woodworking.Only good for drilling holes in studs that no one will ever see for a hundred years.
Date published: 2020-01-31
Rated 3 out of 5 by from The blade is not as perfect as other brands but it still worked well. I used it to cut pvc and in... The blade is not as perfect as other brands but it still worked well. I used it to cut pvc and installed my sub pump drain into my downspout. Not bad if you just need to drill a hole and you're looking for something cheap. I'll eventually invest in a nice set and probably never use it..
Date published: 2019-12-07
Rated 5 out of 5 by from built my own desk and needed holes for cables... ... built my own desk and needed holes for cables... :)
Date published: 2019-02-27
  • y_2021, m_7, d_28, h_20
  • bvseo_bulk, prod_bvrr, vn_bulk_3.0.18
  • cp_1, bvpage1
  • co_hasreviews, tv_0, tr_14
  • loc_en_CA, sid_1000655841, prod, sort_[SortEntry(order=SUBMISSION_TIME, direction=DESCENDING)]
  • clientName_homedepot-canada
  • bvseo_sdk, java_sdk, bvseo-4.0.0
  • CLOUD, getReviews, 27ms
  • REVIEWS, PRODUCT

Will this work with rigged inpact?

I figure yoj can use this holesaw with any inpact but just making sure before I buy it
Asked by: Gohuge
Gohuge, thank you for your interest in the RYOBI 2 in. Carbon Hole Saw. This is a 1/4 in. hex shank so it sounds like it could work. A drill and an impact driver do work differently though and normally hole saws are not used in an impact driver. There is no indication that this hole saw will work in an impact driver as it does not mention or show a picture of it's ability to do so. Thank you for asking, If you have further questions and would like to speak with a RYOBI Customer Experience Professional, please call, 1-800-525-2579 M-F from 9am-6pm EST. Hope this helps! - Vini
Answered by: RYOBI Tools Team
Date published: 2021-06-29

will it work on fiberglass panel

will it work on fiberglass panel
Asked by: tempprop
Hello Tempprop, Thanks for your interest in the RYOBI A10HS05 2 in. Carbon Hole Saw. This hole saw is made for wood. - Eve
Answered by: RYOBI Tools Team
Date published: 2020-10-20

I need to drill through a drywall for blown-in insulation. Will this work?

I need to drill through a drywall for blown-in insulation. Will this work?
Asked by: John
Not good for drywall. Craftsman and Ace hole bits cut smooth
Answered by: Bitmaster
Date published: 2020-02-11

will this work on metal

Asked by: meto
No, this product does not work with metal.
Answered by: Communityanswer
Date published: 2020-04-03

I need to cut through a 3/4 inch piece of mahogany in a custom cabinet. Will this be sharp enoug...

I need to cut through a 3/4 inch piece of mahogany in a custom cabinet. Will this be sharp enough to get through without wobbling and making the hole too large? I don't want a bad hole in a very nice cabinet.
Asked by: George
Hi George, This should work fine for this task. Thanks for asking. Greg
Answered by: RYOBI Tools Team
Date published: 2019-01-22
  • y_2021, m_7, d_27, h_19CST
  • bvseo_bulk, prod_bvqa, vn_bulk_3.0.18
  • cp_1, bvpage1
  • co_hasquestionsanswers, tq_5
  • loc_en_CA, sid_1000655841, prod, sort_[SortEntry(order=LAST_APPROVED_ANSWER_SUBMISSION_TIME, direction=DESCENDING)]
  • clientName_homedepot-canada
  • bvseo_sdk, java_sdk, bvseo-4.0.0
  • CLOUD, getContent, 84ms
  • QUESTIONS, PRODUCT