Model # 9999565778|Store SKU # 1001716255
The DHERSD/BW is a programmable digital thermostat designed to control the Ditra-Heat heating cables. There are over 250 pre-set programs including an anticipated start function to choose from. It also has a built-in ground fault circuit interrupter (GFCI) and works with the 120-Volt and 240-Volt cables.
The DHEHK12016 is a twisted pair heating cable designed specifically for use with the Ditra-Heat membrane for interior floor warming applications. This 120-Volt, 52.9 ft. long cable comes with one temperature sensor. The cable can be installed without returning to the thermostat.
DITRA-HEAT-E-R is a non-programmable digital thermostat used to control the DITRA-HEAT-E-HK heating cables (either 120 V or 240 V). The thermostat features a 5 mA built-in ground fault circuit interrupter (GFCI) with indicator light and includes a floor temperature sensor. DITRA-HEAT-E-R is operated via a simple on/off switch. Two heating cables may be connected to the thermostat, up to the total heating load limit of 15 amps. The DITRA-HEAT-E-RR power module may be used in conjunction with the thermostat when the heating load exceeds 15 amps (e.g., in large floor applications) to maintain a single point of control.
The DHEHK12064 is a twisted pair heating cable designed specifically for use with the Ditra-Heat membrane for interior floor warming applications. This 120-Volt, 212.9 ft. long cable comes with one temperature sensor. The cable can be installed without returning to the thermostat.
Schluter®-DITRA-HEAT-E-HK are twisted pair heating cables designed for integration with the DITRA-HEAT uncoupling membrane in interior floor warming applications.
