Schluter Kerdi-Kereck-F Pre-Formed Waterproofing Tile Edge Inside Corners (2-Pack)

Model # 9999543222|Store SKU # 1000833521

Overview

Model # 9999543222 Store SKU # 1000833521

The Kerdi-Kereck-F Pre-Formed Waterproofing Inside Corners (2-Pack) are pre-formed seamless corners made of Schluter Kerdi for waterproofing inside corners. Made of a polyethylene construction. These inside corners are for use with tile.

Kerdi-Kereck-F waterproofing inside corners are used to waterproof the inside corners of a tiled shower installation before installing tile, and is used with the Kerdi waterproof shower system

For commercial and residential use, only 1 mil thick so there is no build up in the corners and also used for the corners on the Kerdi shower curb

Orange polyethylene construction waterproofs the inside corners of your shower floor, installs before setting your tile makes installation much easier

Easy to install with unmodified thinset (sold separately), use a 1/4 in. x 3/16 in. v-notch trowel to apply thinset, then install Kerdi corners

Kerdi corners are installed before installing the tile

Specifications

Dimensions

Assembled Depth (in inches): 1.0
Assembled Height (in inches): 4.75
Assembled Weight (in lbs): 0.167
Assembled Width (in inches): 8.5
Packaged Depth (in inches): 1
Packaged Height (in inches): 1
Packaged Weight (In lbs): 1
Packaged Width (in inches): 1

Details

Colour Family: Yellow
Material: Wood

Warranty / Certifications

Related Products

Schluter Ditra 3 ft. x 16. 5 ft. x 1/8-inch Uncoupling Membrane (54 sq. ft./ Roll)

Uncoupling and waterproofing underlayment for ceramic, porcelain and stone tiles

View Details

Dal Tile Ditra 323 sq. ft. 3 ft. 3 in. x 98 ft. 5 in. x 1/8 in. Polyethylene Underlayment for Tile

Ditra is a polyethylene uncoupling membrane. It has a grid structure of square cutback cavities with an anchoring fleece laminated to the underside. The open rib structure allows for in-plane movement, which effectively neutralizes the movement stresses between the substrate and the tile to prevent cracking. The thickness of the tile assembly is minimized by using Ditra, which is only 1/8 in. thick.

View Details

Schluter Jolly Satin Nickel Anodized Aluminum 5/16-inch x 8 ft. 2-1/2-inch Metal Tile Edging Trim

Universal trim for any ceramic or stone tile; finishes and protects the edges of tiled coverings. It provides a smooth transition between same height surfaces.

View Details

Schluter Kerdi-Line 31.5-inch Stainless Steel Channel Body

The Schluter-KERDI-LINE is a low profile linear floor drain specifically designed for bonded waterproofing assemblies. KERDI-LINE can be installed adjacent to walls or at intermediate locations in showers, wet rooms, and other applications that require waterproofing and drainage.

View Details