SharkBite Max 1/2 Inch Water Hammer Arrestor Tee Fitting

Model # UR22630|Store SKU # 1001615617

Overview

Model # UR22630 Store SKU # 1001615617

SharkBite Max- Water Hammer Arrestors are engineered devices that provide a maintenance free continuous protection system against detrimental destructive forces generated by the immediate cessation of water flowing in the water distribution system. The SharkBite Max Water Hammer Arrestor is engineered to expressly be used with SharkBite. The SharkBite Max Water Hammer Arrestor can be installed horizontally and vertical and can be connected in seconds to copper tubing, and CTS CPVC, PEX and PE-RT

Fastest way to connect PEX, copper, CPVC, or PE-RT Pipe

Stainless Steel Retainer for added strength, rated to 400 psi

Allows for smoother connections, requires less insertion force

PEX tube liner not required

Lead free DZR brass construction for durability and reliability

Can be installed on wet or dry lines pressure tested immediately

The Home Depot will provide an accessible format of PDFs upon request. Please contact us at
1-800-628-0525.

Specifications

Fitting Size (in.)

1/2"

Connection Method

Connector

Fitting or Connector Type

Tee

Material

Brass

Application

Water Supply

Dimensions

Assembled Depth (in inches): 7.09
Assembled Height (in inches): 1.3
Assembled Weight (in lbs): 0.556
Assembled Width (in inches): 2.91
Packaged Depth (in inches): 7.09
Packaged Height (in inches): 1.3
Packaged Weight (In lbs): 0.559
Packaged Width (in inches): 2.91

Details

Application: Water Supply
Connection Method: Connector
Fitting or Connector Type: Tee
Fitting Size (in.): 1/2"
Length (in.): 6.5
Material: Brass

Warranty / Certifications

RWC_Warranty_ EN

Related Products

Sioux Chief Adapter 1/2 inch Outside Diameter Flare X 1/2 inch Male Fitting No Lead 1/Bg

Lead-free brass flare fittings are economical, reusable and resistant to mechanical pullout. They are commonly used for gasoline, grease, oil, water, vacuum, air lines, L.P. and natural gas. In combination with forged nuts (part 412, 413 or 413R) they can be used for refrigeration, air conditioning and other applications involving hard to hold liquids and gases. lead-free brass is not more than a weighted average of 0.25% lead when used with respect to the wetted surfaces of pipes and pipe and plumbing fittings and fixtures.

View Details

SharkBite 1/2-inch Brass Push-to-Connect End Stop Fitting - 4 Pack

The 1/2 inch SharkBite Push-Fit Endstop is the easiest way to cap copper, CPVC or PEX pipe in any combination with no soldering, clamps, unions or glue. Just insert the pipe and the stainless steel teeth bite down and grip tight, while a specially formulat.

View Details

SharkBite 1/2-inch Brass Push-to-Connect Tee Fitting - 4 Pack

The 1/2 inch Shark Bite Push-to-Connect Tee is the easiest way to join copper, CPVC or PEX pipe in any combination with no soldering, clamps, unions or glue. Just insert the pipe and the stainless steel teeth bite down and grip tight, while a specially formulated O-ring compresses to create a perfect seal. Disassembly is just as fast using the simple disconnect tool so fittings and valves can be easily changed and reused. They can even be rotated after assembly for easier installation in tight spaces. Shark Bite Fittings are certified for potable water supply and hydronic heating applications. Get Shark Bite and get a grip on your next plumbing project.

View Details

Sioux Chief Adapter 3/4 inch Male Hose Thread X 1/2 inch Female Fitting Brass No Lead 1/Bg

All hose threads are manufactured to highest quality standards and tolerances. Lead-free brass is not more than a weighted average of 0.25% lead when used with respect to the wetted surfaces of pipes and pipe plumbing fittings and fixtures. This hose fitting is easy to use for both contractors and the do-it-yourselfer.

View Details