Shop incredible Black Friday deals now! Hurry, event ends December 3. Shop event.

SharkBite Slip Push Fit Cpling 1/2 Inlf

Model # 407673|Store SKU # 1001144844

Overview

Model # 407673 Store SKU # 1001144844

SLIP PUSH FIT CPLING 1/2 inLF

Rated to 200° F and 200 PSI

Corrosion resistant, DZR brass body

Designed for hydronic heating as well as potable water

Approved for underground installations

Specifications

Dimensions

Assembled Depth (in inches): 0.181
Assembled Height (in inches): 0.181
Assembled Weight (in lbs): 0.076
Assembled Width (in inches): 0.181
Packaged Depth (in inches): 0.18
Packaged Height (in inches): 0.18
Packaged Weight (In lbs): 0.08
Packaged Width (in inches): 0.18

Details

Application: Potable Water, Water Supply
Connectivity: Push to Connect
Facilities Maintenance
Fitting or Connector Type: Coupling
Fitting Size (in): 1/2
Material: Brass

Warranty / Certifications

For more information please contact customer service at 1-800-628-0525

Slip Push Fit Cpling 1/2 Inlf SharkBite Slip Push Fit Cpling 1/2 Inlf

SLIP PUSH FIT CPLING 1/2 inLF

SharkBite

1001144844

CAD27.872023-12-01https://www.homedepot.ca/product/sharkbite-slip-push-fit-cpling-1-2-inlf/1001144844

The Home Depot Canada

Slip Push Fit Cpling 1/2 Inlf is rated 0.0 out of 5 by 6.

Rated 5 out of 5 by firstdown80 from Just Fantastic! These push-to-connect or slip couplings from Sharkbite is simply amazing! I had a leaking water softener but to replace the softener head I had to remove all the copper pipes by cutting it because it was all welded together. I cut my pipe at the inlet and outlet end and push these 2 couplings on each end and put everything back together. No leaks and just easy to install.

Date published: 2015-12-20

Rated 5 out of 5 by sNoProblem from I'll never solder again. A pin hole leak in a 1/2" copper pipe in the ceiling created a "mystery" stain in my Mom's ceiling. After hiring a roofer ($300) a handyman ($100), the source remained a mystery. After opening a hole in the ceiling I found the source - a pin hole leak. Not wanting to solder a coupling sleeve, I checked the local code and purchased a SharkBite slip coupling. It installed easily and solved the leaking problem. Great product SharkBite

Date published: 2017-03-05

Rated 5 out of 5 by Larry D 44691 from Saved a LOT of Work! I had to remove 2, 50-year-old corroded, copper shutoffs that were leaking in my daughters house. They were no longer needed. Of course they were right next to a floor joist, partially under the center beam, and connected to T-fittings on the other side of the beam. I also had dropped ceiling supports in my way. The hardest part of the job was getting the pipes by the beam cut, squared, and deburred. (Think Milwaukee Hackzall, Dremel, small files, steel wool. I'd have had to do this anyway if I were sweating in the new pipe.) Once the pipes were ready, the straight couplings and slip couplings worked like a dream. I can’t begin to express how happy I am that I wasn’t sweating in fittings up there!

Date published: 2018-01-16

Rated 5 out of 5 by winnipegglen from Quick and easy fix to punctured pipe When a nail found a 3/4" pex pipe during this weekend's framing project, this DIYer thought a plumber would be required to put a stop to the newly-created gusher. I gave this slip coupling a try, though I was skeptical. To my surprise, this unit was not only incredibly easy to install, it works like a charm, saving me an embarrassing call to the plumber, and possibly even my marriage! Highly recommended!

Date published: 2017-05-08

Rated 1 out of 5 by Ronm13 from Bad for tight area I don't know if it's the area or not, but I followed instructions very carefully. The slip end went on perfect. It will not budge now after inserting the other pipe. The pipe is in about a 1/4 inch. Not nearly far enough. I've tried everything. WD40, tapping with a wrench, now I'm stuck. It won't go on all the way, and won't come off either. So frustrating, been at this hours. I'll try again tomorrow

Date published: 2016-09-27

Rated 1 out of 5 by Steve72 from Not easy to install I needed a quick fix for my sprinkler outlet and tried this product. I watched the video and got my pieces cut and went to install. The barbs never bit as designed even after making sure the pipe was inserted correctly. I wasting a lot of time trying over and over. I noticed the barbs were flattened. When I tried turning on the water both ends leaked.

Date published: 2016-04-16