Siemens Service Entrance Loadcentre 100A with Main Breaker 32 Circuits Expandable to 64

Schneider Electric Homeline 60 Amp Main Breaker Loadcentre 12 space 24 Circuits Maximum

This service entrance panel is connected to the electrical meter and distributes electricity throughout the home. Each is equipped with a factory installed main circuit breaker, which serves as the main disconnect to turn off power to the loadcentre, as well as to protect the load center from an overload or short circuit. Homeline loadcentres are CSA approved to only accept Canadian Homeline breakers.

Siemens 15-30 Amp 2-Pole Type QT Quad Style Thermal Magnetic Circuit Breaker

For Use In Siemens Type EQL, SEQ, EQG Loadcentres

Siemens 15 Amp AFCI/GFCI Dual Function Circuit Breaker, Plug on Loadcentre Style

The Dual Function Circuit Breaker combines GFCI and AFCI, protecting against both Arc Faults and Ground Faults. This, along with the new Self Test & Lockout feature, makes it the first in class in electrical safety for homeowners. The 2014 National Electrical Code (NEC) now requires both Arc Fault and Ground Fault protection on kitchen and laundry circuits. The Dual Function Circuit breaker combines these two devices into one solution that provides both cost savings and less hassle in installation and maintenance. This is a win solution for everyone. A device that tests itself - Testing GFCIs and AFCIs on a monthly basis is a good idea that is sometimes forgotten. Underwriters Laboratories (UL) suggests that AFCI/GFCI devices be tested every 30 days after installation to ensure they are properly working. Now the new Self Test & Lockout feature enables the Dual Function Circuit Breaker to automatically and continuously test itself to ensure that it is working properly.

Schneider Electric Square D Load centre QO 1 phase 40 spaces 54 circuits 100A main breaker PoN NEMA1 CSA

QO Load Centers offer premium features by allowing QO breakers, ground arc fault interrupters arc fault interrupters and surge arresters to be installed inside QO Load Centers enable the use of a full complement of accessories. Systems can be single or three phase and have indoor and outdoor versions. Indoor enclosures are designed to rotate 180 degrees to accommodate top or bottom service entrance feed which saves expensive service cable. QO Load Centers feature plated copper bus, providing superior performance and durability. This QO Load Center contains a main breaker and is rated at 100 A and 1 phase. This system provides 40 spaces in a NEMA 1 enclosure and it is Plug-on neutral load center. CQO load centers are CSA certified.