Halloween 🎃 Appliances BBQs & Outdoor Cooking Electrical Bath Blinds & Window Coverings Building Materials Cleaning Decking, Fencing & Gates Décor & Furniture Doors & Windows Kitchen Floors & Area Rugs Heating & Cooling Hardware Lighting & Ceiling Fans Lawn & Garden Centre Lumber & Composites Outdoor Living & Patio Outdoor Power Equipment Paint Plumbing Storage & Organization Sheds & Outdoor Structures Smart Home Tools All Departments Get More Done Days Refresh For Less Home Services Event
Get More Done Days is on now. Don't wait!  Shop Event

Simpson Strong-Tie E-Z Base 12-Gauge Black Powder-Coated Post Base for 4x4

Model # FPBB44|Store SKU # 1000793054

Simpson Strong-Tie E-Z Base 12-Gauge Black Powder-Coated Post Base for 4x4

Overview

Model # FPBB44 Store SKU # 1000793054

Replacing an entire fence can be an expensive and difficult task. Simpson Strong-Tie offers a line of products designed to help make reinforcing fence posts easy and economical. The E-Z Base, E-Z Mender and E-Z Spike offer simple solutions for all types of fence post projects. The FPBB44 allows easy installation of 4x4 wood posts on existing concrete.

  1. Easy to install in concrete with 1/2 in. diameter anchors
  1. Post size: 4x4
  1. Made from 12-gauge steel
  1. Black powder-coated paint for a decorative look
  1. Install with 1/4 inch Strong-Drive® SDS Heavy-Duty Connector screws or 1/4 inch HDG lag screws

Manual

  1. 1000793054_Installation Guide.pdf
  2. 1000793054_Project Ideas.pdf
  3. 1000793054_Measurement Guide.pdf
  4. 1000793054_Warranty.pdf
  5. 1000793054_Proeject Ideas.pdf

The Home Depot will provide an accessible format of PDFs upon request. Please contact us at
1-800-628-0525.

Specifications

Dimensions

Assembled Depth (in inches)
6.825
Assembled Height (in inches)
5.6
Assembled Weight (in lbs)
2.59
Assembled Width (in inches)
3.825
Packaged Depth (in inches)
3.8
Packaged Height (in inches)
5.59
Packaged Weight (In lbs)
2.59
Packaged Width (in inches)
6.8

Details

Block Shape
Rectangle
Colour Family
Black
Country of Origin
US-United States
Face Type
Special
Finish
Painted
Length (in.)
6.82
Material
Steel
Type
Regular Post Base

Warranty / Certifications

Limited Warranty
Related Searches
simpson strong-tie post base
post base

Related Products

Simpson Strong-Tie ABA ZMAX Galvanized Adjustable Standoff Post Base for 6x6

Post and column bases secure the bottom of posts or columns to concrete and are perfect for decks or patio covers. Models are available for attaching to existing hardened concrete, wet concrete, as well as wood. The AB series also offers adjustability around the anchor bolt to achieve optimum post placement. Many models provide a 1 inch standoff from the concrete to help avoid post-end rot from moisture.

Post and column bases secure the bottom of posts or columns to concrete and are perfect for decks or patio covers. Models are available for attaching to existing hardened concrete, wet concrete, as well as wood. The AB series also offers adjustability around the anchor bolt to achieve optimum post placement. Many models provide a 1 inch standoff from the concrete to help avoid post-end rot from moisture.
View Details

Simpson Strong-Tie BC Galvanized Post Base for 8x

Post and column bases secure the bottom of posts or columns to concrete and are perfect for decks or patio covers. Models are available for attaching to existing hardened concrete, wet concrete, as well as wood. The BC series is for light base applications.

Post and column bases secure the bottom of posts or columns to concrete and are perfect for decks or patio covers. Models are available for attaching to existing hardened concrete, wet concrete, as well as wood. The BC series is for light base applications.
View Details

Simpson Strong-Tie EPB Hot-Dip Galvanized Pier-Block Elevated Post Base for 4x4

Post and column bases secure the bottom of posts or columns to concrete and are perfect for decks or patio covers. Models are available for attaching to existing hardened concrete, wet concrete, as well as wood. The cast-in-place EPB series provides a secure connection to the concrete and the code-required 1 in. standoff to help prevent rot at the post end.

Post and column bases secure the bottom of posts or columns to concrete and are perfect for decks or patio covers. Models are available for attaching to existing hardened concrete, wet concrete, as well as wood. The cast-in-place EPB series provides a secure connection to the concrete and the code-required 1 in. standoff to help prevent rot at the post end.
View Details

Simpson Strong-Tie Outdoor Accents Avant Collection ZMAX, Black Powder-Coated Post Base for 10x10 Rough

The Simpson Strong-Tie Outdoor Accents line of decorative hardware features connectors and fasteners that bring beauty and strength to custom outdoor living structures. The Avant Collection features straight edges and chamfered corners for a clean, timeless design. The APVB post bases secure the post or column to concrete and are perfect for outdoor projects, such as pergolas, patio covers and other top-supported structures. These post bases feature a clean, simple design and provide ZMAX galvanization with black powder-coat for extra corrosion resistance. The post base includes a 1-in. standoff from the concrete to help avoid post-end rot from moisture.

The Simpson Strong-Tie Outdoor Accents line of decorative hardware features connectors and fasteners that bring beauty and strength to custom outdoor living structures. The Avant Collection features straight edges and chamfered corners for a clean, timeless design. The APVB post bases secure the post or column to concrete and are perfect for outdoor projects, such as pergolas, patio covers and other top-supported structures. These post bases feature a clean, simple design and provide ZMAX galvanization with black powder-coat for extra corrosion resistance. The post base includes a 1-in. standoff from the concrete to help avoid post-end rot from moisture.
View Details
E-Z Base 12-Gauge Black Powder-Coated Post Base for 4x4Simpson Strong-Tie E-Z Base 12-Gauge Black Powder-Coated Post Base for 4x4Replacing an entire fence can be an expensive and difficult task. Simpson Strong-Tie offers a line of products designed to help make reinforcing fence posts easy and economical. The E-Z Base, E-Z Mender and E-Z Spike offer simple solutions for all types of fence post projects. The FPBB44 allows easy installation of 4x4 wood posts on existing concrete.
Simpson Strong-Tie
1000793054
CAD14.982024-09-08
The Home Depot Canada
E-Z Base 12-Gauge Black Powder-Coated Post Base for 4x4 is rated 4.5 out of 5 by 564.
  • y_2024, m_9, d_7, h_5
  • bvseo_bulk, prod_bvrr, vn_bulk_3.0.42
  • cp_1, bvpage1
  • co_hasreviews, tv_112, tr_452
  • loc_en_CA, sid_1000793054, prod, sort_[SortEntry(order=RELEVANCE, direction=DESCENDING)]
  • clientName_homedepot-canada
  • bvseo_sdk, java_sdk, bvseo-4.0.0
  • CLOUD, getAggregateRating, 37ms
  • REVIEWS, PRODUCT
Rated 5 out of 5 by from Good product Sturdy. Quality paint finish. Post fit is snug - you'll have to drive it home. Because of the tight fit, if you install the base even a little bit off-level, it will not be a vertical post, as I found out, and is 'on me'.
Date published: 2021-05-31
Rated 5 out of 5 by from Works well but additional associated costs require Great product and quite sturdy. This can work with or against you but the base to slot a 4x4 is meant for a finished 4x4 and this also presented itself with a bit of wiggle room. The need for the side bolts are requierd to prevent it from moving. What's more important, but doesn't come with are the concrete bolts to fasten it to the ground. Adding the cost of those (for me they were concrete bolts) raised the price of each post installation to be a bit on the expensive side for my application
Date published: 2024-08-20
Rated 5 out of 5 by from Solid Purchased this to support a post for a Deck landing. A fresh 4x4 fit snugly into it, suspect an older dried one would be an easier fit once it's shrunk a bit. All round solid product, now that the base is bolted into the concrete--it's not going anywhere--it will probably outlast the post. Great product, would buy again.
Date published: 2020-07-24
Rated 3 out of 5 by from Secure Works well. It is a extremely tight fit for a 4x4. I put some dish soap on the base and hit it in with a 4lb sledge. Only thing that they should change is the big ignorant sticker right across the front. It is a pain to get off if you are going to have an exposed base
Date published: 2018-08-04
Rated 1 out of 5 by from Don't buy this A lot of post movement inside of base. We used this as a gate and couldn't fix it. So we have to build another post in the ground and another concrete post base (not using this one again). Disappointed cuz the money spent on a cheaper one is a better solution.
Date published: 2024-08-07
Rated 5 out of 5 by from Keeping fence sturdy and strong, Recommend it. I have used it to to build little privacy fence on my drive way. Works really good. After few days of installation there was storm with high velocity wind and nothing happened to fence. Fence is sturdy and strong after storm. Use right concrete anchors.
Date published: 2020-08-10
Rated 5 out of 5 by from Works like a charm! Bought this to fix a small fence over cement and it does the job quite well. The main challenge was to drill the holes and make sure they were aligned.
Date published: 2022-07-28
Rated 4 out of 5 by from EZ Base post holder Good solid construction. A little tight for a 4x4 but looks and feels like it will last a long time.
Date published: 2024-04-15
  • y_2024, m_9, d_7, h_5
  • bvseo_bulk, prod_bvrr, vn_bulk_3.0.42
  • cp_1, bvpage1
  • co_hasreviews, tv_112, tr_452
  • loc_en_CA, sid_1000793054, prod, sort_[SortEntry(order=RELEVANCE, direction=DESCENDING)]
  • clientName_homedepot-canada
  • bvseo_sdk, java_sdk, bvseo-4.0.0
  • CLOUD, getReviews, 14ms
  • REVIEWS, PRODUCT

what should be used to anchor this to concrete?

Asked by: corora
Hi! E-Z Base (part FPBB44) requires four (4) - 1/2" diameter anchor bolts for anchoring to the concrete foundation. The anchors need to have a hot-dip galvanized finish. However, the depth of embedment needs to be determined by the project designer.
Answered by: The Home Depot Canada
Date published: 2021-06-23

Does this bracket is capable to hold the post that is attached to wooden gate that is 50-60 kg? 

Asked by: Maulik
My opinion is that it would not support a gate of that weight, at least not without a back-brace on the hinge post. To support a gate like that, you would need to install a brace on the hinge post to stop it from bending over from the weight of the gate.
Answered by: RonH
Date published: 2021-07-01

Can I use these to install 4"x4"x8' cedar posts for a gazebo? I am looking to drill the base into 3/4" outdoor porcelain pavers that are 24"x24".

Asked by: matt72
I used them on a 10 ft by 10 ft dog shelter with a sloped metal roof with 4 -4by4 posts. The 2 in the front were 8 ft. The 2 in the back were 7 ft. I drilled the bases with tapcon screws into 1 1/2 inch thick 24 by 30 inch cement patio stones.(They weigh 100 lbs each) My unit is nice and solid. I would say the heavier your pavers the better, To give it stability.
Answered by: Gerryl
Date published: 2022-02-19

Can I install this underground for underpinning my 4 x 4 post?

Asked by: Juice
Hello Juice, this is Stacy with Simpson Strong-Tie. The E-Z Base is meant to be installed on existing concrete. Physically you could potentially install it underground but we cannot guarantee it will work. If you have any questions please feel free to call us at (800) 999-5099. We look forward to hearing from you.
Answered by: Simpson Strong-Tie
Date published: 2022-07-14

Would this bracket work sufficiently on asphalt? Or would the asphalt not be considered strong enough? I'm planning to use it with a fence gate setup.

Asked by: KYeam
I would not recommend anchoring in asphalt, I don’t believe it will hold sufficiently. The brackets work amazing on concrete but in your case you’d be better off to cut the asphalt, dig and pour the posts into concrete. 
Answered by: Todd R
Date published: 2021-04-09

Hi Can I use this base to support posts of a shelter with corrugated plastic tiles? Thank you

Asked by: Frank
​Hi Frank, thank you for your message. We want to make sure we address your question about using the E-Z Base with corrugated plastic tiles. The E-Z Base is meant to be used for fences that are 4' or shorter and is non-load rated. With that being said we would not be able to comment on if the base would work for your application trying to support a shelter. Since you are wanting to use a base to support posts of a shelter you might want to take a look at some of our load-rated post bases such as the RPBZ, ABA, ABU, etc. If you need more information or have additional questions, please contact the Simpson Strong-Tie Customer Service team at 800-999-5099. We look forward to hearing from you.​​ - Stacy
Answered by: Simpson Strong-Tie
Date published: 2022-03-22

does this only work with tru 4x4 or is it meant to fit 3.5x3.5

Asked by: Jeff85
E-Z Base product is designed to accommodate a standard nominal 4x4 post which actual measurements are 3 1/2"x3 1/2".
Answered by: The Home Depot Canada
Date published: 2021-04-18

Can I use it for 4x4x(10height). I am going to build 4 post pergola with it .

Asked by: Hamz
Yes you can just make sure you use some good anchors into the ground
Answered by: Stevenv89
Date published: 2022-03-20
  • y_2024, m_9, d_8, h_4CST
  • bvseo_bulk, prod_bvqa, vn_bulk_3.0.42
  • cp_1, bvpage1
  • co_hasquestionsanswers, tq_177
  • loc_en_CA, sid_1000793054, prod, sort_[SortEntry(order=NUM_ANSWERS, direction=DESCENDING)]
  • clientName_homedepot-canada
  • bvseo_sdk, java_sdk, bvseo-4.0.0
  • CLOUD, getContent, 65ms
  • QUESTIONS, PRODUCT