BBQs & Outdoor Cooking Appliances Bath Blinds & Window Coverings Building Materials Cleaning Décor & Furniture Doors & Windows Electrical Heating & Cooling Floors & Area Rugs Hardware Kitchen Lawn & Garden Centre Lighting & Ceiling Fans Lumber & Composites Outdoor Living & Patio Outdoor Power Equipment Paint Plumbing Sheds & Outdoor Structures Storage & Organization Smart Home Tools All Departments Spring Outdoor Power Deals Event Ryobi Days
Get our 5 days in-store only door crashers. Till May 18.  View All

Simpson Strong-Tie Strong-Drive SD CONNECTOR Screw 10 x 2-1/2 in. 1/4-Hex Drive, Mech. Galv. (500-Qty)

Model # SD10212R500|Store SKU # 1001784385

Simpson Strong-Tie Strong-Drive SD CONNECTOR Screw 10 x 2-1/2 in. 1/4-Hex Drive, Mech. Galv. (500-Qty)

Overview

Model # SD10212R500 Store SKU # 1001784385

The Strong-Drive SD Connector screw is specifically designed to replace nails in certain Simpson Strong-Tie connectors and is the only screw approved for that application. The load-rated SD screw has been tested and approved for use in many popular Simpson Strong-Tie products. In certain applications screws are easier and more convenient to install than nails, and the single-fastener load values achieved by the SD screw exceed those of typical 10d common or 16d common nails. In addition, the galvanized coating makes the SD screw ideal for interior and most exterior conditions.

  1. Tested and approved for use in many of Simpson Strong-Tie's best-selling connectors for both interior and most exterior applications
  1. Ideal for use in connector applications where more control is desired or using a hammer is inconvenient
  1. 1/4-in. hex head with 0.37-in. diameter integrated washer reduces cam-out and is stamped with the Simpson Strong-Tie "" sign and the fastener size for easy identification after installation
  1. Shank is specifically designed to match the fastener holes in Simpson Strong-Tie connectors
  1. Optimized heat treating for ductility and strength
  1. Size: 10 x 2-1/2 in.

Manual

  1. 1001784385_Installation Guide-pdf.pdf
  2. 1001784385_Project Ideas-pdf.pdf
  3. 1001784385_Warranty-pdf.pdf

The Home Depot will provide an accessible format of PDFs upon request. Please contact us at
1-800-628-0525.

Specifications

Dimensions

Assembled Depth (in inches)
0.37
Assembled Height (in inches)
2.657
Assembled Weight (in lbs)
0.014
Assembled Width (in inches)
0.37
Packaged Depth (in inches)
7.13
Packaged Height (in inches)
6.13
Packaged Weight (In lbs)
7
Packaged Width (in inches)
3.75

Details

Collated
No
Colour Family
Steel
Drive Style
Hex
Finish
Other
Head Type
Hex
Interior/Exterior
Interior/Exterior
Length (in.)
2.657
Material
Steel
Number of Pieces per Package
500
Package Quantity
500
Point Type
Sharp
Product Finish/Material
Steel
Product Length
2-1/2 in.
Size
#10
Thread Style
Standard

Warranty / Certifications

Limited Warranty
Related Searches
simpson strong-tie ledger
screw connector
simpson strong-tie shoes
simpson strong-tie 1/2 inch clip
simpson strong-tie connector

Related Products

Simpson Strong-Tie Ledger Connector System to Connect Composite Wood Ledger to ICF (Pack of 15)

The ICFVL ledger connector system is engineered to solve the challenges of mounting wood or steel ledgers to insulated concrete form (ICF) walls. The ICFVL is designed to provide both vertical and lateral, in-plane performance. There are many benefits over traditional anchor bolting, including better on center spacing in most cases, faster installation and no protrusions.

The ICFVL ledger connector system is engineered to solve the challenges of mounting wood or steel ledgers to insulated concrete form (ICF) walls. The ICFVL is designed to provide both vertical and lateral, in-plane performance. There are many benefits over traditional anchor bolting, including better on center spacing in most cases, faster installation and no protrusions.
View Details

Paulin 12 mm x 15 mm Phillips Drive Cam Connector Zinc Plated - 2 pcs

This cam connector is a thread less cylindrical fastener used in tandem with a cam screw to hold the cam screw in place. Primarily used in furniture applications to join to wood pieces together. Requires a pre-drilled, countersunk hole to install. The cam connector sits flush with the surface of the wood. Cam connectors and cam screws are sold separately.

This cam connector is a thread less cylindrical fastener used in tandem with a cam screw to hold the cam screw in place. Primarily used in furniture applications to join to wood pieces together. Requires a pre-drilled, countersunk hole to install. The cam connector sits flush with the surface of the wood. Cam connectors and cam screws are sold separately.
View Details

Simpson Strong-Tie HHDQ 18-3/4 inch Holdown w/ Strong-Drive SDS Screws

The HHDQ series of holdowns combines low deflection and high loads with ease of installation. They employ Simpson Strong-Tie Strong-Drive SDS Heavy-Duty Connector screws (included), which install easily, reduce fastener slip and provide a greater net section when compared to bolts. They may be installed either flush or raised off the mudsill without a reduction in load value.

The HHDQ series of holdowns combines low deflection and high loads with ease of installation. They employ Simpson Strong-Tie Strong-Drive SDS Heavy-Duty Connector screws (included), which install easily, reduce fastener slip and provide a greater net section when compared to bolts. They may be installed either flush or raised off the mudsill without a reduction in load value.
View Details

Simpson Strong-Tie 10 x 2 in. T25 6-Lobe, Tan Deck-Drive DSV Collated Wood Screw (750-Qty)

The Deck-Drive DSV Wood screw is a powerful fastening solution for preservative-treated decking applications. With its under-head nibs and fast-start tip, the DSV is ideally suited to be driven and countersunk into today's wood deck boards. The shank is designed to withstand the swelling and shrinkage that is common with fast-growth lumber. Available in hand-drive and in collated strips for use in the Simpson-Strong-Tie Quik Drive auto-feed screw driving system, DSV screws are also offered in a variety of sizes to fasten fascia and trim.

The Deck-Drive DSV Wood screw is a powerful fastening solution for preservative-treated decking applications. With its under-head nibs and fast-start tip, the DSV is ideally suited to be driven and countersunk into today's wood deck boards. The shank is designed to withstand the swelling and shrinkage that is common with fast-growth lumber. Available in hand-drive and in collated strips for use in the Simpson-Strong-Tie Quik Drive auto-feed screw driving system, DSV screws are also offered in a variety of sizes to fasten fascia and trim.
View Details
Strong-Drive SD CONNECTOR Screw 10 x 2-1/2 in. 1/4-Hex Drive, Mech. Galv. (500-Qty)Simpson Strong-Tie Strong-Drive SD CONNECTOR Screw 10 x 2-1/2 in. 1/4-Hex Drive, Mech. Galv. (500-Qty)The Strong-Drive SD Connector screw is specifically designed to replace nails in certain Simpson Strong-Tie connectors and is the only screw approved for that application. The load-rated SD screw has been tested and approved for use in many popular Simpson Strong-Tie products. In certain applications screws are easier and more convenient to install than nails, and the single-fastener load values achieved by the SD screw exceed those of typical 10d common or 16d common nails. In addition, the galvanized coating makes the SD screw ideal for interior and most exterior conditions.
Simpson Strong-Tie
1001784385
CAD982026-05-16
The Home Depot Canada
51