Model # QBONDONE-G|Store SKU # 1000677827
ROBERTS 6700 adhesive is formulated for installation of exterior and interior carpet, as well as artificial turf. It is a SBR latex, solvent-free adhesive offering high initial strength and an improved environmental footprint. Powered by Microban, this antimicrobial product protection helps fight the growth of stain and odor-causing bacteria that can cause product degradation. ROBERTS 6700 can be used to adhere most indoor/outdoor carpets with polypropylene, rubber-backed (foam, marine, waffle), urethane and tufted, woven or non-woven/needle-bond backings. This non-flammable adhesive can be used in areas where flammable adhesives pose a health risk due to fumes or flashback fires.
OmniGrip's unique formula sets a radical new standard, offering many benefits not found in traditional tile adhesives. Formulated with more solids and less water, OmniGrip shrinks up to 33% less than traditional adhesives ensuring maximum coverage and superior bonds. This high-polymer formula remains flexible allowing a wide variety of applications. Excellent for both floor and wall applications. Sets ceramic floor tile up to 16" x 16" (40.6 cm x 40.6 cm) and stone tile on floors up to 12" x 12" (30 cm x 30 cm). It can also be used in exterior wall applications in covered areas. Weighing 25% less than traditional adhesives, OmniGrip applies effortlessly and is easier to carry. Open and adjustment times are in excess of 60 minutes. Offers maximum resistance to prolonged water exposure as defined by ANSI A136.1, Type 1. Protected by MoldGard Technology to resist mould and mildew growth.
ROBERTS 2057 VCT-EZ® Adhesive is a SBR latex adhesive that provides excellent grab and high residual tack. This superior grade adhesive brushes, rolls or trowels on and helps hold the tile firmly in place, even when subjected to repeated cleaning and mopping. Powered by Microban, this antimicrobial product protection helps fight the growth of stain and odor-causing bacteria that can cause product degradation. When spread thinly as instructed, the adhesive dries correctly and turns clear, allowing chalk lines to remain visible. This adhesive is also suitable for installing vinyl-composition or vinyl-asphalt tile over existing vinyl-composition or vinyl-asphalt subfloors that are free from waxes, sealers and finishes. For interior use only, not recommended for installation of luxury vinyl tile (LVT), luxury vinyl plank (LVP) or solid vinyl-backed products.
ROBERTS 3300 High Performance is a high-solids adhesive formulated for the installation of hard-to-bond commercial carpet and most types of felt-backed, fiber-backed and paper-backed resilient floor coverings. Powered by Microban, this antimicrobial product protection helps fight the growth of stain and odor-causing bacteria that can cause product degradation. This adhesive remains tacky, and has great repositionable characteristics. It covers up to 108 sq. ft. per gallon depending on trowel type, substrate and installation conditions. It has a 30-minute open time, a 60-minute working time, and a 24-hour cure time. It offers a 2-year shelf life from date of production when stored in original unopened container, a 10-year limited adhesive bond warranty, and a lifetime warranty for installations performed by a Flooring Industry Association Certified Professional. This is an environmentally friendly formulation with low odor that is odorless when dry. Recommended for heavy traffic areas. VOC<1 g/L. Made in Canada.
Tackett QBond-One is a solvent-free acrylic latex based flooring adhesive. Maybe used for releasable applications of Tackett FiberFloor in residential areas only. May also be used for permanent applications of Tackett FiberFloor, Resilient (felt-backed) and Luxury Vinyl Plank and Tile flooring.
