Model # CB36|Store SKU # 1001058641
Single wall, 6" Black matt pipe used to connect wood stoves to chimneys and vent stacks. Its durable 24 gauge, pre-painted black steel construction is made for optimal efficiency and long-lasting use. Crimped end for easy assembly to round pipe of same diameter.
Ideal for use with appliances that require only ember protection, this Imperial 32-in x 42-in Stove Board is Type 1 UL 1618 listed to protect floors from ashes, embers and soot produced by pellet and wood stoves. It is constructed with durable steel-covered Class A mineral board that is 3/8-in thick and features a black finish with an embossed pebbled surface for an attractive look and lasting performance. The non-combustible Type 1 stove board, classified as an Ember Protector, has a modular design that allows you to install multiple boards to suit different appliances and can be used with electric heaters, kerosene, gas and other heating appliances. Before installing, refer to the stove manufacturer's manual, installation instructions, and local building codes for specific thermal resistance and clearance requirements.
Ideal for wood, coal or pellet stoves, stove pipe and barbecues.
With its Type 2 UL 1618 rating, this Imperial 46-in x 48-in Stove Board has an R-value of 1.5 that provides exceptional thermal and ember protection to insulate and shield floors and walls from intense heat, hot coals, ashes and soot produced by pellet and wood stoves. It is constructed with durable steel-covered Class A mineral board that is 1/2-in thick and features a black finish with an embossed pebbled surface for an attractive look and lasting performance. The non-combustible Type 2 stove board, classified as a Thermal Floor Protector, has a modular design that allows you to install multiple boards to suit different appliances and it can be used with electric heaters, kerosene, gas and other heating appliances. A stove board spacer kit is available for wall-mounting the board, reducing clearance between combustible materials and the appliance by as much as 67% to a minimum clearance of 12-in (kit sold separately). Before installing, refer to the stove manufacturer's manual, installation instructions, and local building codes for specific thermal resistance and clearance requirements.
All wood burning stoves radiate heat. While this is what they are designed to do, sometimes this is just not enough. Boost the Heat output on your Wood Stove by adding on a CB 36 blower kit. It comes with all mounting hardware and a whisper quiet 100 cfm blower.
