Refresh for Less is on now. Don't wait!  Shop event.

Overview

Model # Y200241 Store SKU # 1000111893

Varathane Premium Diamond Wood Finish Interior provides protection for your wood that is diamond hard, diamond clear, and diamond beautiful. Varathane Premium Diamond Wood Finish Interior is specifically developed to enhance the natural beauty of wood while providing the best scratch and stain resistance available. It offers a crystal clear finish that never yellows - resists water, alcohol, and household chemicals. This water based wood finish is also low odour and environmentally friendly. Its fast drying formula is easy to clean up with just water. Ideal for all interior stained, bare, or painted projects such as furniture, doors, cabinets, and trim. Over twice as durable as traditional wood finishes. Designed for indoor use only.

  1. Polyurethane formulation provides long lasting protection
  1. Diamond Clear, Diamond Hard, Diamond Beautiful
  1. Crystal clear finish that never yellows - resists water, alcohol, and household chemicals
  1. Low odour and environmentally friendly
  1. Fast drying formula is easy to clean up with just water
  1. Ideal for all interior stained, bare, or painted projects such as furniture, doors, cabinets, and trim
  1. Over twice as durable as traditional wood finishes
  1. Designed for indoor use only

Specifications

Dimensions

Assembled Depth (in inches)
4.25
Assembled Height (in inches)
4.9
Assembled Weight (in lbs)
37
Assembled Width (in inches)
4.25
Packaged Depth (in inches)
4.25
Packaged Height (in inches)
4.875
Packaged Weight (In lbs)
2.833
Packaged Width (in inches)
4.25

Details

Base Material
Water-Based
Can Size (L)
0.946
Country of Origin
CA-Canada
Coverage Area (Sq. Ft.)
85
Low VOC
Process Step
Protection
Sheen
Satin
Special Features
Fast Drying
Stain & Sealer in One
No
Transparency
Clear Toner

Warranty / Certifications

For questions, concerns and comments regarding Rust-Oleum products, please contact 1-800-387-3625
Premium Polyurethane Wood Finish for Interior, Water-Based in Satin Clear, 946 mLVarathane Diamond Finish Premium Polyurethane Wood Finish for Interior, Water-Based in Satin Clear, 946 mLVarathane Premium Diamond Wood Finish Interior provides protection for your wood that is diamond hard, diamond clear, and diamond beautiful. Varathane Premium Diamond Wood Finish Interior is specifically developed to enhance the natural beauty of wood while providing the best scratch and stain resistance available. It offers a crystal clear finish that never yellows - resists water, alcohol, and household chemicals. This water based wood finish is also low odour and environmentally friendly. Its fast drying formula is easy to clean up with just water. Ideal for all interior stained, bare, or painted projects such as furniture, doors, cabinets, and trim. Over twice as durable as traditional wood finishes. Designed for indoor use only.
Varathane Diamond Finish
1000111893
CAD41.872024-03-01
The Home Depot Canada
Premium Polyurethane Wood Finish for Interior, Water-Based in Satin Clear, 946 mL is rated 4.5 out of 5 by 1080.
  • y_2024, m_2, d_29, h_9
  • bvseo_bulk, prod_bvrr, vn_bulk_3.0.38
  • cp_1, bvpage1
  • co_hasreviews, tv_284, tr_796
  • loc_en_CA, sid_1000111893, prod, sort_[SortEntry(order=RELEVANCE, direction=DESCENDING)]
  • clientName_homedepot-canada
  • bvseo_sdk, java_sdk, bvseo-4.0.0
  • CLOUD, getAggregateRating, 75ms
  • REVIEWS, PRODUCT
Rated 4 out of 5 by from Works as intended I did a full strip and refinish. Once you get the thickness of each coat down it goes on fine. Used the varathane applicator. Ensure to mix extremely well, mine had a ton of solids settled at the bottom of the can. I didn't realize this on my first can and ended up with a lot of waste on the first go. Still turned out great. Did 4 rooms, appx 1000 sq ft and used 4 gallons. 3 coats in 3 rooms, 2 coats in a lesser used room. One thing I would change next time is better scuff sanding and dust removal after the first coat. This is a critical step and I did end up with some dust particles.
Date published: 2021-02-28
Rated 5 out of 5 by from Great top coat I like that finish I use it to seal and protect all my chalk paint projects... I have repainted a bedroom set, a desk and a bathroom vanity all holding up excellent to every day use. I usually do 2 coats and I wait at least a day before I apply the second coat. Works well for me,,, I use sponges to apply.
Date published: 2021-02-24
Rated 5 out of 5 by from Love this product It is hard to find a quality water-based clear coat for furniture. This is it!! Lovely barely-there sheen and no brush strokes!! The only issue is I have to drive 200km to pick it up as my local Home Depot fails to keep it in stock.
Date published: 2017-01-25
Rated 1 out of 5 by from Soft and Scratches Easily Feels like soft plastic, and scratches very easily. Gently rubbing a fingernail on it to test the surface hardness, and it scrapes right off without much effort. Other objects resting on the table left deep marks. Very disappointed.
Date published: 2022-06-29
Rated 1 out of 5 by from This is one of the worst wood finishing products I've ever used. The spray from the can is not properly atomized, and comes out in uncontrolled large droplets rather than a mist. The large drops land on the project and quickly dry into uneven dots. Subsequent sprays don't improve it and simply add to the poor finish. If you spray enough material to form a film, the film does not self-level and sets into an uneven, botchy finish. Don't waste your money and time!
Date published: 2014-07-31
Rated 5 out of 5 by from Great finish for desk I have used a number of water and oil based stains, and I'm very impressed with this one. I used this on a desk which I use 50 hours per week. It is holding up well and not scratching or breaking down, and is holding up to water rings. The soft touch feel is very nice, especially for a desk which is used daily. Application is easy and brush strokes are not obvious. Water based means easy clean up, and no odour after 24 hours.
Date published: 2020-08-26
Rated 5 out of 5 by from Excellent Product Completely transparent and matte, this varnish just brings out the beauty of the wood grain without showing. You can't even tell that it's there, but it does make a difference. It's also easy to clean with just warm water. It dries fast too, and the smell is not overwhelming. I used two coats on newly installed wainscoting but the second one is really not that necessary. The only downside is that it's pricey. Highly recommend it.
Date published: 2018-03-11
Rated 1 out of 5 by from Zero Integrity - Do Not Buy Absolute garbage product, do not waste your money. 5 days after applying the final coat on my oak hardwood floor I did a hardness test using my fingernail. The coating scratched off right down to the bare wood with very little pressure. Then after moving furniture back into the room I found the coating full of deep scuffs and scratches, again right down to the bare wood. After 5 coats and plenty of drying time this product does not hold up. If you were thinking about using this on your next project, think twice.
Date published: 2022-07-08
  • y_2024, m_2, d_29, h_9
  • bvseo_bulk, prod_bvrr, vn_bulk_3.0.38
  • cp_1, bvpage1
  • co_hasreviews, tv_284, tr_796
  • loc_en_CA, sid_1000111893, prod, sort_[SortEntry(order=RELEVANCE, direction=DESCENDING)]
  • clientName_homedepot-canada
  • bvseo_sdk, java_sdk, bvseo-4.0.0
  • CLOUD, getReviews, 22ms
  • REVIEWS, PRODUCT

How soon will I be able to place bedroom furniture back on my floors after final application? How many days will it take for zero odour/safely sleep in the room again?

Asked by: How many days
I recommend three days curing before replacing furniture. Set the furniture in place do not slide in place. It’s best to use felt pads also. Odour is mostly dissipated in one day. Excellent product. Too bad it’s doubled in price in three years.
Answered by: ATCD
Date published: 2023-12-07

I thought I followed proper directions for this product but after several days the clear coat is scratching off like a thin wax coating on the stained table top, how do I properly remove the finish coat now without damaging stain finish? 

Asked by: Jennyk123
Hi Jennyk123, We're sorry to hear about this! While the finish can be handled after a few hours, it can take between 7-14 days for full cure hardness, depending on how many coats were applied. Sanding will be the best option to remove the finish. However, you should still be careful not to remove the stain underneath.
Answered by: Rust-Oleum Answers
Date published: 2022-12-21

Can this be sprayed and is it safe to use over a painted surface

Asked by: the_count
Yes and yes. I spray it all the time with a gravity fed HVLP pneumatic spray paint anywhere from 40-60psi. Full strength, don’t thin it.  It’s also great over paint. 2-3 light coats. Sand with a 400-600 grit in between if you’ve got texture but not necessary if it lays down smooth. Does not yellow unless it’s left to pool in an area. Drys fast and wears great!
Answered by: Katie
Date published: 2021-04-17

can I use this on a shelf I made out of spruce 2x4's? if so, how do I keep the wood looking as blonde as possible? thanks

Asked by: irv604
If you are using it indoor, it should work; just follow the instructions for the best finish.
Answered by: Jk78
Date published: 2020-07-16

Is this the same product as the varathane diamond "soft touch" interior matte (Ski 1000785170) - just different labels / gloss level?

Asked by: Alex
I’m not sure if it’s exactly the same, but it’s really close 
Answered by: Steve
Date published: 2022-07-16

I'm going to use this for refinish hardwood floor, but wondering if I can directly apply this right after I use the sander to remove old painting. Thanks

Asked by: maggie
It you are applying it to bare wood, it will work.
Answered by: Rust-Oleum Answers
Date published: 2020-08-07

Hi a couple questions. Is this suitable for bare pine tongue and groove walls and ceiling? Can this be sprayed? What is the appropriate respirator for spraying this?

Asked by: bert
It is perfect for bare pine. It’s water base so it does not have a harsh smell, I used it on home made poplar (aspen) cupboards, I used a paint brush and sanded smooth after the first coat, poplar tends to have fibres raise when wet, then light sanding if you apply a third coat, what I like the most of this finish is that it will not yellow the wood like the oil based polyurethane, 
Answered by: Wood working hobby
Date published: 2021-05-16

I repainted my kitchen cabinet doors with white Cabinet & Trim paint.  Is this product good as a last coat?

Asked by: Barb
Hi Barb, Yes, our Premium Wood Finish is a great choice as a top coat. We recommend waiting until your paint has dried hard before applying 3 coats of the clear for protection. Most importantly, test on a small area first as some clear coats may alter the appearance of these colours when applied.
Answered by: Rust-Oleum Answers
Date published: 2021-08-10
  • y_2024, m_2, d_29, h_9CST
  • bvseo_bulk, prod_bvqa, vn_bulk_3.0.38
  • cp_1, bvpage1
  • co_hasquestionsanswers, tq_289
  • loc_en_CA, sid_1000111893, prod, sort_[SortEntry(order=NUM_ANSWERS, direction=DESCENDING)]
  • clientName_homedepot-canada
  • bvseo_sdk, java_sdk, bvseo-4.0.0
  • CLOUD, getContent, 77ms
  • QUESTIONS, PRODUCT